Re: Adsl -tin.it
ho ricompilato il kernel con "ppp" ma senza "ppp over ethernet";
riporto esattamente quanto fatto con pppoeconf:
debian:~# pppoeconf
I found 1 ethernet device(s):
eth0
Are all your ethernet interfaces listed above?
(If No, modconf will be started so you can load the
card drivers manually).
---> yes
Looking for PPPoE Access ?
Concentrator on eth0...
If you continue with this program, the configuration file
/etc/ppp/peers/dsl-provider will be modified. Please make sure
that you have a backup copy before saying Yes.
Continue with configuration?
---> yes
Most people using popular dialup providers prefer the options
'noauth' and 'defaultroute' in their configuration and remove the
'nodetach' option. Further, for busy providers the
lcp-echo-interval could be increased. Should I check your
configuration file and change these settings where neccessary?
---> yes
Please enter the username which you usually need for
the PPP login to your provider in the input box below.
If you wish to see the help screen, delete the username
and press OK.
---> "........"
Please enter the password which you usually need for
the PPP login to your provider in the input box below.
NOTE: you can see the password in plain text while
typing.
---> "........"
You need at least one DNS IP addresses to resolve the
normal host names. Normally your provider sends you
addresses of useable servers when the connection is
established. Would you like to add these addresses
automaticaly to the list on nameservers in your local
/etc/resolv.conf file? (recommended)
---> yes
Many providers have routers that do not support IP packets with
MSS more than 1500. Normal packets outgoing from this machine
have this MSS size. Unfortunately if you are forwarding packets
from another hosts (ie. doing masquerading) the MSS may become
increased depending on the paket size and the route to the client
host. So your client machines won't be able to connect to some
sites. There is a solution: the maximum MSS can be limited by
pppoe. You can find more details about this issue in pppoe
documentation.
Should pppoe clamp MSS at 1452 bytes
If unsure, say yes.
(If you still get problems described above, try setting to 1412
in the dsl-provider file.)
---> yes
Your PPPD is configured now. Would you like to start
the connection at boot time?
---> no
Now, you can make an DSL connection with "pon
dsl-provider" and terminate it with "poff". Would you
like to start the connection now?
---> yes
Every 2s: /sbin/ifconfig ppp0
pp0: error fetching interface information: Device not found
.....
.....(ripetuto più volte)
Ctrl-c
e questo è quanto riportato sul terminale da pppoeconf:
pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1452"
...cosa può essere sbagliato?
Reply to: