[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: intel 2200BG al boot



Alle 10:55, giovedì 18 maggio 2006, Gennaro Del Campo ha scritto:
> All'avvio del mio sistema mi si presenta il seguente problema:
> la scheda wireless intel 2200BG non mi viene affatto riconosciuta (come
> se non esistesse). Il problema si verifica solo quando il mio notebook è
> alimentato dalla sola batteria.
> Di seguito riporto l'output del comando "/dmesg | grep ipw2200" /quando
> mi si verifica l'errore:
> /
> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
> ipw2200: Copyright(c) 2003-2006 Intel Corporation
> ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
> ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
> ipw2200: Unable to load firmware: -2
> ipw2200: failed to register network device
> ipw2200: probe of 0000:01:04.0 failed with error -5

Da http://ipw2200.sourceforge.net/ sezione Issues:

In some kernel configurations (users have most frequently reported the problem 
only with 2.6.9), the default timeout value for the hotplug subsystem is too 
low. You may have this problem if you see the following in your kernel log 
(via dmesg or /var/log/messages): 
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw-2.2-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: 0xFFFFFFFE
ipw2200: failed to register network device
ipw2200: probe of 0000:00:0b.0 failed with error -5

 To work around this, you can increase the default timeout value: 
        echo 100 > /sys/class/firmware/timeout

 and then reload the ipw2200 module. If this corrects your problem, you may 
wish to add the above line to your system startup scripts prior to the point 
at which the driver module would be loaded. 

Quello che non ho capito è qual'è il modo migliore per settare quel valore 
all'avvio. Pensavo si dovesse usare sysctl.conf, ma sysctl -a non mostra 
quella chiave fra i parametri modificabili (e infatti 
modificando /etc/sysctl.conf non funziona). Qualcuno sa come fare?

Ciao,
Flavio





___________________________________
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it



Reply to: