[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: nessun browser apre specifici siti - risolto



Il giorno sab, 10/06/2006 alle 08.22 +0300, Maxx ha scritto:

> Ci dici come sono le netmask di tutte le tue schede di rete? 
> (p.es. con ifconfig -a)
> 
> Visto che hai un router con IP 192.qualcosa e hai problemi a raggiungere
> 192.qualcosaltro, magari la netmask è troppo ampia.
> 
> Altro consiglio, se sai leggere l'output di ethereal, tienilo in funzione
> mentre fai le prove, così puoi controllare se i DNS la contano giusta, se 
> riusci a raggiungere certi siti, ecc.
Questo è quello che riporta ifconfig, dove eth0 è l'interfaccia di rete
ethernet, eth1 è la wireless, eth2 è la firewire e sit0 se non erro
dovrebbe servire per cammbiare da ipv4 a ipv6 ma probabilmente lo sai
meglio di me:

eth0      Link encap:Ethernet  HWaddr 00:02:3F:1B:2D:CF
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::202:3fff:fe1b:2dcf/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3652 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4192 errors:0 dropped:0 overruns:0 carrier:0
          collisions:36 txqueuelen:1000
          RX bytes:1231295 (1.1 MiB)  TX bytes:568714 (555.3 KiB)
          Interrupt:10 Base address:0xa000

eth1      Link encap:Ethernet  HWaddr 00:0E:35:42:03:B8
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:10 Memory:d0000000-d0000fff

eth2      Link encap:UNSPEC  HWaddr
00-02-3F-48-52-00-21-E2-00-00-00-00-00-00-00-00
          inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:157 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:24373 (23.8 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8851 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8851 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2624440 (2.5 MiB)  TX bytes:2624440 (2.5 MiB)

sit0      Link encap:IPv6-in-IPv4
          inet6 addr: ::127.0.0.1/96 Scope:Unknown
          inet6 addr: ::192.168.3.1/96 Scope:Compat
          inet6 addr: ::192.168.1.2/96 Scope:Compat
          UP RUNNING NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

Il problema penso era la firewire a cui avevo assegnato l'indirizzo il
192.168.1.3 che a quanto pare è utilizzato anche da sit0. 
Però c'è sempre qualcosa che non funziona correttamente: se faccio
"traceroute www.debian.org" ho:
traceroute to www.debian.org (192.25.206.10), 30 hops max, 40 byte
packets
 1  startmod (192.168.1.1)  0.695 ms  0.679 ms  0.730 ms
 2  * * *
 3  * * *
 4  * * *

E' possibile che il mio provider non mi permetta di fare traceroute?
Ciao
Andrea





Reply to: