[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#311366: Upper USB port not working on Pegasos2



* maximilian attems <debian@sternwelten.at> [2005-05-31 23:30]:
> please send lspci -v and dmesg.

Attached.

> but i guess 2.6.12-rc5 may fix that.

I can test 2.6.12 once it's out and packages are available.
-- 
Martin Michlmayr
http://www.cyrius.com/
0000:00:00.0 Host bridge: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (rev 03)
	Flags: bus master, fast devsel, latency 0

0000:00:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
	Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
	Flags: bus master, medium devsel, latency 0, IRQ 9
	Memory at 80000000 (32-bit, non-prefetchable) [size=2K]
	I/O ports at 1080 [size=128]
	Capabilities: <available only to root>

0000:00:0c.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
	Flags: bus master, medium devsel, latency 0
	Capabilities: <available only to root>

0000:00:0c.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8f [Master SecP SecO PriP PriO])
	Flags: bus master, medium devsel, latency 0, IRQ 14
	I/O ports at 1000 [size=8]
	I/O ports at 100c [size=4]
	I/O ports at 1010 [size=8]
	I/O ports at 101c [size=4]
	I/O ports at 1020 [size=16]
	Capabilities: <available only to root>

0000:00:0c.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Flags: bus master, medium devsel, latency 22, IRQ 9
	I/O ports at 1040 [size=32]
	Capabilities: <available only to root>

0000:00:0c.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Flags: bus master, medium devsel, latency 22, IRQ 9
	I/O ports at 1060 [size=32]
	Capabilities: <available only to root>

0000:00:0c.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
	Flags: medium devsel
	Capabilities: <available only to root>

0000:00:0c.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40)
	Flags: medium devsel, IRQ 9
	I/O ports at 1100 [size=256]
	I/O ports at 1030 [size=4]
	I/O ports at 1034 [size=4]
	Capabilities: <available only to root>

0000:00:0c.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 20)
	Flags: medium devsel, IRQ 9
	I/O ports at 1200 [size=256]
	Capabilities: <available only to root>

0000:00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51)
	Subsystem: Unknown device 3065:1106
	Flags: bus master, medium devsel, latency 0, IRQ 9
	I/O ports at 1300 [size=256]
	Memory at 80000800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <available only to root>

0001:01:00.0 Host bridge: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller (rev 03)
	Flags: bus master, 66MHz, medium devsel, latency 0

0001:01:08.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA])
	Subsystem: ABIT Computer Corp.: Unknown device 6191
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 9
	Memory at c0000000 (32-bit, prefetchable) [size=128M]
	I/O ports at ffff1000 [size=256]
	Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at c8020000 [disabled] [size=128K]
	Capabilities: <available only to root>

0001:01:08.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
	Subsystem: ABIT Computer Corp.: Unknown device 6190
	Flags: 66MHz, medium devsel
	Memory at d0000000 (32-bit, prefetchable) [disabled] [size=128M]
	Memory at c8010000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <available only to root>

Total memory = 256MB; using 512kB for hash table (at c0380000)
Linux version 2.6.11-powerpc (sven@pegasos2) (version gcc 3.3.6 (Debian 1:3.3.6-4)) #1 Fri May 13 15:47:19 CEST 2005
Pegasos l2cr : L2 cache was not active, activating
PCI bus 0 controlled by pci at 80000000
PCI bus 0 controlled by pci at c0000000
On node 0 totalpages: 65536
  DMA zone: 65536 pages, LIFO batch:16
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/mapper/root
PID hash table entries: 2048 (order: 11, 32768 bytes)
time_init: decrementer frequency = 33.333333 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 250752k available (1980k kernel code, 1160k data, 188k init, 0k highmem)
Calibrating delay loop... 665.60 BogoMIPS (lpj=332800)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4809k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1117214742.232:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: No ATY,RefCLK property !
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz
radeonfb: PLL min 20000 max 40000
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 90x25
radeonfb (0001:01:08.0): ATI Radeon Yd 
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: Macintosh mouse button emulation
Warning: no ADB interface detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 188k init 60k pmac 32k prep
NET: Registered protocol family 1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
VP_IDE: IDE controller at PCI slot 0000:00:0c.1
VP_IDE: chipset revision 6
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:0c.1
VP_IDE: 100% native mode on irq 14
    ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: ST340014A, ATA DISK drive
ide0 at 0x1000-0x1007,0x100e on irq 14
Probing IDE interface ide1...
hdc: IC35L080AVVA07-0, ATA DISK drive
hdd: SAMSUNG CDRW/DVD SM-352B, ATAPI CD/DVD-ROM drive
ide1 at 0x1010-0x1017,0x101e on irq 15
hda: max request size: 1024KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: RDSK (512) p1 (EXT^C)(res 2 spb 1) p2 (SWP^@)(res 2 spb 1) p3 (EXT^C)(res 2 spb 1) p4 (LNX^@)(res 2 spb 1) p5 (LNX^@)(res 2 spb 1)
hdc: max request size: 128KiB
hdc: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hdc: cache flushes supported
 /dev/ide/host0/bus1/target0/lun0: RDSK (512) p1 (LNX^@)(res 2 spb 1)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
loop: loaded (max 8 devices)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on dm-0, internal journal
hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
MV-643xx 10/100/1000 Ethernet Driver
eth0: port 1 with MAC address 00:2b:2f:de:ad:01
eth0: RX NAPI Enabled 
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ieee1394: Initialized config rom entry `ip1394'
ts: Compaq touchscreen protocol output
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdd: DMA disabled
ide1: reset: success
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide1: reset: success
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2931852k swap on /dev/mapper/swap.  Priority:-1 extents:1
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:00:01.0 (0000 -> 0003)
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[80000000-800007ff]  Max Packet=[2048]
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)
eth1: VIA Rhine II at 0x80000800, 00:0b:2f:42:c7:9c, IRQ 9.
eth1: MII PHY found at address 16, status 0x786d advertising 01e1 Link 0020.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:0c.2 (0000 -> 0001)
uhci_hcd 0000:00:0c.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:0c.2: irq 9, io base 0x1040
uhci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011060000004b2f]
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:0c.3 (0000 -> 0001)
uhci_hcd 0000:00:0c.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
eth1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
uhci_hcd 0000:00:0c.3: irq 9, io base 0x1060
uhci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
vt596_smbus 0000:00:0c.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1
PCI: Enabling device 0000:00:0c.5 (0000 -> 0001)
PCI: Enabling device 0000:00:0c.6 (0000 -> 0001)
VIA 82xx Modem: probe of 0000:00:0c.6 failed with error -13
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2048 buckets, 16384 max) - 216 bytes per conntrack
eth1: link up, 10Mbps, half-duplex, lpa 0x0020
NET: Registered protocol family 10
Disabled Privacy Extensions on device c028d5c4(lo)
IPv6 over IPv4 tunneling driver

Reply to: