Bug#279244: hda1 not recognized
Package: kernel-image-2.6.8-1-386
Version: 2.6.8-4
I have just installed sarge netinstall rc2 on /dev/hdb1 , and when i
boot it i can't access to any filesystem on hda.
From dmesg i see:
hda: MAXTOR 6L060J3, ATA DISK drive
hdb: Maxtor 6Y160P0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 117266688 sectors (60040 MB) w/1819KiB Cache, CHS=65535/16/63,
UDMA(100)
/dev/ide/host0/bus0/target0/lun0: [CUMANA/ADFS] p1hdb: max request
size: 1024KiB
hdb: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63,
UDMA(100)
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 >
hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
hdd: ASUS CRW-1610A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
NTFS driver 2.1.15 [Flags: R/O MODULE].
But hda is not partitioned this way, but this ( with 2.4.27 i can access
to hda ):
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
The problem is that the kernel reports CUMANA/ADFS
When i try to mount everything a part from hda1 ( that is recognized,
but i can't access it ), i see:
/dev/hda* : not a valid block device
For /dev/hda1 ( windows xp ), i see:
mount: wrong fs type, bad option, bad superblock on /dev/hda1,
or too many mounted file systems
NTFS-fs error (device hda1): read_ntfs_boot_sector(): Primary boot
sector is invalid.
NTFS-fs error (device hda1): read_ntfs_boot_sector(): Mount option
errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hda1): ntfs_fill_super(): Not an NTFS volume.
When i tried to use kernel 2.6.8 after having installed sarge with
2.4.27, i saw that dmesg was filled with a list of:
ide0: reset: success
hda: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: task_in_intr: error=0x04 { DriveStatusError }
hda: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: task_in_intr: error=0x04 { DriveStatusError }
hda: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: task_in_intr: error=0x04 { DriveStatusError }
hda: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: task_in_intr: error=0x04 { DriveStatusError }
System: Pentium 4 1800 Mhz 256 mb ram.
Reply to: