Bug#276020: kernel-image-2.6.8-1-686: wvdial and wvdialconf cannot access ext modem via serial port with 2.6.x kernel
Package: kernel-image-2.6.8-1-686
Version: 2.6.8-4
Severity: important
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.26-1-686
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel-image-2.6.8-1-686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii fileutils 5.2.1-2 The GNU file management utilities
ii initrd-tools 0.1.74 tools to create initrd image for p
ii module-init-tools 3.1-pre6-1 tools for managing Linux kernel mo
-- no debconf information
wvdial and wvdialconf cannot seem to communicate with external RS-232
modems hooked to the serial ports on a Dell Optiplex GX-100. Machine
is 500MHz Celeron. SAME machine, wvdial and wvdialconf work fine
using kernel 2.4.22->26. Oddly enough, minicom seems to be able to
talk to the modems under kernel 2.6.8. I don't know what to make of
this.
Below find additional details.
##uname -a for kernel 2.4.26
Linux rutabaga 2.4.26-1-686 #1 Tue Aug 24 13:46:05 JST 2004 i686 GNU/Linux
##uname -a for kernel 2.6.8
Linux rutabaga 2.6.8-1-686 #1 Thu Oct 7 03:15:25 EDT 2004 i686 GNU/Linux
##wvdialconf messages when it fails under kernel 2.6.8:
Port Scan<*1>: Scanning ttyS0 first, /dev/modem is a link to it.
ttyS0<*1>: ATQ0 V1 E1 --
ttyS0<*1>: failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 --
ttyS0<*1>: failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- 1
ttyS0<*1>: and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 --
ttyS1<*1>: failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2 S3
##wvdialconf messages when it succeeds under kernel 2.4.26:
Port Scan<*1>: Scanning ttyS0 first, /dev/modem is a link to it.
ttyS0<*1>: ATQ0 V1 E1 -- OK
ttyS0<*1>: ATQ0 V1 E1 Z -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: Modem Identifier: ATI -- 5601
ttyS0<*1>: Speed 4800: AT -- OK
ttyS0<*1>: Speed 9600: AT -- OK
ttyS0<*1>: Speed 19200: AT -- OK
ttyS0<*1>: Speed 38400: AT -- OK
ttyS0<*1>: Speed 57600: AT -- OK
ttyS0<*1>: Speed 115200: AT -- OK
ttyS0<*1>: Max speed is 115200; that should be safe.
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS1<*1>: ATQ0 V1 E1 -- ô
ttyS1<*1>: failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- OK
ttyS1<*1>: ATQ0 V1 E1 Z -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS1<*1>: Modem Identifier: ATI -- 247
ttyS1<*1>: Max speed is 115200; that should be safe.
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Port Scan<*1>: S3
ttyS0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyS1<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
##dmesg "tty" messages for kernel 2.4.26
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
##dmesg "tty" messages for kernel 2.6.8
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
##dpkg listing for kernel 2.4.26
ii kernel-image-2.4.26-1-686 2.4.26-6 Linux kernel image for version 2.4.26 on PPro/Celeron/PII/PIII/PIV.
##dpkg listing for kernel 2.6.8
ii kernel-image-2.6.8-1-686 2.6.8-4 Linux kernel image for version 2.6.8 on PPro/Celeron/PII/PIII/PIV.
##lsmod output for kernel .2.4.26
Module Size Used by Not tainted
binfmt_misc 6020 1
mousedev 4404 0 (unused)
hid 22340 0 (unused)
input 3680 0 [mousedev hid]
af_packet 13608 1 (autoclean)
uhci 26064 0 (unused)
usbcore 64064 1 [hid uhci]
i810_rng 2720 0 (unused)
es1371 27368 0 (unused)
ac97_codec 13736 0 [es1371]
soundcore 3908 4 [es1371]
gameport 1676 0 [es1371]
3c59x 27504 1
dm-mod 49464 0 (unused)
rtc 7228 0 (autoclean)
ext3 83468 1 (autoclean)
jbd 42880 1 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
piix 9120 1 (autoclean)
ide-disk 17184 2 (autoclean)
ide-core 112140 2 (autoclean) [ide-detect piix ide-disk]
unix 15688 7 (autoclean)
##lsmod output for kernel 2.6.8
Module Size Used by
binfmt_misc 11688 1
ipv6 264612 8
af_packet 22600 2
3c59x 39368 0
snd_ens1371 24932 0
snd_rawmidi 25156 1 snd_ens1371
snd_seq_device 8200 1 snd_rawmidi
snd_pcm 98728 1 snd_ens1371
snd_page_alloc 11752 1 snd_pcm
snd_timer 25668 1 snd_pcm
snd_ac97_codec 70020 1 snd_ens1371
snd 57156 6 snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec
es1371 37440 0
gameport 4704 2 snd_ens1371,es1371
uhci_hcd 33136 0
usbcore 119012 3 uhci_hcd
pci_hotplug 34640 0
hw_random 5460 0
intel_agp 22816 1
agpgart 34696 1 intel_agp
pcspkr 3592 0
tsdev 7392 0
mousedev 10476 1
psmouse 20360 0
floppy 61200 0
parport_pc 35392 0
parport 41832 1 parport_pc
evdev 9600 0
dm_mod 59772 0
capability 4520 0
commoncap 7232 1 capability
i810_audio 37588 0
ac97_codec 18956 2 es1371,i810_audio
soundcore 10336 3 snd,es1371,i810_audio
rtc 12760 0
ext3 127240 1
jbd 62616 1 ext3
mbcache 9348 1 ext3
ide_generic 1408 0
piix 13440 1
ide_disk 19296 3
sd_mod 21696 0
ata_piix 8164 0
libata 41604 1 ata_piix
scsi_mod 125196 2 sd_mod,libata
unix 28692 14
font 8320 0
vesafb 6656 0
cfbcopyarea 3840 1 vesafb
cfbimgblt 3040 1 vesafb
cfbfillrect 3776 1 vesafb
ide_core 139940 3 ide_generic,piix,ide_disk
##lspci for kernel 2.4.26
0000:00:00.0 Host bridge: Intel Corp. 82810 DC-100 GMCH [Graphics Memory Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810 DC-100 CGC [Chipset Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:01:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)
0000:01:08.0 Serial controller: Lava Computer mfg Inc: Unknown device 0a00
0000:01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
##lspci for kernel 2.6.8
0000:00:00.0 Host bridge: Intel Corp. 82810 DC-100 GMCH [Graphics Memory Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810 DC-100 CGC [Chipset Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:01:07.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)
0000:01:08.0 Serial controller: Lava Computer mfg Inc: Unknown device 0a00
0000:01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
##dmesg for 2.4.26 kernel:
Linux version 2.4.26-1-686 (horms@tabatha) (gcc version 3.2.3 (Debian)) #1 Tue Aug 24 13:46:05 JST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007eae000 (usable)
BIOS-e820: 0000000007eae000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
126MB LOWMEM available.
On node 0 totalpages: 32430
zone(0): 4096 pages.
zone(1): 28334 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 DELL ) @ 0x000fd790
ACPI: RSDT (v001 DELL GX100 0x00000007 ASL 0x00000061) @ 0x000fd7a4
ACPI: FADT (v001 DELL GX100 0x00000007 ASL 0x00000061) @ 0x000fd7cc
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000
Kernel command line: BOOT_IMAGE=Linux.2.4 ro root=301
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 498.842 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 996.14 BogoMIPS
Memory: 121576k/129720k available (1241k kernel code, 7760k reserved, 462k data, 116k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 498.8425 MHz.
..... host bus clock speed is 66.5121 MHz.
cpu: 0, clocks: 665121, slice: 332560
CPU0<T0:665120,T1:332560,D:0,S:332560,C:665121>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2410] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 10 for device 01:08.0
PCI: Sharing IRQ 10 with 00:1f.3
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4116 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
Freeing initrd memory: 4116k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
ICH: IDE controller at PCI slot 00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 30768H1, ATA DISK drive
blk: queue c882aac0, I/O limit 4095Mb (mask 0xffffffff)
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 15007104 sectors (7684 MB) w/512KiB Cache, CHS=14888/16/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [934/255/63] p1 p2
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 658656k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
Intel 810 + AC97 Audio, version 0.24, 13:50:01 Aug 24 2004
device-mapper: 4.1.1-ioctl (2004-04-07) initialised: dm-devel@redhat.com
PCI: Found IRQ 5 for device 01:0c.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
01:0c.0: 3Com PCI 3c905C Tornado at 0xec00. Vers LK1.1.18-ac
00:b0:d0:2c:bf:8c, IRQ 5
product code 0000 rev 00.14 date 07-03-97
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
01:0c.0: scatter/gather enabled. h/w checksums enabled
es1371: version v0.32 time 13:50:39 Aug 24 2004
PCI: Found IRQ 9 for device 01:07.0
PCI: Sharing IRQ 9 with 00:01.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09
es1371: found es1371 rev 9 at io 0xecc0 irq 9
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
i810_rng hardware driver 0.9.8 loaded
hw_random: misc device register failed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:1f.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x680/0x2) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [0680:0002] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
##dmesg for kernel 2.6.8
Linux version 2.6.8-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 Thu Oct 7 03:15:25 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007eae000 (usable)
BIOS-e820: 0000000007eae000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
126MB LOWMEM available.
On node 0 totalpages: 32430
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28334 pages, LIFO batch:6
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fd790
ACPI: RSDT (v001 DELL GX100 0x00000007 ASL 0x00000061) @ 0x000fd7a4
ACPI: FADT (v001 DELL GX100 0x00000007 ASL 0x00000061) @ 0x000fd7cc
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux.2.6 ro root=301 hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 512 (order 9: 4096 bytes)
Detected 498.942 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 120940k/129720k available (1542k kernel code, 8232k reserved, 684k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 987.13 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 498.0750 MHz.
..... host bus clock speed is 66.0499 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4496k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
pnp: 00:00: ioport range 0x800-0x8df could not be reserved
pnp: 00:00: ioport range 0xc00-0xc7f has been reserved
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 10 (level, low) -> IRQ 10
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4496 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
ide_setup: hdc=ide-scsi
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
ICH: IDE controller at PCI slot 0000:00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 30768H1, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 15007104 sectors (7683 MB) w/512KiB Cache, CHS=14888/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124 (blacklisted)
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 658656k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
Intel 810 + AC97 Audio, version 1.01, 03:31:49 Oct 7 2004
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i810 DC100 Chipset.
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xf8000000
hw_random hardware driver 1.0.0 loaded
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.2: Intel Corp. 82801AA USB
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 11, io base 0000ff80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
es1371: version v0.32 time 03:31:55 Oct 7 2004
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 9 (level, low) -> IRQ 9
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x09
es1371: found es1371 rev 9 at io 0xecc0 irq 9 joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:0c.0: 3Com PCI 3c905C Tornado at 0xec00. Vers LK1.1.19
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fbd80(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Reply to: