errore di copia incolla......... sempre problema su laptop con knoppix
Scusate.....ho abbassato l'ip sul desktop su consiglio di un'altro utente (ma non e' cambiato nulla) e ho riportato i vecchi dati di ping....
Non ci sono firewall tra i due pc e sono collegati con un cavo cross.
Se al posto di knoppix sul laptop faccio partire la mandrake tutto va e sul desktop ho sempre una knoppix 3.3.
questo e' l'output di ifconfig sul laptop:
eth0 Link encap:Ethernet HWaddr 00:00:E2:99:B3:9B
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:3 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:69 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6324 (6.1 KiB) TX bytes:6324 (6.1 KiB)
l'out di ping sul laptop:
root@whiterabbit:/home/knoppix# ping 192.168.0.3
PING 192.168.0.3 (192.168.0.3): 56 data bytes
--- 192.168.0.3 ping statistics ---
22 packets transmitted, 0 packets received, 100% packet loss
ifconfig sul desktop
eth0 Link encap:Ethernet HWaddr 00:50:FC:9E:28:B7
inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:9 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:120 errors:0 dropped:0 overruns:0 frame:0
TX packets:120 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7824 (7.6 KiB) TX bytes:7824 (7.6 KiB)
route -n = su entrambe le macchine
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
Per quanto riguarda la scheda audio AC' 97 non va neanche nella fase di live da cd....si presentano sempre gli stessi msg di errore...
ecco gli output di lsmod e lspci
root@whiterabbit:/home/knoppix# lspci
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 01)
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 01)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:09.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
root@whiterabbit:/home/knoppix# lsmod
Module Size Used by Not tainted
i830 69248 10
agpgart 38296 11
autofs4 8756 0 (unused)
af_packet 13448 0 (unused)
ext3 64132 0 (unused)
jbd 46292 0 [ext3]
ntfs 51168 0 (unused)
msdos 4652 0 (unused)
nls_iso8859-1 2844 0 (unused)
nls_cp437 4348 0 (unused)
soundcore 3428 0 (unused)
8139too 17096 1
mii 2240 0 [8139too]
crc32 2816 0 [8139too]
serial 51972 0
usb-uhci 21836 0 (unused)
usbcore 57472 0 [usb-uhci]
ds 6536 1
yenta_socket 9408 1
pcmcia_core 39712 0 [ds yenta_socket]
apm 9768 2
rtc 6908 0
reiserfs 169392 1
Grazie dell'aiuto
Francesco
Reply to: