I installed Sarge (2.6.8-2-686) and ran into the same issue, exactly. My
root is on a scsi drive and I have an ide that is used for other
stuff...
The Debian installer recognizes all of the drives, lets me partition
them, set up mounts, etc... but when booting it's as though the ide is
not there.
Adding 'ide-detect' to /etc/modules (along with 'ide-disk' and
'ide-generic', though I haven't tested to see what is the minimal
requirement) resolves this.
Since my scsi/ide drive combo has not been an issue in other flavors of
Linux, and given the 'testing' nature of Sarge, I'd chalk this up as an
oversight in the installer.
If anyone lurking would care to provide me with a pointer to a HOWTO
search for and file bugs, I'd be glad to add this to the TODO list.
gj
-----Original Message-----
From: Anthony Tippett [mailto:atippett@etomic.net]
Sent: Friday, March 18, 2005 2:22 AM
To: debian-kernel@lists.debian.org; debian-user@lists.debian.org
Subject: kernel 2.6.10 upgrade and ide drives go missing
After doing an update from debian unsable all my ide drives went
missing.
I rebooted and all my ide drives were missing and didn't get detected.
Luckily, my root partition is on a Silicon RAID bus controller and
that
was loaded.
When I manually loaded ide_generic and ide_disk, it loaded my cdrom,
dvd
drive and my 2 other ide drives. Before the update, these modules
were
getting loaded automatically. Anyone know of any issues with the new
kernel? Some information provided below.
atippett@act:~$ dpkg -l |grep hal
ii hal 0.4.7-2 Hardware Abstraction Layer
ii libhal-storage 0.4.7-2 Hardware Abstraction Layer - shared
library
ii libhal0 0.4.7-2 Hardware Abstraction Layer - shared
library
atippett@act:~$ dpkg -l |grep udev
ii udev 0.054-3 /dev/ management daemon
atippett@act:~$ dpkg -l |grep hotplug
ii hotplug 0.0.20040329-1 Linux Hotplug Scripts
atippett@act:~$ dpkg -l |grep initrd
ii initrd-tools 0.1.77 tools to create initrd image for
prepackaged
atippett@act:~$ dpkg -l |grep kernel
ii autofs 4.1.3+4.1.4bet kernel-based automounter for Linux
ii fglrx-kernel-s 8.10.19-1 Kernel module source for the ATI
graphics ac
ii iptables 1.2.11-10 Linux kernel 2.4+ iptables
administration to
ii kernel-doc-2.6 2.6.10-6 Linux kernel specific documentation
for vers
ii kernel-headers 101 Linux kernel headers 2.6 on AMD K7
ii kernel-headers 2.6.10-6 Header files related to Linux kernel
version
ii kernel-headers 2.6.10-6 Linux kernel headers 2.6.10 on AMD
K7
ii kernel-headers 2.6.8-13 Header files related to Linux kernel
version
ii kernel-headers 2.6.8-13 Linux kernel headers 2.6.8 on AMD K7
ii kernel-image-2 101 Linux kernel image for version 2.6
on
AMD K7
ii kernel-image-2 2.6.10-6 Linux kernel image for version
2.6.10
on AMD
ii kernel-image-2 2.6.8-13 Linux kernel image for version 2.6.8
on AMD
ii kernel-kbuild- 2.6.8-2 Linux kernel 2.6 kbuild tools
ii kernel-package 8.126 A utility for building Linux kernel
related
ii kernel-patch-d 2.6.10-6 Debian patches to Linux 2.6.10
ii kernel-source- 2.6.10-6 Linux kernel source for version
2.6.10
with
ii kernel-source- 2.6.8-14 Linux kernel source for version
2.6.8
with D
ii kernel-tree-2. 2.6.10-6 Linux kernel source tree for
building
Debian
ii linux-kernel-h 2.5.999-test7- Linux Kernel Headers for development
ii module-init-to 3.2-pre1-2 tools for managing Linux kernel
modules
ii nfs-kernel-ser 1.0.7-1 Kernel NFS server support
ii openswan-modul 2.3.0-2 IPSEC kernel modules source for
Openswan
atippett@act:~$
atippett@act:~$ uname -a
Linux act 2.6.10-1-k7 #1 Fri Mar 11 03:13:32 EST 2005 i686 GNU/Linux
atippett@act:~$ lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller
1
(rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller
4
(rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller
3
(rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller
2
(rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller
5
(rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev
a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller
(rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce
MultiMedia audio [Via VT82C686B] (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI
Bridge
(rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire
(IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:07.0 Multimedia audio controller: Creative Labs SB Live!
EMU10k1
(rev 05)
0000:01:07.1 Input device controller: Creative Labs SB Live! MIDI/Game
Port (rev 05)
0000:01:0a.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 02)
0000:01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 02)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller
(rev
02)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc Radeon
R300
ND [Radeon 9700 Pro]
0000:02:00.1 Display controller: ATI Technologies Inc Radeon R300
[Radeon 9700 Pro] (Secondary)
atippett@act:~$
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org