Re: A proposito di MBR...
Il giorno Mon, 9 Sep 2002 15:28:12 +0200, Francesco P. Lovergine ha
scritto:
> > dd if=/dev/zero of=/dev/hda bs=512 count=1
> >
> > Quindi ciao ciao alla tabella... come faccio a recuperarla?!?
ok, ecco i log di gpart:
--------------------------------------------------
gpart -l gpart.hdd.log /dev/hdd
Begin scan...
Possible partition(Windows NT/W2K FS), size(4337mb), offset(0mb)
Possible partition(DOS FAT), size(9985mb), offset(4337mb)
* Warning: short read near sector(29336643), 64512 bytes instead of
66048. Skipping... End scan.
Checking partitions...
Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary
Partition(DOS or Windows 95 with 32 bit FAT): primary
Ok.
Guessed primary partition table:
Primary partition(1)
type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX)
size: 4337mb #s(8883880) s(63-8883942)
chs: (0/1/1)-(1023/15/63)d (0/1/1)-(8813/6/61)r
Primary partition(2)
type: 011(0x0B)(DOS or Windows 95 with 32 bit FAT)
size: 9985mb #s(20450682) s(8884008-29334689)
chs: (1023/15/63)-(1023/15/63)d (8813/8/1)-(29101/13/63)r
Primary partition(3)
type: 000(0x00)(unused)
size: 0mb #s(0) s(0-0)
chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r
Primary partition(4)
type: 000(0x00)(unused)
size: 0mb #s(0) s(0-0)
chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r
---------------------------------------------
ok, 1 partizione primaria ntfs ed un'altra primaria(?!?) su fat32.
ecco l'altro hd:
------------------------------------
gpart -l gpart.hde.log /dev/hde
Begin scan...
Possible partition(DOS FAT), size(7240mb), offset(0mb)
Possible partition(DOS FAT), size(49999mb), offset(7240mb)
* Warning: short read near sector(117231219), 64512 bytes instead of
66048. Skipping... End scan.
Checking partitions...
Partition(DOS or Windows 95 with 32 bit FAT): primary
Partition(DOS or Windows 95 with 32 bit FAT): primary
Ok.
Guessed primary partition table:
Primary partition(1)
type: 011(0x0B)(DOS or Windows 95 with 32 bit FAT)
size: 7240mb #s(14827932) s(63-14827994)
chs: (0/1/1)-(1023/15/63)d (0/1/1)-(14710/4/63)r
Primary partition(2)
type: 011(0x0B)(DOS or Windows 95 with 32 bit FAT)
size: 49999mb #s(102398247) s(14828058-117226304)
chs: (1023/15/63)-(1023/15/63)d (14710/6/1)-(116295/14/63)r
Primary partition(3)
type: 000(0x00)(unused)
size: 0mb #s(0) s(0-0)
chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r
Primary partition(4)
type: 000(0x00)(unused)
size: 0mb #s(0) s(0-0)
chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r
---------------------------------------------
ok, 2 partizioni fat32, la prima primaria e anche la seconda(?!?)
ora, dando per scontato che gpart abbia "letto bene", come devo muovermi
per non fare ulteriori casini?!?
Grazie e ciao
InSa
--
----------------------------------------
System powered by Debian GNU/Linux Sarge
Kernel 2.4.18 on a Laptop
----------------------------------------
Reply to: