Intersil Corporation Intersil ISL3890
Evito di inserire "kubuntu" nel soggetto anche se è questo il sistema su cui
vorrei far funzionare questa scheda Wi-fi PCI, vi prego ragazzi, sò che
questa è Debian Italian List, non ditemi di sottoporre il quesito su una
lista dedicata a ubuntu, ne ho un installazione su disco esterno che
praticamente non uso e non ho voglia di iscrivermi a una lista che
praticamente non frequenterei. Tutto è nato da un mio desiderio di provare a
far girare Linux su una macchina X86_64 (preconfigurato HP mediacenter...non
mio!!!)...
La scheda in questione è una:
lspci --vv
0000:02:01.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism
GT/Prism Duette] (rev 01)
Subsystem: Accton Technology Corporation WN4201B
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 7000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fddfc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Ho dato un occhiata al progetto prism64 e del resto non ho dovuto fare molto
visto che i driver sono gia inclusi in linux, stessa cosa per il firmware.
Evidenzio qui sotto l'errore che credo causi il mancato funzionamento di
questo accrocco radio, perdonate la confusione nel log data dal PRINTK_TIME,
ho dimenticato di disabilitarlo nel configurare il tutto, tra l altro non
sono ancora riuscito a configurare nulla realmente, c'è troppo hardware per
me nuovo che non riesco a gestire, ho fatto un paio di conf ma il pc manco si
avviava, ho usato la conf ufficiale di un 2.6.15 che si trova in /boot.
PS. provato linux 2.6.15/2.6.17 - nada
scusate il disturbo :/
=============================================================
[ 76.291618] eth1: firmware version: 1.0.4.3
[ 76.291663] eth1: firmware upload complete
[ 76.295347] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer
dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1053
[ 76.295414] usbcore: registered new driver usblp
[ 76.295463] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class
driver
[ 77.410940] eth1: resetting device...
[ 77.410960] eth1: uploading firmware...
[ 77.492190] eth1: firmware version: 1.0.4.3
[ 77.492240] eth1: firmware upload complete
[ 78.038354] parport0: PC-style at 0x378 [PCSPP,EPP]
[ 78.141912] lp0: using parport0 (polling).
[ 78.190761] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 78.190834] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 78.390533] Adding 2168732k swap on /dev/sdb6. Priority:-1 extents:1
across:2168732k
[ 78.490254] eth1: no 'reset complete' IRQ seen - retrying
[ 78.661991] EXT3 FS on sdb5, internal journal
[ 79.136924] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 79.136979] md: bitmap version 4.39
[ 79.488463] eth1: no 'reset complete' IRQ seen - retrying
[ 79.488519] eth1: interface reset failure
[ 79.488567] prism54: Your card/socket may be faulty, or IRQ line too busy :
(================================================================
--
Felipe
[ 0.000000] Bootdata ok (command line is root=/dev/sdb5 ro noapic acpi=off)
[ 0.000000] Linux version 2.6.17.6-ubuntu1 (root@felipesb-desktop) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sun Aug 13 21:36:51 CEST 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
[ 0.000000] BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001fef0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001fef0000
[ 0.000000] On node 0 totalpages: 127728
[ 0.000000] DMA zone: 2756 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 124972 pages, LIFO batch:31
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 6:8 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1ff00000:c0100000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 8440000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/sdb5 ro noapic acpi=off
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
[ 0.000000] time.c: Detected 2188.816 MHz processor.
[ 57.734683] Console: colour VGA+ 80x25
[ 57.736779] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 57.737131] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 57.743463] Memory: 503472k/523200k available (2123k kernel code, 19340k reserved, 788k data, 188k init)
[ 57.823393] Calibrating delay using timer specific routine.. 4386.22 BogoMIPS (lpj=8772440)
[ 57.823538] Security Framework v1.0.0 initialized
[ 57.823590] SELinux: Disabled at boot.
[ 57.823655] Mount-cache hash table entries: 256
[ 57.823824] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 57.823871] CPU: L2 Cache: 512K (64 bytes/line)
[ 57.823918] CPU 0/0(1) -> Node 0 -> Core 0
[ 57.823977] SMP alternatives: switching to UP code
[ 57.824153] Freeing SMP alternatives: 20k freed
[ 57.824326] checking if image is initramfs... it is
[ 58.302964] Freeing initrd memory: 6574k freed
[ 58.308198] Using local APIC timer interrupts.
[ 58.353852] result 12436476
[ 58.353898] Detected 12.436 MHz APIC timer.
[ 58.354545] Brought up 1 CPUs
[ 58.354596] testing NMI watchdog ... OK.
[ 58.394727] migration_cost=0
[ 58.395090] NET: Registered protocol family 16
[ 58.395163] PCI: Using configuration type 1
[ 58.395368] ACPI: Subsystem revision 20060127
[ 58.395413] ACPI: Interpreter disabled.
[ 58.395461] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 58.395513] pnp: PnP ACPI: disabled
[ 58.395585] PCI: Probing PCI hardware
[ 58.395631] PCI: Probing PCI hardware (bus 00)
[ 58.396277] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[ 58.396529] Boot video device is 0000:01:00.0
[ 58.397187] PCI: Transparent bridge - 0000:00:14.4
[ 58.398206] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[ 58.398356] PCI-DMA: Disabling IOMMU.
[ 58.398614] PCI: Bridge: 0000:00:02.0
[ 58.398661] IO window: e000-efff
[ 58.398708] MEM window: fde00000-fdefffff
[ 58.398754] PREFETCH window: d0000000-dfffffff
[ 58.398802] PCI: Bridge: 0000:00:14.4
[ 58.398849] IO window: d000-dfff
[ 58.398899] MEM window: fdd00000-fddfffff
[ 58.398948] PREFETCH window: f8000000-fbffffff
[ 58.399004] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 58.399041] NET: Registered protocol family 2
[ 58.426413] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 58.426581] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 58.426851] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 58.427004] TCP: Hash tables configured (established 16384 bind 8192)
[ 58.427051] TCP reno registered
[ 58.427349] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 58.427698] audit: initializing netlink socket (disabled)
[ 58.427753] audit(1155509292.696:1): initialized
[ 58.427927] VFS: Disk quotas dquot_6.5.1
[ 58.427987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 58.428092] Initializing Cryptographic API
[ 58.428139] io scheduler noop registered
[ 58.428230] io scheduler anticipatory registered (default)
[ 58.428362] io scheduler deadline registered
[ 58.428459] io scheduler cfq registered
[ 58.429028] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 58.429033] pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
[ 58.429101] assign_interrupt_mode Found MSI capability
[ 58.429185] Allocate Port Service[0000:00:02.0:pcie00]
[ 58.447669] Real Time Clock Driver v1.12ac
[ 58.447766] Linux agpgart interface v0.101 (c) Dave Jones
[ 58.447813] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 58.448247] mice: PS/2 mouse device common for all mice
[ 58.448356] isa bounce pool size: 16 pages
[ 58.448786] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 58.448922] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 58.448970] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 58.449282] PNP: No PS/2 controller found. Probing ports directly.
[ 59.000292] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 59.002097] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 59.002216] TCP bic registered
[ 59.002267] NET: Registered protocol family 1
[ 59.002316] NET: Registered protocol family 8
[ 59.002362] NET: Registered protocol family 20
[ 59.002476] Freeing unused kernel memory: 188k freed
[ 59.443048] input: AT Translated Set 2 keyboard as /class/input/input0
[ 59.464836] usbcore: registered new driver usbfs
[ 59.464917] usbcore: registered new driver hub
[ 59.465792] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 59.465965] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 59.466071] ehci_hcd 0000:00:13.2: irq 11, io mem 0xfe02b000
[ 59.466128] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 59.466673] spurious 8259A interrupt: IRQ7.
[ 59.466872] usb usb1: configuration #1 chosen from 1 choice
[ 59.466951] hub 1-0:1.0: USB hub found
[ 59.467001] hub 1-0:1.0: 8 ports detected
[ 59.575154] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 59.575304] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 59.575459] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 59.604246] ohci_hcd 0000:00:13.0: irq 11, io mem 0xfe02d000
[ 59.668206] usb usb2: configuration #1 chosen from 1 choice
[ 59.668286] hub 2-0:1.0: USB hub found
[ 59.668341] hub 2-0:1.0: 4 ports detected
[ 59.776064] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 59.776221] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 59.807871] ohci_hcd 0000:00:13.1: irq 11, io mem 0xfe02c000
[ 59.811856] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 59.867846] usb usb3: configuration #1 chosen from 1 choice
[ 59.867924] hub 3-0:1.0: USB hub found
[ 59.867978] hub 3-0:1.0: 4 ports detected
[ 59.952511] usb 1-1: configuration #1 chosen from 1 choice
[ 59.981592] SCSI subsystem initialized
[ 59.982788] Initializing USB Mass Storage driver...
[ 60.690320] ohci_hcd 0000:00:13.0: wakeup
[ 61.073577] usb 3-1: new full speed USB device using ohci_hcd and address 2
[ 61.274307] usb 3-1: configuration #1 chosen from 1 choice
[ 61.580665] usb 3-2: new low speed USB device using ohci_hcd and address 3
[ 61.783374] usb 3-2: configuration #1 chosen from 1 choice
[ 61.789477] scsi0 : SCSI emulation for USB Mass Storage devices
[ 61.789568] usb-storage: device found at 2
[ 61.789570] usb-storage: waiting for device to settle before scanning
[ 61.789580] usbcore: registered new driver usb-storage
[ 61.789626] USB Mass Storage support registered.
[ 62.095740] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 62.296473] usb 2-2: configuration #1 chosen from 1 choice
[ 62.602826] usb 2-4: new full speed USB device using ohci_hcd and address 3
[ 62.803549] usb 2-4: configuration #1 chosen from 1 choice
[ 62.805558] scsi1 : SCSI emulation for USB Mass Storage devices
[ 62.805676] usb-storage: device found at 3
[ 62.805678] usb-storage: waiting for device to settle before scanning
[ 62.805709] usbcore: registered new driver hiddev
[ 62.812567] input: BTC USB Multimedia Cordless Kit as /class/input/input1
[ 62.812622] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:13.1-2
[ 62.828516] input: BTC USB Multimedia Cordless Kit as /class/input/input2
[ 62.828607] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:13.1-2
[ 62.828821] usbcore: registered new driver usbhid
[ 62.828867] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 63.332233] libata version 1.20 loaded.
[ 63.333007] sata_sil 0000:00:11.0: version 0.9
[ 63.333208] ata1: SATA max UDMA/100 cmd 0xFFFFC20000014080 ctl 0xFFFFC2000001408A bmdma 0xFFFFC20000014000 irq 11
[ 63.333285] ata2: SATA max UDMA/100 cmd 0xFFFFC200000140C0 ctl 0xFFFFC200000140CA bmdma 0xFFFFC20000014008 irq 11
[ 63.537167] ata1: SATA link down (SStatus 0)
[ 63.547288] scsi2 : sata_sil
[ 63.752764] ata2: SATA link down (SStatus 0)
[ 63.762871] scsi3 : sata_sil
[ 63.763185] ata3: SATA max UDMA/100 cmd 0xFFFFC20000016080 ctl 0xFFFFC2000001608A bmdma 0xFFFFC20000016000 irq 10
[ 63.763260] ata4: SATA max UDMA/100 cmd 0xFFFFC200000160C0 ctl 0xFFFFC200000160CA bmdma 0xFFFFC20000016008 irq 10
[ 64.124124] ata3: SATA link up 1.5 Gbps (SStatus 113)
[ 64.132559] ata3: dev 0 cfg 49:2f00 82:7869 83:7d09 84:4063 85:7869 86:3c01 87:4063 88:203f
[ 64.132562] ata3: dev 0 ATA-7, max UDMA/100, 390721968 sectors: LBA48
[ 64.144535] ata3: dev 0 configured for UDMA/100
[ 64.144584] scsi4 : sata_sil
[ 64.351703] ata4: SATA link down (SStatus 0)
[ 64.361819] scsi5 : sata_sil
[ 64.362449] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
[ 64.363719] Type: Direct-Access ANSI SCSI revision: 05
[ 64.364303] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 64.364359] sda: Write Protect is off
[ 64.364405] sda: Mode Sense: 00 3a 00 00
[ 64.364417] SCSI device sda: drive cache: write back
[ 64.364505] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 64.364557] sda: Write Protect is off
[ 64.364603] sda: Mode Sense: 00 3a 00 00
[ 64.364614] SCSI device sda: drive cache: write back
[ 64.364662] sda: sda1 sda2
[ 64.380926] sd 4:0:0:0: Attached scsi disk sda
[ 64.560584] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 64.560657] ATIIXP: chipset revision 0
[ 64.560702] ATIIXP: not 100% native mode: will probe irqs later
[ 64.560758] ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio
[ 64.560895] Probing IDE interface ide1...
[ 65.298423] hdc: HP DVD Writer 640b, ATAPI CD/DVD-ROM drive
[ 66.084982] hdd: IDE-DVD ROM 6116, ATAPI CD/DVD-ROM drive
[ 66.147379] ide1 at 0x170-0x177,0x376 on irq 15
[ 66.157431] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 66.157802] Uniform CD-ROM driver Revision: 3.20
[ 66.163598] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(66)
[ 66.281832] ieee1394: Initialized config rom entry `ip1394'
[ 66.335989] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 66.385978] Probing IDE interface ide0...
[ 66.783509] usb-storage: device scan complete
[ 66.784005] Vendor: SEAGATE Model: ST3160212A Rev: 2AAA
[ 66.785345] Type: Direct-Access ANSI SCSI revision: 02
[ 66.786728] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[ 66.787613] sdb: Write Protect is off
[ 66.787663] sdb: Mode Sense: 53 00 00 08
[ 66.787665] sdb: assuming drive cache: write through
[ 66.788478] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[ 66.789363] sdb: Write Protect is off
[ 66.789411] sdb: Mode Sense: 53 00 00 08
[ 66.789413] sdb: assuming drive cache: write through
[ 66.789494] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
[ 66.866328] sd 0:0:0:0: Attached scsi disk sdb
[ 67.508015] Attempting manual resume
[ 67.546986] kjournald starting. Commit interval 5 seconds
[ 67.547047] EXT3-fs: mounted filesystem with ordered data mode.
[ 67.618013] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666008c0904]
[ 67.798586] usb-storage: device scan complete
[ 67.804556] Vendor: Generic Model: USB SD Reader Rev: 1.00
[ 67.805928] Type: Direct-Access ANSI SCSI revision: 00
[ 67.810544] Vendor: Generic Model: USB CF Reader Rev: 1.01
[ 67.811891] Type: Direct-Access ANSI SCSI revision: 00
[ 67.816520] Vendor: Generic Model: USB SM Reader Rev: 1.02
[ 67.817888] Type: Direct-Access ANSI SCSI revision: 00
[ 67.822504] Vendor: Generic Model: USB MS Reader Rev: 1.03
[ 67.823870] Type: Direct-Access ANSI SCSI revision: 00
[ 67.890437] sd 1:0:0:0: Attached scsi removable disk sdc
[ 67.957285] sd 1:0:0:1: Attached scsi removable disk sdd
[ 68.024191] sd 1:0:0:2: Attached scsi removable disk sde
[ 68.091066] sd 1:0:0:3: Attached scsi removable disk sdf
[ 73.182451] ts: Compaq touchscreen protocol output
[ 73.296754] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 73.296849] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 73.296920] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 73.296990] sd 1:0:0:1: Attached scsi generic sg3 type 0
[ 73.297059] sd 1:0:0:2: Attached scsi generic sg4 type 0
[ 73.297128] sd 1:0:0:3: Attached scsi generic sg5 type 0
[ 75.209115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 75.392284] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 75.590472] 8139too Fast Ethernet driver 0.9.27
[ 75.591382] eth0: RealTek RTL8139 at 0xffffc2000006e000, 00:11:09:b5:28:71, IRQ 5
[ 75.591440] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 75.639514] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[ 75.823955] Loaded prism54 driver, version 1.2
[ 75.824260] eth1: uploading firmware...
[ 76.291618] eth1: firmware version: 1.0.4.3
[ 76.291663] eth1: firmware upload complete
[ 76.295347] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1053
[ 76.295414] usbcore: registered new driver usblp
[ 76.295463] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 77.410940] eth1: resetting device...
[ 77.410960] eth1: uploading firmware...
[ 77.492190] eth1: firmware version: 1.0.4.3
[ 77.492240] eth1: firmware upload complete
[ 78.038354] parport0: PC-style at 0x378 [PCSPP,EPP]
[ 78.141912] lp0: using parport0 (polling).
[ 78.190761] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 78.190834] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 78.390533] Adding 2168732k swap on /dev/sdb6. Priority:-1 extents:1 across:2168732k
[ 78.490254] eth1: no 'reset complete' IRQ seen - retrying
[ 78.661991] EXT3 FS on sdb5, internal journal
[ 79.136924] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 79.136979] md: bitmap version 4.39
[ 79.488463] eth1: no 'reset complete' IRQ seen - retrying
[ 79.488519] eth1: interface reset failure
[ 79.488567] prism54: Your card/socket may be faulty, or IRQ line too busy :(
[ 79.540456] eth1: resetting device...
[ 79.540476] eth1: uploading firmware...
[ 79.655847] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[ 79.706442] eth1: firmware version: 1.0.4.3
[ 79.706491] eth1: firmware upload complete
[ 80.184433] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.184661] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.184830] ide: failed opcode was: unknown
[ 80.184915] end_request: I/O error, dev hdd, sector 0
[ 80.184962] Buffer I/O error on device hdd, logical block 0
[ 80.189727] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.189931] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.190098] ide: failed opcode was: unknown
[ 80.190183] end_request: I/O error, dev hdd, sector 4
[ 80.190229] Buffer I/O error on device hdd, logical block 1
[ 80.194476] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.194681] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.194849] ide: failed opcode was: unknown
[ 80.194933] end_request: I/O error, dev hdd, sector 8
[ 80.194980] Buffer I/O error on device hdd, logical block 2
[ 80.199776] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.199980] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.200148] ide: failed opcode was: unknown
[ 80.200232] end_request: I/O error, dev hdd, sector 12
[ 80.200279] Buffer I/O error on device hdd, logical block 3
[ 80.205042] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.205247] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.205415] ide: failed opcode was: unknown
[ 80.205499] end_request: I/O error, dev hdd, sector 16
[ 80.205545] Buffer I/O error on device hdd, logical block 4
[ 80.209824] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.210029] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.210197] ide: failed opcode was: unknown
[ 80.210281] end_request: I/O error, dev hdd, sector 20
[ 80.210328] Buffer I/O error on device hdd, logical block 5
[ 80.215090] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.215295] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.215463] ide: failed opcode was: unknown
[ 80.215548] end_request: I/O error, dev hdd, sector 24
[ 80.215594] Buffer I/O error on device hdd, logical block 6
[ 80.220389] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.220609] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.220777] ide: failed opcode was: unknown
[ 80.220861] end_request: I/O error, dev hdd, sector 28
[ 80.220907] Buffer I/O error on device hdd, logical block 7
[ 80.225148] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.225353] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.225521] ide: failed opcode was: unknown
[ 80.225605] end_request: I/O error, dev hdd, sector 0
[ 80.225652] Buffer I/O error on device hdd, logical block 0
[ 80.230450] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.230654] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.230821] ide: failed opcode was: unknown
[ 80.230906] end_request: I/O error, dev hdd, sector 4
[ 80.230952] Buffer I/O error on device hdd, logical block 1
[ 80.642804] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.643701] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.643869] ide: failed opcode was: unknown
[ 80.643953] end_request: I/O error, dev hdd, sector 771584
[ 80.706267] eth1: no 'reset complete' IRQ seen - retrying
[ 80.966222] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 80.966426] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 80.966594] ide: failed opcode was: unknown
[ 80.966679] end_request: I/O error, dev hdd, sector 0
[ 81.107684] hdd: command error: status=0x51 { DriveReady SeekComplete Error }
[ 81.107894] hdd: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 81.108062] ide: failed opcode was: unknown
[ 81.108147] end_request: I/O error, dev hdd, sector 0
[ 81.704474] eth1: no 'reset complete' IRQ seen - retrying
[ 81.704562] eth1: interface reset failure
[ 81.704609] prism54: Your card/socket may be faulty, or IRQ line too busy :(
[ 82.907614] NET: Registered protocol family 17
[ 97.965249] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 98.003783] NTFS volume version 3.1.
[ 98.087683] ReiserFS: sdb7: found reiserfs format "3.6" with standard journal
[ 102.757536] ReiserFS: sdb7: using ordered data mode
[ 102.775126] ReiserFS: sdb7: journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 102.776954] ReiserFS: sdb7: checking transaction log (sdb7)
[ 102.789482] ReiserFS: sdb7: Using r5 hash to sort names
[ 106.605326] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[ 106.619598] powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[ 106.619601] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
[ 106.619604] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[ 106.619606] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
[ 106.619610] cpu_init done, current fid 0xe, vid 0x2
[ 107.599806] ppdev: user-space parallel port driver
[ 110.469863] Bluetooth: Core ver 2.8
[ 110.469916] NET: Registered protocol family 31
[ 110.469963] Bluetooth: HCI device and connection manager initialized
[ 110.470020] Bluetooth: HCI socket layer initialized
[ 110.484813] Bluetooth: L2CAP ver 2.8
[ 110.484865] Bluetooth: L2CAP socket layer initialized
[ 110.492254] Bluetooth: RFCOMM socket layer initialized
[ 110.492321] Bluetooth: RFCOMM TTY layer initialized
[ 110.492370] Bluetooth: RFCOMM ver 1.7
[ 111.641707] [drm] Initialized drm 1.0.1 20051102
[ 111.661344] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[ 117.598773] [drm] Setting GART location based on new memory map
[ 117.598911] [drm] Loading R300 Microcode
[ 117.598928] [drm] writeback test succeeded in 1 usecs
[ 145.915438] NET: Registered protocol family 10
[ 145.915505] lo: Disabled Privacy Extensions
[ 145.915563] IPv6 over IPv4 tunneling driver
Reply to: