Bug#321419: linux-image-2.6.12-1-686: irq11 makes eth0 problems (Was: Re: Bug#303550: kernel-image-2.6.11-1-686: irq11 makes eth0 problems)
hi all,
On Wed, Apr 13, 2005 at 11:46:53PM +0200, Daniel Ritz wrote:
> On Tuesday 12 April 2005 23:14, Philippe Bourcier wrote:
> > hi all,
> >
> > On Tue, Apr 12, 2005 at 12:05:02AM +0200, maximilian attems wrote:
> > > received another bug report concerning TI irq routing.
> > > your patch don't seem to fix this PCI1250 rev2.
> > > you'll find the bug report at
> > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=303550
> > >
> > > note that the previous bug report #270376 involved a PCI1220 (rev 02)
> > > thanks a lot again for your help.
> > > debian user seem to be a good user base for your patches. ;-)
> >
> > > --- reply to previous bug report follows
> >
> > > On Sun, 10 Apr 2005, Philippe Bourcier wrote:
> > >
> > > > On Sat, Apr 09, 2005 at 09:52:53PM +0200, maximilian attems wrote:
> > > > > could you tested the kernel-image at:
> > > > > http://charm.itp.tuwien.ac.at/~mattems/
> > > >
> > > > - the vga=791 boot parameter makes the system boot with a black
> > > > screen; if i switch to a console, i don't get one (graphical broken
> > > > screen);
> >
> > just with the above one: 2.6.11-ti-fix
> >
> > > > - the usb mouse doesn't work at all (console nor X);
> > >
> > > sorry i don't get you now,
> > > does this happen with any debian kernel or just with the one above?
> >
> > with 2.6.11-ti-fix and (sometimes...) with 2.6.11-1-686
> > (debian)
> >
> > Apr 12 21:40:05 ile kernel: Linux version 2.6.11-1-686 (dilinger@mouth) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Sun Apr 3 06:20:48 EDT 2005
> >
> > Apr 12 21:40:05 ile kernel: Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro
> >
> > Apr 12 21:40:38 ile kernel: [<c013242a>] __report_bad_irq+0x2a/0xa0
> > Apr 12 21:40:38 ile kernel: [<c0131ed0>] handle_IRQ_event+0x30/0x70
> > Apr 12 21:40:38 ile kernel: [<c0132530>] note_interrupt+0x70/0xb0
> > Apr 12 21:40:38 ile kernel: [<c0131ff0>] __do_IRQ+0xe0/0xf0
> > Apr 12 21:40:38 ile kernel: [<c0105279>] do_IRQ+0x19/0x30
> > Apr 12 21:40:38 ile kernel: [<c010391a>] common_interrupt+0x1a/0x20
> > Apr 12 21:40:38 ile kernel: [<c011cb6e>] __do_softirq+0x2e/0x90
> > Apr 12 21:40:38 ile kernel: [<c011cbf6>] do_softirq+0x26/0x30
> > Apr 12 21:40:38 ile kernel: [<c010527e>] do_IRQ+0x1e/0x30
> > Apr 12 21:40:38 ile kernel: [<c010391a>] common_interrupt+0x1a/0x20
> > Apr 12 21:40:38 ile kernel: eth0: interrupt(s) dropped!
> >
> > > have you installed hotplug? if not is mousedev and psmouse loaded?
> >
> > yes: hotplug 0.0.20040329-22 Linux Hotplug Scripts
> >
> > > can you send in the output of cat /proc/bus/input/devices
> > >
> > > > Apr 10 14:34:55 ile kernel: Linux version 2.6.11-ti-fix (root@aipc54) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Fri Apr 8 19:47:44 CEST 2005
> > > ..
> > > > Apr 10 14:34:55 ile kernel: Linux Kernel Card Services
> > > > Apr 10 14:34:55 ile kernel: options: [pci] [cardbus] [pm]
> > > > Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.0
> > > > Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.0 [0000:0000]
> > > > Apr 10 14:34:55 ile kernel: Yenta: Enabling burst memory read transactions
> > > > Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
> > > > Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI
> > > > Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.0, mfunc 0xcba97543, devctl 0x62
> > > > Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
> > > > Apr 10 14:34:55 ile kernel: Socket status: 30000010
> > > > Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.1
> > > > Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.1 [0000:0000]
> > > > Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
> > > > Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI
> > > > Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.1, mfunc 0xcba97543, devctl 0x62
> > > > Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11
> > > > Apr 10 14:34:55 ile kernel: Socket status: 30000010
> > > ..
> > > > Apr 10 14:35:16 ile kernel: eth0: 3Com 3c589, io 0x310, irq 9, hw_addr 00:00:86:52:4B:CB
> > > > Apr 10 14:35:16 ile kernel: 8K FIFO split 5:3 Rx:Tx, auto xcvr
> > > > Apr 10 14:35:16 ile kernel: program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
> > > > Apr 10 14:35:16 ile kernel: ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
> > > > Apr 10 14:35:21 ile kernel: eth0: flipped to 10baseT
> > > > Apr 10 14:35:23 ile xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable)
> > > > Apr 10 14:35:23 ile xfs: ignoring font path element /usr/lib/X11/fonts/CID (unreadable)
> > > > Apr 10 14:35:27 ile kernel: [<c01297b5>] __report_bad_irq+0x31/0x77
> > > > Apr 10 14:35:27 ile kernel: [<c012985f>] note_interrupt+0x4c/0x71
> > > > Apr 10 14:35:27 ile kernel: [<c0129476>] __do_IRQ+0x93/0xbd
> > > > Apr 10 14:35:27 ile kernel: [<c0104b35>] do_IRQ+0x19/0x24
> > > > Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20
> > > > Apr 10 14:35:27 ile kernel: [<c01189a4>] __do_softirq+0x2c/0x7d
> > > > Apr 10 14:35:27 ile kernel: [<c0118a17>] do_softirq+0x22/0x26
> > > > Apr 10 14:35:27 ile kernel: [<c0104b3a>] do_IRQ+0x1e/0x24
> > > > Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20
> > > > Apr 10 14:35:27 ile kernel: eth0: interrupt(s) dropped!
> > >
> > > urgs, thanks for your testing and feedback.
> >
>
> the ethernet cards irq is coming on the line of the cardbus bridge. this
> is because the CB_BRIDGE_INTR bit in the bridge control register
> isn't set. but there has been no relevant changes to yenta_socket in
> the 2.6.10 -> 2.6.11 timeframe as far as i can see. i think it could be
> a recent change to cs.c...i'm gonna read thru the code tomorrow or so..
> doesn't sound to hard.
I tried latest debian 2.6.12 kernel; see:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=321419
irq 11: nobody cared!
[<c01388fa>] __report_bad_irq+0x2a/0xa0
[<c013836d>] handle_IRQ_event+0x3d/0x70
[<c0138a12>] note_interrupt+0x82/0xa0
[<c0138490>] __do_IRQ+0xf0/0x100
[<c0105729>] do_IRQ+0x19/0x30
[<c0103ada>] common_interrupt+0x1a/0x20
[<c011f2ae>] __do_softirq+0x2e/0xa0
[<c011f346>] do_softirq+0x26/0x30
[<c010572e>] do_IRQ+0x1e/0x30
[<c0103ada>] common_interrupt+0x1a/0x20
handlers:
[<c8cddea0>] (usb_hcd_irq+0x0/0x80 [usbcore])
[<c8d00990>] (yenta_interrupt+0x0/0x40 [yenta_socket])
[<c8d00990>] (yenta_interrupt+0x0/0x40 [yenta_socket])
Disabling IRQ #11
eth0: interrupt(s) dropped!
ask more if you need,
--
/ \
((__-^^-,-^^-__))
.''`. Philippe BOURCIER `-_---' `---_-' .-.
: :' : http://bourcier.philippe.online.fr `--|o` 'o|--' /V\
`. `' \ ` / // \\
`- Linux Counter registered user #290012 ): :( /( )\
:o_o: ^^-^^
"-"
Reply to: