Per piacere...rassicuratemi e datemi delle dritte
Ciao a tutti........
mi sono spaventato leggendo il resoconto di:
dmesg | tail
che è il seguente:
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
hub.c: new USB device 00:1d.0-1, assigned address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:3.0
b44: eth0: Link is down.
b44: eth0: Link is up at 10 Mbps, half duplex.
b44: eth0: Flow control is off for TX and off for RX.
apm: BIOS not found.
Ma allora non dovrebbe accendersi nemmeno la ventola di raffreddamento,
invece si accende............
Quindi è un rischio usare il laptop in questo modo?
Come posso risolvere?
Per piacere spiegatemi perchè sono ignorante in questo.
Ditemi quali altri comandi e le relative informazioni devo fornirvi e sarà fatto :)
Comunque in fondo al messaggio vi posto l'intero resoconto di "dmesg".
Soprattutto vi chiedo gentilmente di spiegarmi sinceramente come stanno
le cose.....perchè il mio Dell Inspiron 9300 (comprato dopo tante fatiche)
devo.... e sottolineo devo farmelo durare.........
Grazie
dmesg:
Linux version 2.4.27-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc
version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 17:03:22 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffda000 (usable)
BIOS-e820: 000000007ffda000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 524250
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 294874 pages.
ACPI: RSDP (v000
DELL
) @ 0x000fc9b0
ACPI: RSDT (v001 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x7ffda7d3
ACPI: FADT (v001 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x7ffdb400
ACPI: MADT (v001 DELL CPi R 0x27d50913 ASL 0x00000047) @ 0x7ffdbc00
ACPI: MCFG (v016 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x7ffdbbc0
ACPI: BOOT (v001 DELL CPi R 0x27d50913 ASL 0x00000061) @ 0x7ffdb7c0
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x7ffdabe6
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x7ffdaa0e
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x7ffda813
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Kernel command line: root=/dev/hda3 ro
Found and enabled local APIC!
Initializing CPU#0
Detected 1862.170 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3709.33 BogoMIPS
Memory: 2065796k/2097000k available (1197k kernel code, 30816k reserved, 452k data, 116k init, 1179496k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: afe9fbff 00100000 00000000 00000000
CPU: Common caps: afe9fbff 00100000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1862.2219 MHz.
..... host bus clock speed is 133.0158 MHz.
cpu: 0, clocks: 1330158, slice: 665079
CPU0<T0:1330144,T1:665056,D:9,S:665079,C:1330158>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/2641] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
PCI: Found IRQ 10 for device 00:1e.3
PCI: Sharing IRQ 10 with 00:1d.1
PCI: Sharing IRQ 10 with 00:1f.2
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 03:01.2
PCI: Sharing IRQ 10 with 03:03.0
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4084 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 4084k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
hda: ST960822A, ATA DISK drive
hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 117210240 sectors (60012 MB) w/8192KiB Cache, CHS=7296/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 1421712k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Real Time Clock Driver v1.10f
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: _NEC Model: DVD+-RW ND-6650A Rev: 102C
Type:
CD-ROM
ANSI SCSI revision: 02
sbp2: $Rev: 1074 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 9 for device 03:01.1
PCI: Sharing IRQ 9 with 00:1d.2
PCI: Sharing IRQ 9 with 03:00.0
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[dcffc800-dcffcfff] Max Packet=[2048]
b44.c:v0.93 (Mar, 2004)
PCI: Found IRQ 9 for device 03:00.0
PCI: Sharing IRQ 9 with 00:1d.2
PCI: Sharing IRQ 9 with 03:01.1
eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:de:de:48
ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc00039000050]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:07:23 May 16 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 00:1d.7
PCI: Sharing IRQ 11 with 00:1e.2
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xbf80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:1d.1
PCI: Sharing IRQ 10 with 00:1e.3
PCI: Sharing IRQ 10 with 00:1f.2
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 03:01.2
PCI: Sharing IRQ 10 with 03:03.0
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xbf60, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1d.2
PCI: Sharing IRQ 9 with 03:00.0
PCI: Sharing IRQ 9 with 03:01.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xbf40, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 7 for device 00:1d.3
PCI: Sharing IRQ 7 with 03:01.0
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xbf20, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc03d) is not claimed by any active driver.
Intel 810 + AC97 Audio, version 1.01, 17:06:52 May 16 2005
PCI: Found IRQ 11 for device 00:1e.2
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 00:1d.7
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1e.2 to 64
i810: Intel ICH4 found at IO 0xec40 and 0xed00, MEM 0xdffffe00 and 0xdffffd00, IRQ 11
i810: Intel ICH4 mmio at 0xf89b1e00 and 0xf89b3d00
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7650 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
i810_rng hardware driver 0.9.8 loaded
hw_random: cannot enable RNG, aborting
PCI: Found IRQ 11 for device 00:1d.7
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 00:1e.2
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: PCI device 8086:265c (Intel Corp.)
ehci_hcd 00:1d.7: irq 11, pci mem f89bf800
usb.c: new USB bus registered, assigned bus number 5
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 32 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
usb.c: USB disconnect on device 00:1d.0-1 address 2
hub.c: USB hub found
hub.c: 8 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
uhci.c: USB Universal Host Controller Interface driver v1.1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
hub.c: new USB device 00:1d.0-1, assigned address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:3.0
b44: eth0: Link is down.
b44: eth0: Link is up at 10 Mbps, half duplex.
b44: eth0: Flow control is off for TX and off for RX.
apm: BIOS not found.
Reply to: