Re: Problema usb
Allora sembra che i problemi si verificano quando avvio un browser web.
Prima di questo tutto funziona: il mouse e il mount della chiavetta.
Dopo ne mouse ne chiavetta.
questo è lsusb:
~$ lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 1241:1166 Belkin
Bus 001 Device 001: ID 0000:0000
Questo è: /var/log/syslog:
...
Jul 23 16:05:12 localhost avahi-daemon[2421]: Registering HINFO record
with values 'I686'/'LINUX'.
Jul 23 16:05:13 localhost /usr/sbin/cron[2465]: (CRON) INFO (pidfile fd = 3)
Jul 23 16:05:13 localhost /usr/sbin/cron[2466]: (CRON) STARTUP (fork ok)
Jul 23 16:05:13 localhost /usr/sbin/cron[2466]: (CRON) INFO (Running
@reboot jobs)
Jul 23 16:05:13 localhost avahi-daemon[2421]: Server startup complete.
Host name is belatron.local. Local service cookie is 553745132.
Jul 23 16:06:40 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 3
Jul 23 16:06:40 localhost kernel: usb 3-2: configuration #1 chosen from
1 choice
Jul 23 16:06:40 localhost kernel: Initializing USB Mass Storage driver...
Jul 23 16:06:40 localhost kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Jul 23 16:06:40 localhost kernel: usbcore: registered new driver usb-storage
Jul 23 16:06:40 localhost kernel: USB Mass Storage support registered.
Jul 23 16:06:40 localhost kernel: usb-storage: device found at 3
Jul 23 16:06:40 localhost kernel: usb-storage: waiting for device to
settle before scanning
Jul 23 16:06:45 localhost kernel: Vendor: Generic Model: USB Flash
Disk Rev: 2.00
Jul 23 16:06:45 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jul 23 16:06:45 localhost kernel: usb-storage: device scan complete
Jul 23 16:06:46 localhost kernel: ready
Jul 23 16:06:46 localhost kernel: SCSI device sda: 1017344 512-byte hdwr
sectors (521 MB)
Jul 23 16:06:46 localhost kernel: sda: Write Protect is off
Jul 23 16:06:46 localhost kernel: sda: Mode Sense: 03 00 00 00
Jul 23 16:06:46 localhost kernel: sda: assuming drive cache: write through
Jul 23 16:06:46 localhost kernel: SCSI device sda: 1017344 512-byte hdwr
sectors (521 MB)
Jul 23 16:06:46 localhost kernel: sda: Write Protect is off
Jul 23 16:06:46 localhost kernel: sda: Mode Sense: 03 00 00 00
Jul 23 16:06:46 localhost kernel: sda: assuming drive cache: write through
Jul 23 16:06:46 localhost kernel: sda: sda1
Jul 23 16:06:46 localhost kernel: sd 0:0:0:0: Attached scsi removable
disk sda
Jul 23 16:07:07 localhost hald: mounted /dev/sda1 on behalf of uid 1000
Jul 23 16:07:42 localhost kernel: psmouse.c: GlidePoint at
isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
Jul 23 16:07:42 localhost kernel: psmouse.c: resync failed, issuing
reconnect request
Jul 23 16:17:02 localhost /USR/SBIN/CRON[2809]: (root) CMD ( cd / &&
run-parts --report /etc/cron.hourly)
Jul 23 16:27:47 localhost kernel: NET: Registered protocol family 10
Jul 23 16:27:47 localhost kernel: lo: Disabled Privacy Extensions
Jul 23 16:27:47 localhost kernel: IPv6 over IPv4 tunneling driver
Jul 23 16:27:57 localhost kernel: eth0: no IPv6 routers present
Jul 23 16:28:45 localhost kernel: usb 3-2: reset high speed USB device
using ehci_hcd and address 3
Jul 23 16:28:57 localhost kernel: usb 3-2: device not accepting address
3, error -110
Jul 23 16:28:57 localhost kernel: usb 3-2: reset high speed USB device
using ehci_hcd and address 3
Jul 23 16:29:08 localhost kernel: usb 3-2: device not accepting address
3, error -110
Jul 23 16:29:08 localhost kernel: usb 3-2: reset high speed USB device
using ehci_hcd and address 3
Jul 23 16:29:19 localhost kernel: usb 3-2: device not accepting address
3, error -110
Jul 23 16:29:19 localhost kernel: usb 3-2: reset high speed USB device
using ehci_hcd and address 3
Jul 23 16:29:29 localhost kernel: usb 3-2: device not accepting address
3, error -110
Jul 23 16:29:29 localhost kernel: sd 0:0:0:0: scsi: Device offlined -
not ready after error recovery
Jul 23 16:29:30 localhost kernel: usb 3-2: USB disconnect, address 3
Jul 23 16:29:30 localhost hald[2373]: forcibly attempting to lazy
unmount /dev/sda1 as enclosing drive was disconnected
Jul 23 16:29:30 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 4
Jul 23 16:29:30 localhost hald: unmounted /dev/sda1 from '/media/disk'
on behalf of uid 0
Jul 23 16:29:41 localhost kernel: usb 3-2: device not accepting address
4, error -110
Jul 23 16:29:41 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 5
Jul 23 16:29:53 localhost kernel: usb 3-2: device not accepting address
5, error -110
Jul 23 16:29:53 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 6
Jul 23 16:30:04 localhost kernel: usb 3-2: device not accepting address
6, error -110
Jul 23 16:30:04 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 7
Jul 23 16:30:14 localhost kernel: usb 3-2: device not accepting address
7, error -110
Jul 23 16:45:08 localhost -- MARK --
Jul 23 16:49:31 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 8
Jul 23 16:49:42 localhost kernel: usb 3-2: device not accepting address
8, error -110
Jul 23 16:49:42 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 9
Jul 23 16:49:54 localhost kernel: usb 3-2: device not accepting address
9, error -110
Jul 23 16:49:54 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 10
Jul 23 16:50:04 localhost kernel: usb 3-2: device not accepting address
10, error -110
Jul 23 16:50:04 localhost kernel: usb 3-2: new high speed USB device
using ehci_hcd and address 11
Jul 23 16:50:15 localhost kernel: usb 3-2: device not accepting address
11, error -110
Questo /var/log/Xorg.0.log:
...
(**) Option "XkbLayout" "it"
(**) Generic Keyboard: XkbLayout: "it"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(**) Option "SHMConfig" "on"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type:
KEYBOARD)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+it" };
xkb_geometry { include "pc(pc105)" };
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event4
(**) Option "Device" "/dev/input/event4"
(--) Synaptics Touchpad touchpad found
(**) RADEON(0): RADEONSaveScreen(2)
AUDIT: Mon Jul 23 16:39:30 2007: 2488 X: client 21 rejected from local host
Questo è ~/.xsession-errors:
Xsession: X session started for enrico at lun lug 23 16:05:37 CEST 2007
startkde: Starting up...
kbuildsycoca running...
QFont::setPointSize: Point size <= 0 (-3)
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x1e00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x2a00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0xc00062
Launched ok, pid = 2732
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x800403
kio (KIOConnection): ERROR: Could not write data
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x3000004
DCOP aborting while waiting for answer from 'konqueror-2781'
DCOPServer::DCOPReply for unknown connection.
kio (KIOConnection): ERROR: Could not write data
QApplication::postEvent: Unexpected null receiver
konsole: WARNING: Unable to use /usr/share/apps/konsole/mc.desktop
konsole: WARNING: Unable to use /usr/share/apps/konsole/sumc.desktop
konsole: WARNING: Unable to use /usr/share/apps/konsole/screen.desktop
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x2e00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1e00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1e00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1e00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x1e00005
KFileMetaInfo: WARNING: KTxtPlugin was created for text/x-log but
doesn't call addMimeTypeInfo for it!
kio (KIOConnection): ERROR: Could not write data
KFileMetaInfo: WARNING: KTxtPlugin was created for text/x-log but
doesn't call addMimeTypeInfo for it!
kio (KIOConnection): ERROR: Could not write data
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1a00c26
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1a00c26
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1a00c26
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1a00c26
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1a00c26
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x2a00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x2a000a8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x2a000a8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x2a000a8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x2a000a8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x2a000a8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x2a00005
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x30001e1
kio (KIOConnection): ERROR: Header read failed, errno=104
kio (KIOConnection): ERROR: Header has invalid size (-1)
kio (KIOConnection): ERROR: Header read failed, errno=104
kio (KIOConnection): ERROR: Header has invalid size (-1)
kio (KLauncher): ERROR: SlavePool: No communication with slave.
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 20
Minor opcode: 0
Resource id: 0x1a00005
DOUBLE-CLICK: 250 --> -1 THRESHOLD: 8 --> -1 Hash Manager Error : 1
Error - could not open affix description file
/usr/lib/icedove/components/myspell/it.aff
Failure loading aff file /usr/lib/icedove/components/myspell/it.aff
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 19
Minor opcode: 0
Resource id: 0x1a00261
konsole: WARNING: Unable to use /usr/share/apps/konsole/mc.desktop
konsole: WARNING: Unable to use /usr/share/apps/konsole/sumc.desktop
konsole: WARNING: Unable to use /usr/share/apps/konsole/screen.desktop
Davide Prina ha scritto:
Enrico wrote:
Ho installato kde ma ora non riesco più a fare il mount della chiavetta
che errori hai?
cosa dice
$ lsusb
$ tail /var/log/syslog
dopo che hai inserito la chiavetta?
Ho problemi pure con il mouse usb: dopo qualche minuto dall'avvio si
blocca e non funzoiona più.
idem
Da dove devo cominciare a guardare? Quali sono i pacchetti che
dai log
guarda se trovi errori in:
/var/log/syslog
/var/log/Xorg.0.log
~/.xsession-errors
gestiscono le periferiche usb con kde? E' possibile fare il mount
automatico?
sì, ma prima individua dove sta il problema
Ciao
Davide
Reply to: