Re: Problema con memory stick
Ora funziona, ho inserito delle cosette nel kernel (scsi) riesco a montarlo
e a vedere le cose che ci soo dentro, pero' nn riesco a copiarci le cose.
Se copio un file, tutto ok pero' quando la smonto, la scollego e pi la ricollego
e la monto nn rimane il file che precedentemente avevo copiato. Non credo
che sia problema dei diritti della directory. Monto il dispositivo così
nel fstab
/dev/sda1 /mnt/memory auto noauto,user 0 0
vi invio anche una parte di dmesg dopo che ho inserito la memory
uhci.c: root-hub INT complete: port1: 80 port2: 93 data: 4
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: kmalloc IF c7f56840, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: SigmaTel, Inc.
Product: USBMSC Audio Player
SerialNumber: 012345678901
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x66f/0x8000) is not claimed by any active
driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 066f:8000
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 0.01
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 100mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 04 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 2
usb.c: kusbd policy returned 0xfffffffe
Adding Swap: 88352k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: SigmaTel Model: MSCN Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface c7f56840
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: Write Protect is off
sda: sda1
>Alle 20:08, mercoledì 30 luglio 2003, tavolate@tin.it ha scritto:
>> Non funziona, pero' il supporto per usb c'è visto che uso una tastiera
>usb
>> e con usbview vedo le caratteristiche della memory stick (che è anche
un
>> lettore mp3).
>> AIUTATEMI, sarà mica la storia del lettore che pone problema? Mi sembra
>> strano perchè sotto winzoz funziona correttamente, sia come lettore mp3
>> che memory stick.
>>
>[CUT]
>
>cosa dice
>$ dmesg
>???
>
>MaXeR
>
>
>--
>To UNSUBSCRIBE, email to debian-italian-request@lists.debian.org
>with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: