[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Ho un paio di problemi da risolvere



Salve a tutti, questa è la prima volta che scrivo.
Colgo l'occasione per salutare tutti e ringraziare già da ora per
l'aiuto che mi darete.

Ho un paio di cosette da chiedere (ho Debian Woody -MITTICAAAA-):

1) Ho un masterizzatore Waitec Storm40. Il kernel l'ho ricompilato
(2.4.21), tutti i vari moduli ide-scsi etc.. sono a posto (il kernel,
insomma dovrebbe essere ok). Tuttavia cdrdao dice che non c'è un driver
che vada bene per il mio cdwriter (lo riconosce però, conferma che il
kernel è a posto) e anche cdrecord si lamenta e non scrive nulla. La mia
domanda è: aggiornare cdrecord alla versione 2.0 dovrebbe risolvere il
problema o no (ora è 1.10)? Chiedo perchè apt mi spara 13 Mb tra
dipendenze varie, e magari non ottengo nulla (connessione 56k - sapete
com'è).


2) La mia scheda video è Geforce 4. Ho installato driver e fatto tutte
le modifiche correttamente, da documentazione. Quando però entro in X e
poi torno alla modalità testuale, i font di quest'ultima sono sballati e
il testo trasborda fuori dallo schermo. Col kernel Debian mi sembrava
ciò non accadesse. Che opzione non ho messo nella configurazione?
Confrontando col config di Debian si fa fatica a capire, visto che le
opzioni sono quasitutte selezionate.
E' forse dovuto invece al driver Nvidia? O a font non caricati in
modalità testuale?

Allego il log ricavato da /var/log/gdm/\:0.log.4 (magari chi è esperto
lo sa esaminare -prendo il log.4 perchè mi sembra quello con più roba. 
Non so in che differisca dagli altri con 1,2,3. Io capisco qualcosa, ma
non so risolvere il problema). E' infondo alla mail, vista la lunghezza.

3) Qualcuno ha esperienza con rivatv, il tool che permette di usare la
scheda tv integrata con le schede Nvidia? Io ho un "Gainward Geforce4
Pro 650 TV Golden Sample" e non riesco a farla partire, non trova
/dev/video0 (ma c'è in /dev). Un log interessante è (da dmesg):

rivatv: nVidia card found - rivatv0
rivatv: Identified your board as Gainward Geforce4 Pro 650 TV Golden
Sample
rivatv: Attempting to load module saa7108e
i2c-core.o: driver SAA7108E registered.
rivatv: MTRR successfully enabled
rivatv: PCI nVidia NV10 card detected (GeForce4 MX4x0 [0x170], 64MB @
0xD8000000)
rivatv: I2C adapter driver for NVIDIA cards
i2c-algo-bit.o: NVIDIA display adapter bus 2 i2c_write: error - bailout.
i2c-algo-bit.o: NVIDIA display adapter bus 2 i2c_write: error - bailout.
i2c-core.o: adapter NVIDIA display adapter bus 2 registered as adapter
0.
i2c-algo-bit.o: NVIDIA display adapter bus 1 i2c_write: error - bailout.
i2c-algo-bit.o: NVIDIA display adapter bus 1 i2c_write: error - bailout.
i2c-core.o: adapter NVIDIA display adapter bus 1 registered as adapter
1.
i2c-core.o: adapter NVIDIA display adapter bus 0 registered as adapter
2.
rivatv: procfs file registered for rivatv0
rivatv: allocated YUV capture buffer (812 kb)
rivatv: AGPGART: not available
rivatv: AGP: disabled
rivatv: Hash table layout: 16kB (11 bits) @ 0xE8710000
rivatv: NVdriver (nvidia) detected, DMA not supported
rivatv: successfully requested IRQ 11
rivatv: Video4Linux device driver registered



e (da /proc/driver/rivatv)

nVidia Chip:    GeForce4 MX4x0
Model:          Gainward Geforce4 Pro 650 TV Golden Sample
Architecture:   NV10 (NV17)
Access:         Control [0xe8000000-0xe8ffffff]
                FB      [0xd8000000-0xdfffffff]
Interrupts:     0 out of 29266 (DMA: 0, Overlay: 0, Missing: 29266)
Device:         available
VideoDecoder:   unavailable
Tuner:          unavailable
AudioDecoder:   unavailable
AudioProcessor: unavailable
IR chip:        unavailable


Se potete aiutarmi...
So che è molto, ma ve ne sarei molto grato. Grazie ancora.
W Linux e Debian! :)



Ciao!


jordan83




ecco /var/log/gdm/\:0.log.4


warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Aug 13 09:57:53 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "it"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0170) rev 163, Mem @
0xe8000000/24, 0xd8000000/27, 0xe0000000/19
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.4496
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.4496
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) NVIDIA XFree86 Driver  1.0-4496  Wed Jul 16 19:06:03 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE8000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 460
(--) NVIDIA(0): VideoBIOS: 04.17.00.45.00
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Detected TV Encoder: NVIDIA
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 350
MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350
MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350
MHz
(WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-0
(II) NVIDIA(0): Generic Monitor: Using hsync range of 30.00-60.00 kHz
(II) NVIDIA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0):      Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1
Hz
(**) NVIDIA(0):      Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) [GLX]: Initializing GLX extension
PEXExtensionInit: Couldn't open default PEX font file  Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Generic Mouse: always reports core events
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
	No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) XINPUT: Adding extended input device "Configured Mouse" (type:
MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type:
Other)
Could not init font path element unix/:7100, removing from list!
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
              vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5




Reply to: