Re: Problems with kdm, and building kdebase from KDE_3_0_BRANCH
On Sat, 2002-09-07 at 04:36, Ray Dougharty wrote:
> I had these problems and solved it by changing the following three
> entries in the kdmrc file ( Mine is located in /etc/kde3/kdm/ ).
>
> SessionTypes=kde3,default,failsafe,
> PidFile=/var/run/kdm.pid
> AuthDir=/var/lib/kdm/authdir
>
> Hope it helps
I replaced/added these where apropriate in the kdmrc file, but I still have the same problem.
I have attached my kdmrc..
--
David Stanaway
# KDM configuration example.
# Note, that all comments will be lost if you change this file with
# the kcontrol frontend.
#
# Definition: the greeter is the login dialog, i.e., the part of KDM
# which the user sees.
#
# You can configure every X-display individually.
# Every display has a display name, which consists of a host name
# (which is empty for local displays), a colon and a display number.
# Additionally, a display belongs to a display class (which can be
# ignored in most cases; the kcontrol config frontend does not support
# this feature at all).
# Sections with display-specific settings have the formal syntax
# "[X-" host [":" number [ "_" class ]] "-" sub-section "]"
# You can use the "*" wildcard for host, number and class. You may omit
# trailing components; they are assumed to be "*" then.
# The host part may be a domain specification like ".inf.tu-dresden.de".
# From which section a setting is actually taken is determined by these
# rules:
# - an exact match takes precedence over a partial match (for the host part),
# which in turn takes precedence over a wildcard
# - precedence decreases from left to right for equally exact matches
# Example: display name "myhost:0", class "dpy".
# [X-myhost:0_dpy] precedes
# [X-myhost:0_*] (same as [X-myhost:0]) precedes
# [X-myhost:*_dpy] precedes
# [X-myhost:*_*] (same as [X-myhost]) precedes
# [X-*:0_dpy] precedes
# [X-*:0_*] (same as [X-*:0]) precedes
# [X-*:*_*] (same as [X-*])
# These sections do NOT match this display:
# [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*]
# If a setting is not found in any matching section, the default is used.
#
# Every comment applies to the following section or key.
#
# Greeter background
# XXX do this on a per-display basis: should be [X-*-Desktop]
# HELPME: I need help with kbackgroundrenderer! -- ossi@kde.org
[Desktop0]
BackgroundMode=Wallpaper
BlendBalance=100
BlendMode=NoBlending
ChangeInterval=60
Color1=30,114,160
Color2=192,192,192
CurrentWallpaper=0
LastChange=0
MinOptimizationDepth=1
MultiWallpaperMode=NoMulti
Pattern=
Program=
UseSHM=false
ReverseBlending=false
Wallpaper=debian.jpg
WallpaperList=
WallpaperMode=Scaled
[General]
# If "false", KDM won't daemonize after startup. Use this, if you start
# KDM from inittab with the respawn instruction. Default is true.
#DaemonMode=false
# If the value starts with a slash (/), it specifies the file, where X-servers
# to be used by KDM are listed; the file is in the usual XDM-Xservers format.
# Otherwise it's interpreted like one line of the Xservers file, i.e., it
# specifies exactly one X-server.
# Default is ":0 local@tty1 /usr/X11R6/bin/X vt7"
# XXX i'm planning to absorb this file into kdmrc, but i'm not sure how to
# do this best.
Xservers=/usr/X11R6/lib/X11/xdm/Xservers
# Where KDM should store its PID. Default is "" (don't store)
PidFile=/var/run/kdm.pid
# Whether KDM should lock the pid file to prevent having multiple KDM
# instances running at once. Leave it "true", unless you're brave.
#LockPidFile=false
# Where to store authorization files. Default is /var/run/xauth
AuthDir=/var/lib/kdm/authdir
# Whether KDM should automatically re-read configuration files, if it
# finds them having changed. Just keep it "true".
#AutoRescan=false
# Additional environment variables KDM should pass on to kdm_config, kdm_greet,
# Xsetup, Xstartup, Xsession, and Xreset. LD_LIBRARY_PATH is a good candidate;
# otherwise it shouldn't be necessary very often.
#ExportList=SOME_VAR,ANOTHER_IMPORTANT_VAR
# Where the command FiFos should be created. Make it empty to disable
# the FiFos. Default is /var/run/xdmctl
#FifoDir=/tmp
# To which group the command FiFos should belong.
# Default is -1 (effectively root)
#FifoGroup=xdmctl
[Xdmcp]
# Whether KDM should listen to XDMCP requests. Default is true.
Enable=false
# The UDP port KDM should listen on for XDMCP requests. Don't change the 177.
#Port=177
# File with the private keys of X-terminals. Required for XDM authentication.
# Default is /etc/kde3/kdm/kdmkeys
KeyFile=/etc/kde3/kdm/xdm-keys
# XDMCP access control file in the usual XDM-Xaccess format.
# Default is /etc/kde3/kdm/Xaccess
# XXX i'm planning to absorb this file into kdmrc, but i'm not sure how to
# do this best.
Xaccess=/usr/X11R6/lib/X11/xdm/Xaccess
# Number of seconds to wait for display to respond after the user has
# selected a host from the chooser. Default is 15.
#ChoiceTimeout=10
# Strip domain name from remote display names if it is equal to the local
# domain. Default is true
#RemoveDomainname=false
# Use the numeric IP address of the incoming connection instead of the
# host name. Use this on multihomed hosts. Default is false
#SourceAddress=true
# The program which is invoked to dynamically generate replies to XDMCP
# BroadcastQuery requests.
# By default no program is invoked and "Willing to manage" is sent.
Willing=su nobody -c /usr/X11R6/lib/X11/xdm/Xwilling
[Shutdown]
# The command to run to halt the system. Default is /sbin/halt
#HaltCmd=
# The command to run to reboot the system. Default is /sbin/reboot
#RebootCmd=
# Whether one can shut down the system via the global command FiFo.
# Default is false
#AllowFifo=true
# Whether one can abort still running sessions when shutting down the system
# via the global command FiFo. Default is true
#AllowFifoNow=false
# Rough estimations about how many seconds KDM will spend at most on
# - opening a connection to the X-server (OpenTime):
# OpenRepeat * (OpenTimeout + OpenDelay)
# - starting a local X-server (SeverTime): ServerAttempts * ServerTimeout
# - starting a display:
# - local display: StartAttempts * (ServerTime + OpenTime)
# - remote/foreign display: StartAttempts * OpenTime
# Core config for all displays
[X-*-Core]
# How long to wait before retrying to start the display after various
# errors. Default is 15
#OpenDelay=
# How long to wait before timing out XOpenDisplay. Default is 120
#OpenTimeout=
# How often to try the XOpenDisplay. Default is 5
#OpenRepeat=
# Try at most that many times to start a display. If this fails, the display
# is disabled. Default is 4
#StartAttempts=
# The StartAttempt counter is reset after that many seconds. Default is 30
#StartInterval=
# Ping remote display every that many minutes. Default is 5
#PingInterval=
# Wait for a Pong that many minutes. Default is 5
#PingTimeout=
# Restart instead of resetting the local X-server after session exit.
# Use it if the server leaks memory, etc. Default is false
#TerminateServer=true
# The signal needed to reset the local X-server. Default is 1 (SIGHUP)
#ResetSignal=
# The signal needed to terminate the local X-server. Default is 15 (SIGTERM)
#TermSignal=
# Need to reset the X-server to make it read initial Xauth file.
# Default is false
#ResetForAuth=true
# Create X-authorizations for local displays. Default is true
#Authorize=false
# Which X-authorization mechanisms should be used.
# Default is XDM-AUTHORIZATION-1,MIT-MAGIC-COOKIE-1
#AuthNames=
# The name of this X-server's Xauth file. Default is "", which means, that
# a random name in the AuthDir directory will be used.
#AuthFile=
# Specify a file with X-resources for the greeter, chooser and background.
# The KDE frontend doesn't care for this, so you don't need it unless you
# use an alternative chooser or another background generator than kdmdesktop.
# Default is ""
Resources=/usr/X11R6/lib/X11/xdm/Xresources
# The xrdb program to use to read the above specified recources.
# Default is /usr/X11R6/bin/xrdb
#Xrdb=
# A program to run before the greeter is shown. You should start kdmdesktop
# there. Also, xconsole can be started by this script.
# Default is ""
Setup=/etc/kde3/kdm/Xsetup
# A program to run before a user session starts. You should invoke sessreg
# there and optionally change the ownership of the console, etc.
# Default is ""
Startup=/etc/kde3/kdm/Xstartup
# A program to run after a user session exits. You should invoke sessreg
# there and optionally change the ownership of the console, etc.
# Default is ""
Reset=/etc/kde3/kdm/Xreset
# The program which is run as the user which logs in. It is supposed to
# interpret the session argument (see SessionTypes) and start an appropriate
# session according to it.
# Default is /usr/X11R6/bin/xterm -ls -T
Session=/usr/X11R6/lib/X11/xdm/Xsession
# The program to run if Session fails.
# Default is /usr/X11R6/bin/xterm
#FailsafeClient=
# The PATH for the Session program. Default is
# /bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin
UserPath=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games
# The PATH for Setup, Startup and Reset, etc. Default is
# /sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin
SystemPath=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games
# The default system shell. Default is /bin/sh
#SystemShell=/bin/bash
# Where to put the user's X-server authorization file if ~/.Xauthority
# cannot be created. Default is /tmp
#UserAuthDir=
# The host chooser program to use.
# Default is /usr/bin/chooser
# XXX this is going to be integrated into the greeter (probably).
#Chooser=
# If "true", KDM will automatically restart a session after an X-server
# crash (or if it is killed by Alt-Ctrl-BackSpace). Note, that enabling
# this opens a security hole: a secured display lock can be circumvented.
# Default is false
#AutoReLogin=true
# Allow root logins? Default is true
AllowRootLogin=false
# Allow to log in, when user has set an empty password? Default is true
AllowNullPasswd=false
# Who is allowed to shut down the system. This applies both to the
# greeter and to the command FiFo. Default is All
# "None" - no "Shutdown..." button is shown at all
# "Root" - the root password must be entered to shut down
# "All" - everybody can shut down the machine (Default)
AllowShutdown=Root
# Who is allowed to abort all still running sessions when shutting down.
# Same options as for AllowShutdown. Default is All
#AllowSdForceNow=Root
# The default choice for the shutdown condition/timing.
# "Schedule" - shutdown after all sessions exit (possibly at once) (Default)
# "TryNow" - shutdown, if no sessions are open, otherwise do nothing
# "ForceNow" - shutdown unconditionally
#DefaultSdMode=ForceNow
# If this is false the user must select the shutdown condition/timing already
# in the shutdown dialog. If this is true he won't be bothered with the options,
# but will be asked what to do if sessions are actually open. Default is true
# NOTE: the interaction is currently not implemented. If this is set to true,
# a normal forced shutdown will happen (without caring for the AllowSdForceNow
# option!), i.e., KDM will behave exactly as before KDE 3.0.
#InteractiveSd=false
# Where (relatively to the user's home directory) to store the last
# selected session. Default is .wmrc
#SessSaveFile=
# Greeter config for all displays
[X-*-Greeter]
# Session types the users can select. It is advisable to have "default" and
# "failsafe" listed herein, which is also the default.
# Note, that the meaning of this value is entirely up to your Session program.
SessionTypes=kde3,default,twm,sawfish,wmaker,metacity,ratpoison,gnome-session,failsafe
# Widget Style of the greeter:
# Default, Windows, Platinum, Motif, MotifPlus, CDE, SGI, and any styles you
# may have installed, e.g., HighColor; Default is "Default"
#GUIStyle=Windows
# What should be shown righthand of the input lines:
# "Logo" - the image specified by LogoPixmap (Default)
# "Clock" - a neat analog clock
# "None" - nothing
LogoArea=Clock
# The image to show when LogoArea=Logo. Default is kdelogo.png
#LogoPixmap=
# Normally, the greeter is centered on the screen. Use this, if you want
# it to appear elsewhere on the screen. Default is false
#GreeterPosFixed=true
#GreeterPosX=200
#GreeterPosY=100
# The headline in the greeter.
# The following character pairs are replaced:
# - %d -> current display
# - %h -> host name, possibly with domain name
# - %n -> node name, most probably the host name without domain name
# - %s -> the operating system
# - %r -> the operating system's version
# - %m -> the machine (hardware) type
# - %% -> a single %
# Default is "Welcome to %s at %n"
#GreetString=K Desktop Environment (%n)
# The font for the headline. Default is charter,24,bold
#GreetFont=charter,24,5,0,50,0
# The normal font used in the greeter. Default is helvetica,12
#StdFont=helvetica,12,5,0,50,0
# The font used for the "Login Failed" message. Default is helvetica,12,bold
#FailFont=helvetica,12,5,0,75,0
# Whether the fonts shown in the greeter should be antialiased. Default is false
AntiAliasing=true
# What to do with the Num Lock modifier for the time the greeter is running:
# "On" -> - turn on
# "Off" -> - turn off
# "Keep" -> - don't change the state (Default)
#NumLock=Off
# Language to use in the greeter. Default is en_US
#Language=de_DE
# Specify, which user names (along with pictures) should be shown in the
# greeter.
# "NotHidden" - all users except those listed in HiddenUsers (Default)
# "Selected" - only the users listed in SelectedUsers
# "None" - no user list will be shown at all
#ShowUsers=None
# For ShowUsers=Selected. Default is ""
#SelectedUsers=root,johndoe
# For ShowUsers=NotHidden. Default is ""
HiddenUsers=adm,alias,amanda,apache,bin,bind,daemon,exim,falken,ftp,games,gdm,gopher,halt,httpd,ident,imnadm,ingres,kmem,lp,mail,mailnull,man,mta,mysql,named,news,nfsnobody,nobody,nscd,ntp,operator,pcap,pop,postfix,postgres,qmaild,qmaill,qmailp,qmailq,qmailr,qmails,radvd,reboot,rpc,rpcuser,rpm,sendmail,shutdown,squid,sympa,sync,tty,uucp,xfs,xten
# Special case of HiddenUsers: users with a UID less than this number
# (except root) will not be shown as well. Default is 0
MinShowUID=1000
# Complement to MinShowUID: users with a UID greater than this number will
# not be shown as well. Default is 65535
MaxShowUID=29999
# If false, the users are listed in the order they appear in /etc/passwd.
# If true, they are sorted alphabetically. Default is true
#SortUsers=false
# Specify, if/which user should be preselected for log in.
# Note, that enabling this feature can be considered a security hole,
# as it presents a valid login name to a potential attacker, so he "only"
# needs to guess the password.
# "None" - don't preselect any user (Default)
# "Previous" - the user which successfully logged in last time
# "Default" - the user specified in the DefaultUser field
#PreselectUser=Previous
# The user to preselect if PreselectUser=Default
#DefaultUser=ethel
# If this is true, the password input line is focused automatically if
# a user is preselected. Default is false
#FocusPasswd=true
# The password input fields cloak the typed in text. Specify, how to do it:
# "NoEcho" - nothing is shown at all, the cursor doesn't move
# "OneStar" - "*" is shown for every typed letter (Default)
# "ThreeStars" - "***" is shown for every typed letter
#EchoMode=NoEcho
# Hold the X-server grabbed the whole time the greeter is visible.
# This may be more secure, but will disable any background. Default is false
#GrabServer=true
# How many seconds to wait for grab to succeed. Default is 3
#GrabTimeout=
# Warn, if local X-authorization cannot be created. Default is true
# XXX this is a dummy currently
AuthComplain=true
# Core config for local displays
[X-:*-Core]
# How often to try to run the X-server. Running includes executing it and
# waiting for it to come up. Default is 1
#ServerAttempts=
# How long to wait for a local X-server to come up. Default is 15
#ServerTimeout=
# See above
AllowShutdown=All
# See above
AllowRootLogin=true
# See above
AllowNullPasswd=true
# Enable password-less logins on this display. USE WITH EXTREME CARE!
# Default is false
#NoPassEnable=true
# The users that don't need to provide a password to log in. NEVER list root!
#NoPassUsers=fred,ethel
# Greeter config for local displays
[X-:*-Greeter]
# See above
#AuthComplain=false
# The screen the greeter should be displayed on in multi-headed setups.
# The numbering starts with 0 and corresponds to the listing order in the
# active ServerLayout section of XF86Config. -1 means to use the upper-left
# screen. Default is 0
#GreeterScreen=-1
# Core config for 1st local display
[X-:0-Core]
# Enable automatic login on this display. USE WITH EXTREME CARE!
# Default is false
#AutoLoginEnable=true
# The user to log in automatically. NEVER specify root!
#AutoLoginUser=fred
# The password for the user to log in automatically. This is NOT required
# unless the user is to be logged into a NIS or Kerberos domain. If you use
# it, you must "chmod 600 kdmrc" for obvious reasons.
#AutoLoginPass=secret!
# The session for the user to log in automatically. This becomes useless after
# the user's first login, as the last used session will take precedence.
#AutoLoginSession=kde
# If "true", the auto-login is truly automatic, i.e., the user is logged in
# when KDM comes up. If "false", the auto-login must be initiated by crashing
# the X-server with Alt-Ctrl-BackSpace. Default is true
#AutoLogin1st=false
# See above
Authorize=true
# See above
Setup=/etc/kde3/kdm/Xsetup_0
# See above
Startup=/etc/kde3/kdm/GiveConsole
# See above
Reset=/etc/kde3/kdm/TakeConsole
# Greeter config for 1st local display
[X-:0-Greeter]
# See above
#PreselectUser=Default
# See above
#DefaultUser=johndoe
[X-:1-Core]
# See above
Authorize=true
Reply to: