Bug#263316: kernel-image-2.6.7-1-686-smp: kobject_register oops during modprobe
Package: kernel-image-2.6.7-1-686-smp
Severity: normal
On a newly-installed Dell PowerEdge 2600 I get the following on boot:
hw_random hardware driver 1.0.0 loaded
kobject_register failed for aic79xx (-17)
[kobject_register+91/96] kobject_register+0x5b/0x60
[bus_add_driver+80/176] bus_add_driver+0x50/0xb0
[pci_register_driver+110/160] pci_register_driver+0x6e/0xa0
[__crc_msleep+1554966/6815478] ahd_linux_pci_init+0xf/0x20 [aic79xx]
[__crc_msleep+1518092/6815478] ahd_linux_detect+0x45/0x90 [aic79xx]
[__crc_pm_idle+1110416/5541136] ahd_linux_init+0xf/0x22 [aic79xx]
[sys_init_module+280/576] sys_init_module+0x118/0x240
[sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Unable to handle kernel paging request at virtual address f9bdf67c
printing eip:
c01b3b60
*pde = 3601e067
*pte = 00000000
Oops: 0002 [#1]
PREEMPT SMP
Modules linked in: eepro100 piix hw_random uhci_hcd usbcore pciehp shpchp pci_hotplug evdev e100 mii e1000 cfi_cmdset_0001 jedec_probe gen_probe ich2rom mtdcore chipreg capability commoncap bonding ide_cd ide_core cdrom rtc isofs reiserfs sd_mod megaraid aic7xxx scsi_mod unix font vesafb cfbcopyarea cfbimgblt cfbfillrect
CPU: 0
EIP: 0060:[kobject_add+112/256] Not tain
ted
EFLAGS: 00010292 (2.6.7-1-686-smp)
EIP is at kobject_add+0x70/0x100
eax: c030cea4 ebx: f9b3d400 ecx: f9bdf67c edx: f9b3d41c
esi: ffffffea edi: c030ceac ebp: f9b3d3e4 esp: f635df3c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 1855, threadinfo=f635c000 task=f61a91e0)
Stack: c030ceac f9b3d400 f9b3d400 ffffffea 00000000 c01b3c18 f9b3d400 f9b3d400
c030ce40 f9b3d400 c030ce40 c0204340 f9b3d400 f9b3a89a f9b3d3c0 00000001
f9b3d460 c02d4784 c01be5ce f9b3d3e4 c02d47a0 f9b3d9e0 f635c000 f8a1f01c
Call Trace:
[kobject_register+40/96] kobject_register+0x28/0x60
[bus_add_driver+80/176] bus_add_driver+0x50/0xb0
[pci_register_driver+110/160] pci_register_driver+0x6e/0xa0
[__crc_pm_idle+1110429/5541136] eepro100_init_module+0x1c/0x28 [eepro100]
[sys_init_module+280/576] sys_init_module+0x118/0x240
[sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71
Code: 89 11 89 4a 04 8b 43 28 8b 30 8d 4e 48 89 c8 ba ff ff 00 00
The machine continues to boot happily, however.
When I boot a Dell PowerEdge 2650, however, it produces similar problems
trying to modprobe for aic7xxx and hangs (sorry I can't provide a trace -
it never gets to mount a filesystem). It doesn't have an Adaptec SCSI card.
Note that there is no problem booting with kernel-image-2.6.6-2-686-smp on
either of these machines.
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.7-1-686
Locale: LANG=en_GB, LC_CTYPE=en_GB
This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
Reply to: