Re: wi-fi va e non va era [modulo ipw2200 che si carica a "giorni alterni"]
Un saluto a tutta la lista.
Scusate se invado di nuovo la lista ma ho il "mal di testa" a forza di
"sbattere" su questo problema.
Allora:
Ho una Debian/Etch con kernel 2.6.18-3-i686
Al momento dell'istallazione il wi-fi non funzionava. Ho installato il
modulo preso dal reposity "contrib".
Ho scaricato il "firmware 3.0" dal sito.
Ho seguito alla lettera le idicazioni dell'amico su,
http://www.redstarlabs.org/2006/11/21/intel-pro-wireless-ipw2200-su-debian-unstable/
ma il wi-fi funziona a "giorni alterni".
Ho provato a postare su "google" la sequenza dell'errore, come avevo
gia' fatto in precedenza ma niente :-(
Io mi sto studiando i vari "dmesg" e li confronto con il comando "diff"
ma non ne vengo a capo.
Ho notato che funziona, non sempre ma il piu' delle volte, quando e
"spento" l'interuttore posto a lato del portatile e, naturalmente, non
riesce a fare nessuna connessione, "accendo" l'interuttore ma niente.
Una sola volta, di quelle buone, accendendo l'interuttore e' partita la
ricerca automatica. Per il resto e' "lotto" :-)
Sapessi almeno dove guardare :-)
Nelle ricerche sono finito anche in Giappone dove la lingua mi
totalmente ostica :-)
Beh! per chi volesse metto in allegato i "dmesg" di quando funziona e no
per non intasare gia' questa lunga lettera.
Ciao Genki ):o))
----------------------------------------------
This message has been scanned for viruses and
dangerous content by Jambo MailScanner, and is
believed to be clean.
---------------------------------------------
"easy access to the world"
Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable)
BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data)
BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131039
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126943 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 TOSINV ) @ 0x000e5010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1fff89f7
ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x1ffffb30
ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1ffffbc0
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1fff8be5
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1fff8a2b
ACPI: DSDT (v001 TOSINV SONOMA 0x00001004 INTL 0x02002036) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
Detected 1862.182 MHz processor.
Built 1 zonelists. Total pages: 131039
Kernel command line: root=/dev/sda3 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0140a000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512056k/524156k available (1543k kernel code, 11560k reserved, 574k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3727.82 BogoMIPS (lpj=7455651)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4385k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: Power Resource [PUT2] (on)
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:06:06.0
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: c0000000-cfffffff
PREFETCH window: 90000000-9fffffff
PCI: Bridge: 0000:00:1c.0
IO window: a000-bfff
MEM window: bc000000-bfffffff
PREFETCH window: 8c000000-8fffffff
PCI: Bridge: 0000:00:1c.1
IO window: 8000-9fff
MEM window: b8000000-bbffffff
PREFETCH window: 88000000-8bffffff
PCI: Bus 7, cardbus bridge: 0000:06:06.0
IO window: 00006000-000060ff
IO window: 00006400-000064ff
PREFETCH window: 80000000-81ffffff
MEM window: b2000000-b3ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-7fff
MEM window: b0000000-b7ffffff
PREFETCH window: 80000000-87ffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1168641809.764:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [TZCR] (50 C)
ACPI: Thermal Zone [TZVR] (50 C)
ACPI: Thermal Zone [TZVL] (50 C)
ACPI: Thermal Zone [TZCL] (41 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
Vendor: ATA Model: FUJITSU MHV2080A Rev: 0040
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
Vendor: MATSHITA Model: DVD-RAM UJ-831S Rev: 1.40
Type: CD-ROM ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[6] MMIO=[b0000000-b00007ff] Max Packet=[2048] IR/IT contexts=[4/8]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
sd 0:0:0:0: Attached scsi disk sda
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c014037f>] __report_bad_irq+0x2b/0x69
[<c014056c>] note_interrupt+0x1af/0x1e7
[<e086349e>] usb_hcd_irq+0x23/0x50 [usbcore]
[<c013fb83>] handle_IRQ_event+0x23/0x49
[<c013fc5c>] __do_IRQ+0xb3/0xe8
[<c01050e5>] do_IRQ+0x43/0x52
[<c01036b6>] common_interrupt+0x1a/0x20
[<c013fb77>] handle_IRQ_event+0x17/0x49
[<c013fc3c>] __do_IRQ+0x93/0xe8
[<c01050e5>] do_IRQ+0x43/0x52
[<c01036b6>] common_interrupt+0x1a/0x20
[<c02810a0>] _spin_unlock_irqrestore+0x8/0x9
[<e08897db>] ohci_devctl+0x5a/0x55a [ohci1394]
[<e08e2ff9>] csr1212_generate_csr_image+0x309/0x35c [ieee1394]
[<e08db01c>] hpsb_reset_bus+0x1c/0x22 [ieee1394]
[<c012ac30>] run_workqueue+0x78/0xb5
[<e08dcbfd>] delayed_reset_bus+0x0/0xc9 [ieee1394]
[<c012b51a>] worker_thread+0xd9/0x10b
[<c0117778>] default_wake_function+0x0/0xc
[<c012b441>] worker_thread+0x0/0x10b
[<c012d893>] kthread+0xc2/0xef
[<c012d7d1>] kthread+0x0/0xef
[<c0101005>] kernel_thread_helper+0x5/0xb
handlers:
[<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore])
[<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore])
[<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore])
Disabling IRQ #11
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1221d56]
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.5 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1
sky2 eth1: addr 00:a0:d1:22:1d:56
Linux agpgart interface v0.101 (c) Dave Jones
sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode.
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
intel_rng: FWH not detected
Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66
input: PC Speaker as /class/input/input1
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
Yenta TI: socket 0000:06:06.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:06:06.0 falling back to parallel PCI interrupts
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
Real Time Clock Driver v1.12ac
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Yenta TI: socket 0000:06:06.0 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
irda_init()
NET: Registered protocol family 23
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Yenta: ISA IRQ mask 0x0018, PCI irq 0
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
cs: IO port probe 0x6000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI at 0xb000a000 irq 11 DMA
mmc1: SDHCI at 0xb000a100 irq 11 DMA
mmc2: SDHCI at 0xb000a200 irq 11 DMA
slamr: probe 8086:266d ICH4 card...
PCI: Enabling device 0000:00:1e.3 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1e.3 to 64
slamr: mc97 codec is SIL27
slamr: slamr0 is ICH4 card.
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0mq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f 0x300-0x307 0x310-0x31f 0x370-0x37f
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ts: Compaq touchscreen protocol output
ipw2200: Failed to send TX_POWER: Command timed out.
ipw2200: Failed to send TX_POWER: Command timed out.
ipw2200: Failed to send TX_POWER: Command timed out.
ipw2200: Failed to send TX_POWER: Command timed out.
ipw2200: Failed to send TX_POWER: Command timed out.
ipw2200: Unable to initialize device after 5 attempts.
ipw2200: failed to register network device
ACPI: PCI interrupt for device 0000:06:04.0 disabled
ipw2200: probe of 0000:06:04.0 failed with error -5
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 55483 usecs
intel8x0: clocking to 48000
Adding 867468k swap on /dev/sda8. Priority:-1 extents:1 across:867468k
EXT3 FS on sda3, internal journal
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
sky2 eth0: enabling interface
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [AC] (off-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.25.0 20060524 on minor 0
powernow: This module only works with AMD K7 CPUs
acpi-cpufreq: CPU0 - ACPI performance management activated.
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech Optical USB Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable)
BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data)
BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131039
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126943 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 TOSINV ) @ 0x000e5010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1fff89f7
ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x1ffffb30
ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1ffffbc0
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1fff8be5
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1fff8a2b
ACPI: DSDT (v001 TOSINV SONOMA 0x00001004 INTL 0x02002036) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
Detected 1862.050 MHz processor.
Built 1 zonelists. Total pages: 131039
Kernel command line: root=/dev/sda3 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0140a000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512056k/524156k available (1543k kernel code, 11560k reserved, 574k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3727.82 BogoMIPS (lpj=7455655)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9ff 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4385k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: Power Resource [PUT2] (on)
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:06:06.0
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: c0000000-cfffffff
PREFETCH window: 90000000-9fffffff
PCI: Bridge: 0000:00:1c.0
IO window: a000-bfff
MEM window: bc000000-bfffffff
PREFETCH window: 8c000000-8fffffff
PCI: Bridge: 0000:00:1c.1
IO window: 8000-9fff
MEM window: b8000000-bbffffff
PREFETCH window: 88000000-8bffffff
PCI: Bus 7, cardbus bridge: 0000:06:06.0
IO window: 00006000-000060ff
IO window: 00006400-000064ff
PREFETCH window: 80000000-81ffffff
MEM window: b2000000-b3ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-7fff
MEM window: b0000000-b7ffffff
PREFETCH window: 80000000-87ffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1168641138.760:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [TZCR] (56 C)
ACPI: Thermal Zone [TZVR] (37 C)
ACPI: Thermal Zone [TZVL] (38 C)
ACPI: Thermal Zone [TZCL] (38 C)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
Vendor: ATA Model: FUJITSU MHV2080A Rev: 0040
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
Vendor: MATSHITA Model: DVD-RAM UJ-831S Rev: 1.40
Type: CD-ROM ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[6] MMIO=[b0000000-b00007ff] Max Packet=[2048] IR/IT contexts=[4/8]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
sd 0:0:0:0: Attached scsi disk sda
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c014037f>] __report_bad_irq+0x2b/0x69
[<c014056c>] note_interrupt+0x1af/0x1e7
[<e086349e>] usb_hcd_irq+0x23/0x50 [usbcore]
[<c013fb83>] handle_IRQ_event+0x23/0x49
[<c013fc5c>] __do_IRQ+0xb3/0xe8
[<c01050e5>] do_IRQ+0x43/0x52
[<c01036b6>] common_interrupt+0x1a/0x20
[<c013fb77>] handle_IRQ_event+0x17/0x49
[<c013fc3c>] __do_IRQ+0x93/0xe8
[<c01050e5>] do_IRQ+0x43/0x52
[<c01036b6>] common_interrupt+0x1a/0x20
[<c02810a0>] _spin_unlock_irqrestore+0x8/0x9
[<e08897db>] ohci_devctl+0x5a/0x55a [ohci1394]
[<e08e2ff9>] csr1212_generate_csr_image+0x309/0x35c [ieee1394]
[<e08db01c>] hpsb_reset_bus+0x1c/0x22 [ieee1394]
[<c012ac30>] run_workqueue+0x78/0xb5
[<e08dcbfd>] delayed_reset_bus+0x0/0xc9 [ieee1394]
[<c012b51a>] worker_thread+0xd9/0x10b
[<c0117778>] default_wake_function+0x0/0xc
[<c012b441>] worker_thread+0x0/0x10b
[<c012d893>] kthread+0xc2/0xef
[<c012d7d1>] kthread+0x0/0xef
[<c0101005>] kernel_thread_helper+0x5/0xb
handlers:
[<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore])
[<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore])
[<e086347b>] (usb_hcd_irq+0x0/0x50 [usbcore])
Disabling IRQ #11
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1221d56]
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.5 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1
sky2 eth1: addr 00:a0:d1:22:1d:56
sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx mode.
intel_rng: FWH not detected
input: PC Speaker as /class/input/input1
Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
Real Time Clock Driver v1.12ac
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Yenta TI: socket 0000:06:06.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:06:06.0 falling back to parallel PCI interrupts
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0mq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
irda_init()
NET: Registered protocol family 23
Yenta TI: socket 0000:06:06.0 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x0018, PCI irq 0
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
cs: IO port probe 0x6000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI at 0xb000a000 irq 11 DMA
mmc1: SDHCI at 0xb000a100 irq 11 DMA
mmc2: SDHCI at 0xb000a200 irq 11 DMA
slamr: probe 8086:266d ICH4 card...
PCI: Enabling device 0000:00:1e.3 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1e.3 to 64
slamr: mc97 codec is SIL27
slamr: slamr0 is ICH4 card.
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1e.2 to 64
cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f 0x300-0x307 0x310-0x31f 0x370-0x37f
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ts: Compaq touchscreen protocol output
intel8x0_measure_ac97_clock: measured 55461 usecs
intel8x0: clocking to 48000
Adding 867468k swap on /dev/sda8. Priority:-1 extents:1 across:867468k
EXT3 FS on sda3, internal journal
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
sky2 eth0: enabling interface
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [AC] (off-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth2: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.25.0 20060524 on minor 0
powernow: This module only works with AMD K7 CPUs
acpi-cpufreq: CPU0 - ACPI performance management activated.
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
eth2: no IPv6 routers present
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech Optical USB Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Reply to: