2.6.12 e usb
Salve a tutti,
da quando sono passato al kernel 2.6.12 la mia scheda usb ha smesso di
funzionare. È una scheda pci sempre riconosciuta e sempre funzionante.
Infatti da un "cat /var/log/kern.log" risulta:
Aug 26 09:23:16 tower kernel: ehci_hcd 0000:00:0d.3: ALi Corporation
USB 2.0 Controller
Aug 26 09:23:16 tower kernel: ehci_hcd 0000:00:0d.3: debug port 1
Aug 26 09:23:16 tower kernel: ehci_hcd 0000:00:0d.3: new USB bus
registered, assigned bus number 1
Aug 26 09:23:16 tower kernel: ehci_hcd 0000:00:0d.3: irq 9, io mem
0xba000000
Aug 26 09:23:16 tower kernel: ehci_hcd 0000:00:0d.3: USB 2.0
initialized, EHCI 1.00, driver 10 Dec 2004
Aug 26 09:23:16 tower kernel: hub 1-0:1.0: USB hub found
Aug 26 09:23:16 tower kernel: hub 1-0:1.0: 6 ports detected
Aug 26 09:23:16 tower kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Aug 26 09:23:16 tower kernel: PCI: Found IRQ 5 for device 0000:00:0a.0
Aug 26 09:23:16 tower kernel: PCI: Sharing IRQ 5 with 0000:00:0d.2
Quindi la scheda è vista correttamente. Quando inserisco però la penna
ottengo:
Aug 26 09:27:52 tower kernel: usb 1-6: new high speed USB device using ehci_hcd and address 2
Aug 26 09:27:52 tower kernel: usb 1-6: can't set config #1, error -71
Aug 26 09:27:52 tower kernel: usb 1-6: new high speed USB device using ehci_hcd and address 3
Aug 26 09:27:55 tower kernel: usb 1-6: can't set config #1, error -71
Aug 26 09:27:55 tower kernel: usb 1-6: new high speed USB device using ehci_hcd and address 4
Aug 26 09:27:55 tower kernel: usb 1-6: can't set config #1, error -71
Aug 26 09:27:55 tower kernel: usb 1-6: new high speed USB device using ehci_hcd and address 5
Aug 26 09:27:56 tower kernel: SCSI subsystem initialized
Aug 26 09:27:56 tower kernel: Initializing USB Mass Storage driver...
Aug 26 09:27:56 tower kernel: usb-storage: USB Mass Storage device detected
Aug 26 09:27:56 tower kernel: usb-storage: -- associate_dev
Aug 26 09:27:56 tower kernel: usb-storage: Vendor: 0x0ea0, Product: 0x2168, Revision: 0x0200
Aug 26 09:27:56 tower kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Aug 26 09:27:56 tower kernel: usb-storage: Transport: Bulk
Aug 26 09:27:56 tower kernel: usb-storage: Protocol: Transparent SCSI
Aug 26 09:27:56 tower kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Aug 26 09:27:56 tower kernel: usb-storage: GetMaxLUN command result is 1, data is 0
Aug 26 09:27:56 tower kernel: usb-storage: *** thread sleeping.
Aug 26 09:27:56 tower kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Aug 26 09:27:56 tower kernel: usb-storage: device found at 5
Aug 26 09:27:56 tower kernel: usb-storage: waiting for device to settle before scanning
Aug 26 09:27:56 tower kernel: usbcore: registered new driver usb-storage
Aug 26 09:27:56 tower kernel: USB Mass Storage support registered.
Aug 26 09:27:56 tower kernel: ub: sizeof ub_scsi_cmd 68 ub_dev 2384 ub_lun 140
Aug 26 09:27:56 tower kernel: usbcore: registered new driver ub
Aug 26 09:28:01 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:01 tower kernel: usb-storage: *** thread awakened.
Aug 26 09:28:01 tower kernel: usb-storage: Command INQUIRY (6 bytes)
Aug 26 09:28:01 tower kernel: usb-storage: 12 00 00 00 24 00
Aug 26 09:28:01 tower kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Aug 26 09:28:01 tower kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 26 09:28:01 tower kernel: usb-storage: Status code -71; transferred 0/31
Aug 26 09:28:01 tower kernel: usb-storage: -- unknown error
Aug 26 09:28:01 tower kernel: usb-storage: Bulk command transfer result=4
Aug 26 09:28:01 tower kernel: usb-storage: -- transport indicates error, resetting
Aug 26 09:28:01 tower kernel: usb-storage: usb_stor_Bulk_reset called
Aug 26 09:28:01 tower kernel: usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Aug 26 09:28:07 tower kernel: usb-storage: command_abort called
Aug 26 09:28:07 tower kernel: usb-storage: Soft reset: clearing bulk-in endpoint halt
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_clear_halt: result = 0
Aug 26 09:28:07 tower kernel: usb-storage: Soft reset: clearing bulk-out endpoint halt
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_clear_halt: result = 0
Aug 26 09:28:07 tower kernel: usb-storage: Soft reset done
Aug 26 09:28:07 tower kernel: usb-storage: scsi cmd done, result=0x70000
Aug 26 09:28:07 tower kernel: usb-storage: *** thread sleeping.
Aug 26 09:28:07 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:07 tower kernel: usb-storage: *** thread awakened.
Aug 26 09:28:07 tower kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Aug 26 09:28:07 tower kernel: usb-storage: 00 00 00 00 00 00
Aug 26 09:28:07 tower kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 0 F 0 Trg 0 LUN 0 CL 6
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Aug 26 09:28:07 tower kernel: usb-storage: Status code 0; transferred 31/31
Aug 26 09:28:07 tower kernel: usb-storage: -- transfer complete
Aug 26 09:28:07 tower kernel: usb-storage: Bulk command transfer result=0
Aug 26 09:28:07 tower kernel: usb-storage: Attempting to get CSW...
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Aug 26 09:28:07 tower kernel: usb-storage: Status code -71; transferred 0/13
Aug 26 09:28:07 tower kernel: usb-storage: -- unknown error
Aug 26 09:28:07 tower kernel: usb-storage: Bulk status result = 4
Aug 26 09:28:07 tower kernel: usb-storage: -- transport indicates error, resetting
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_Bulk_reset called
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Aug 26 09:28:07 tower kernel: usb-storage: Soft reset failed: -71
Aug 26 09:28:07 tower kernel: usb-storage: scsi cmd done, result=0x70000
Aug 26 09:28:07 tower kernel: usb-storage: *** thread sleeping.
Aug 26 09:28:07 tower kernel: usb-storage: device_reset called
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_Bulk_reset called
Aug 26 09:28:07 tower kernel: usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Aug 26 09:28:07 tower kernel: usb-storage: Soft reset failed: -71
Aug 26 09:28:07 tower kernel: usb-storage: bus_reset called
Aug 26 09:28:07 tower kernel: usb 1-6: reset high speed USB device using ehci_hcd and address 5
Aug 26 09:28:07 tower kernel: usb 1-6: device descriptor read/64, error -71
Aug 26 09:28:07 tower kernel: usb 1-6: device descriptor read/64, error -71
Aug 26 09:28:08 tower kernel: usb 1-6: reset high speed USB device using ehci_hcd and address 5
Aug 26 09:28:08 tower kernel: usb-storage: usb_reset_device returns -19
Aug 26 09:28:08 tower kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
Aug 26 09:28:08 tower kernel: usb 1-6: USB disconnect, address 5
Aug 26 09:28:08 tower kernel: usb-storage: storage_disconnect() called
Aug 26 09:28:08 tower kernel: usb-storage: usb_stor_stop_transport called
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: queuecommand called
Aug 26 09:28:08 tower kernel: usb-storage: Fail command during disconnect
Aug 26 09:28:08 tower kernel: usb-storage: device scan complete
Aug 26 09:28:08 tower kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000048
Aug 26 09:28:08 tower kernel: printing eip:
Aug 26 09:28:08 tower kernel: c01947ab
Aug 26 09:28:08 tower kernel: *pde = 00000000
Aug 26 09:28:08 tower kernel: Oops: 0000 [#1]
Aug 26 09:28:08 tower kernel: PREEMPT
Aug 26 09:28:08 tower kernel: Modules linked in: ub usb_storage scsi_mod ipt_ULOG ipt_MASQUERADE ipt_limit ipt_state vmnet parport_pc vmmon psmouse fglrx lp parport i2c_ali15x3 snd_cmipci gameport snd_opl3_lib snd_hwdep snd_mpu401_uart snd_rawmidi ali_agp agpgart usblp ohci_hcd evdev snd_pcm_oss snd_pcm snd_page_alloc snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd w83781d i2c_sensor i2c_ali1535 i2c_core ip_nat_irc ip_conntrack_irc ip_nat_ftp ip_conntrack_ftp 3c59x mii pci_hotplug ehci_hcd
Aug 26 09:28:08 tower kernel: CPU: 0
Aug 26 09:28:08 tower kernel: EIP: 0060:[sysfs_hash_and_remove+11/231] Tainted: P VLI
Aug 26 09:28:08 tower kernel: EFLAGS: 00010292 (2.6.12)
Aug 26 09:28:08 tower kernel: EIP is at sysfs_hash_and_remove+0xb/0xe7
Aug 26 09:28:08 tower kernel: eax: 00000000 ebx: d31a0e4c ecx: d31a0d90 edx: d31a0e44
Aug 26 09:28:08 tower kernel: esi: d31a0e44 edi: e11703e0 ebp: e1170380 esp: c153bddc
Aug 26 09:28:08 tower kernel: ds: 007b es: 007b ss: 0068
Aug 26 09:28:08 tower kernel: Process khubd (pid: 10, threadinfo=c153a000 task=dffb8a40)
Aug 26 09:28:08 tower kernel: Stack: d1980830 00000001 d31a0e4c d31a0e44 e11703e0 e1170380 c030d29c 00000000
Aug 26 09:28:08 tower kernel: c041b42d d31a0e44 d31a0d90 d1980800 d6315dc0 c030d2e0 d31a0e44 d31a0c00
Aug 26 09:28:08 tower kernel: e1161d56 d31a0e44 00000003 d31a0c00 d19807f8 d1980800 e1161e68 d31a0c00
Aug 26 09:28:08 tower kernel: Call Trace:
Aug 26 09:28:08 tower kernel: [class_device_del+172/224] class_device_del+0xac/0xe0
Aug 26 09:28:08 tower kernel: [class_device_unregister+16/32] class_device_unregister+0x10/0x20
Aug 26 09:28:08 tower kernel: [pg0+549662038/1068299264] scsi_remove_device+0x46/0xc0 [scsi_mod]
Aug 26 09:28:08 tower kernel: [pg0+549662312/1068299264] __scsi_remove_target+0x98/0xf0 [scsi_mod]
Aug 26 09:28:08 tower kernel: [pg0+549657719/1068299264] scsi_forget_host+0x47/0x90 [scsi_mod]
Aug 26 09:28:08 tower kernel: [pg0+549626599/1068299264] scsi_remove_host+0x17/0x80 [scsi_mod]
Aug 26 09:28:08 tower kernel: [pg0+548951926/1068299264] storage_disconnect+0x66/0x84 [usb_storage]
Aug 26 09:28:08 tower kernel: [usb_unbind_interface+120/128] usb_unbind_interface+0x78/0x80
Aug 26 09:28:08 tower kernel: [device_release_driver+119/128] device_release_driver+0x77/0x80
Aug 26 09:28:08 tower kernel: [bus_remove_device+121/192] bus_remove_device+0x79/0xc0
Aug 26 09:28:08 tower kernel: [device_del+87/176] device_del+0x57/0xb0
Aug 26 09:28:08 tower kernel: [usb_disable_device+144/272] usb_disable_device+0x90/0x110
Aug 26 09:28:08 tower kernel: [usb_disconnect+170/352] usb_disconnect+0xaa/0x160
Aug 26 09:28:08 tower kernel: [hub_port_connect_change+820/1088] hub_port_connect_change+0x334/0x440
Aug 26 09:28:08 tower kernel: [clear_port_feature+88/96] clear_port_feature+0x58/0x60
Aug 26 09:28:08 tower kernel: [hub_events+514/1040] hub_events+0x202/0x410
Aug 26 09:28:08 tower kernel: [hub_thread+55/272] hub_thread+0x37/0x110
Aug 26 09:28:08 tower kernel: [autoremove_wake_function+0/96] autoremove_wake_function+0x0/0x60
Aug 26 09:28:08 tower kernel: [ret_from_fork+6/20] ret_from_fork+0x6/0x14
Aug 26 09:28:08 tower kernel: [autoremove_wake_function+0/96] autoremove_wake_function+0x0/0x60
Aug 26 09:28:08 tower kernel: [hub_thread+0/272] hub_thread+0x0/0x110
Aug 26 09:28:08 tower kernel: [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10
Aug 26 09:28:08 tower kernel: Code: eb cc 8b 5c 24 08 8b 74 24 0c 8b 7c 24 10 83 c4 14 e9 8a 97 25 00 8d 76 00 8d bc 27 00 00 00 00 55 57 56 53 83 ec 08 8b 44 24 1c <8b> 48 48 8b 50 08 ff 4a 70 0f 88 cd 00 00 00 8b 51 0c 8d 6a fc
Ed la penna non funziona. Non riesco a capire quale sia il problema.
Qualche suggerimento? Non è un problema della penna in quanto in un
altro pc viene vista correttamente.
Grazie e ciao
InSa
Ps: sono su sid aggiornata a ieri.
--
++ Powered by Sid ++
Reply to: