Re: half duplex
I have done "mii-tool -v", here is the outcome
eth0: negotiated 100baseTx-HD, link ok
product info: vendor 00:40:63, model 50 rev 8
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-HD 10baseT-HD
I think the hub does support full duplex. It is netgear dual speed hub model DS104.
On 7/29/05, Dietz Proepper <dietz@rotfl.franken.de> wrote:
larinia:
> ehm, thank you all very much, I will try to connect my laptop directly
> with the modem and see if there is any difference.
You need another cable (or a rather intelligent nic or modem;) for this.
> Does half duplex make the network traffic slower?
It does. But as I already said, this should not matter in your situation,
because that bridge (or modem or whatever) will be the bottleneck.
Therefore, simply leave it as it is.
--
To UNSUBSCRIBE, email to debian-kde-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
--
Lei Angelina Yu
Reply to: