Re: usb-storage
lindis wrote:
> Mattia Dongili wrote:
>
>> On Mon, Jan 31, 2005 at 08:56:28PM +0100, lindis wrote:
>> [...]
>>> PS. Con aptitude si scaricano i sorgenti ma poi bisogna compilare con
>>> make ect.. e' cosi'?
>>
>> noooo :) lascia stare per il momento, avrai tempo per cimentarti con la
>> compilazione del kernel.
>>
>> installa un'immagine del kernel, cerca kernel-image-2.6 o
>> kernel-image-2.4, non dovresti avere grossi problemi.
>>
>> basta scegliere:
>>
>> # apt-cache search kernel-image 686
>
>
> OK ci provero'.
>
> Grazie mille.
>
>
Ho provato ad installare sul desktop il kernel 2.4.27 con apt-get: e'
andato tutto una meraviglia. Finalmente e' comparso sd_mod ed anche ehci.
Ora all'avvio posso scegliere con quale kernel partire 2.4.18 o 2.4.27.
Ho dovuto pero' fare un artificio per poter lavorare con il lettore DVD ed
il masterizzatore CD in quanto il kernel anziche' 2 me ne vede molti di
piu'. Posso montare questi devices chiamandoli /dev/scd6 e /dev/scd13
rispettivamente.
Questo il dmesg:
Linux version 2.4.27-2-686 (horms@charles.lab.ultramonkey.org) (gcc version
3.3.5 (Debian 1:3.3.5-6)) #1 Thu Jan 20 11:10:41 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000f5570
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 KM400A ) @ 0x000f7020
ACPI: RSDT (v001 KM400A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 KM400A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: MADT (v001 KM400A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff7600
ACPI: DSDT (v001 KM400A AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: BOOT_IMAGE=linux_2.4.27 ro root=308
Initializing CPU#0
Detected 1660.003 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3309.56 BogoMIPS
Memory: 252560k/262080k available (1197k kernel code, 9132k reserved, 451k
data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-18, 2-19, 2-20 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 99
16 001 01 1 1 0 1 0 1 1 A1
17 001 01 1 1 0 1 0 1 1 A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1659.8864 MHz.
..... host bus clock speed is 331.9772 MHz.
cpu: 0, clocks: 3319772, slice: 1659886
CPU0<T0:3319760,T1:1659872,D:2,S:1659886,C:3319772>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb9e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B0,I16,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P0) -> 22
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B0,I18,P0) -> 23
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:10.0, from 11 to 5
PCI: Via IRQ fixup for 00:10.1, from 11 to 5
PCI: Via IRQ fixup for 00:10.2, from 10 to 5
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0/ - \ | done.
Freeing initrd memory: 3976k freed
RAMDISK: Loading 3976 blocks [1 disk] into ram disk... |/-\....|done.
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
blk: queue d0829cc0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue d0829dfc, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 40132503 sectors (20548 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63,
UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [2498/255/63] p1 p2 < p5 p6 p7 p8
>
/dev/ide/host0/bus0/target1/lun0: [PTBL] [9964/255/63] p1 p2 < p5 p6 p7 p8
p9 p10 >
Journalled Block Device driver loaded
ext3: No journal on filesystem on ide0(3,8)
Adding Swap: 409616k swap-space (priority -1)
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 11:16:14 Jan 20 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe800, 00:11:2f:42:65:f1, IRQ 23.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVD-ROM GDR8163B Rev: 0L23
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
usb.c: registered new driver usbscanner
scanner.c: 0.4.16:USB Scanner Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:10.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x4a9/0x2214) is not claimed by any active
driver.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 21, pci mem d0951000
usb.c: new USB bus registered, assigned bus number 4
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
usb.c: USB disconnect on device 00:10.1-2 address 2
hub.c: USB hub found
hub.c: 6 ports detected
hub.c: new USB device 00:10.3-4, assigned address 2
usb.c: USB device 2 (vend/prod 0x4a9/0x2214) is not claimed by any active
driver.
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.
ho provato anche a dare all'avvio il comando max_scsi_luns=1 ma senza
nessun risultato.
Ad ogni modo questo non e' un problema. Ho provato a leggere vari HOWTO ma
non ho trovato nulla. Ora provero' ad installare il 2.4.27 sul portatile...
Un ultima cosa: perche' dev/hda in alcune occasioni e' definito
/dev/ide/host0/bus0/target0/lun0 ? Anche qui non sono riuscito a trovare
nulla. Forse non sono ancora bravo a cercare...
Ringrazio per gli aiuti ricevuti e per quelli che verranno. Spero di poter
dare anch'io aiuto a qualcuno, ma il mio attuale livello di conoscenze non
me lo consente ancora.
Saluti.
PS. Rispondo tardi perche' ho subito un infortunio che mi ha bloccato per
diversi giorni. Scusatemi.
Reply to: