Bug#264633: kernel-image-2.6.7-1-686: modules.pcimap directs hotplug to use snd-cs46xx where snd-cs4236 should be used
Package: kernel-image-2.6.7-1-686
Version: 2.6.7-2
Severity: normal
hotplug goes by the modules.pcimap to determine which modules to load.
The modules.pcimap indicates that the sound card should use the snd-cs46xx
driver. Upon loading that module, it indicates otherwise.
lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0b.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
0000:00:0d.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01)
0000:00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
0000:00:10.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
lspci -n
0000:00:00.0 0600: 8086:7190 (rev 02)
0000:00:01.0 0604: 8086:7191 (rev 02)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0b.0 0401: 1013:6001 (rev 01)
0000:00:0d.0 0700: 12b9:1008 (rev 01)
0000:00:0f.0 0200: 1011:0014 (rev 21)
0000:00:10.0 0c03: 1106:3038 (rev 50)
0000:00:10.1 0c03: 1106:3038 (rev 50)
0000:00:10.2 0c03: 1106:3104 (rev 51)
0000:01:00.0 0300: 1002:4742 (rev 5c)
And now I can't find the relevant error message from the kernel logs.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.7-1-686
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel-image-2.6.7-1-686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii fileutils 5.2.1-2 The GNU file management utilities
ii initrd-tools 0.1.71 tools to create initrd image for p
ii module-init-tools 3.1-pre5-3 tools for managing Linux kernel mo
-- no debconf information
Reply to: