[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Dvd e pinguini (lunga)



On Mon, 24 Jun 2002 10:21:26 +0200
<insa_hc@katamail.com> wrote:

> Salve a tutti,
> 
> ho svariati problemi derivanti dal fatto che vorrei vedere i dvd a schermo intero sotto il pinguino. Il mio computer è un portatile compaq 1800 xl 186 con processore pentium III 600 128 ram scheda video ati rage mobility 8M , utilizzo debian woody con xfree 4.1 . Ho provato queste soluzioni:
> 
> 1- Mplayer funziona ma se provo a schermo intero (-vop scale=1024:768) il inizia a "saltare" sia l'audio che il video, inoltre il programma non supporta molto bene i menù.
> 2- Ogle supporta bene i menù ma sia l'audio che il video "saltano" durante la normale riporduzione.
> 

non hai provato xine, a mio parere il migliore tra i video players, lo trovi nella distribuzione

> [...]
> 
> startx >&X.log
> 
> XFree86 Version 3.3.6a / X Window System
                  ^^^^^^^^ non e' il 4.1

credo che il tuo problema sia principalmente questo...

quindi installa correttamente X, prova xine e vedrai che piacere!

-- mattia


> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: xx November 2000
> 	If the server is older than 6-12 months, or if your card is newer
> 	than the above date, look for a newer version before reporting
> 	problems.  (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.4.13 i686 [ELF] 
>                                   ^^^^^^^^ ma il mio kernel è 2.4.17...
> 
> Configured drivers:
>   Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 1)
> (using VT number 7)
> 
> XF86Config: /etc/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> glx: Unknown error loading module
> dri: Unknown error loading module
> dbe: Unknown error loading module
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "it"
> (**) Mouse: type: MouseManPlusPS/2, device: /dev/psaux, buttons: 5
> (**) Mouse: zaxismapping: (-)4 (+)5
> (**) Mach64: Graphics device ID: "Primary Card"
> (**) Mach64: Monitor ID: "Primary Monitor"
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi"
> (--) Mach64: PCI: Mach64 Rage Mobility rev 100, Aperture @ 0xf5000000, Registers @ 0xf4200000, Block I/O @ 0x9000
> (--) Mach64: Card type: AGP
> (--) Mach64: Memory type: SDRAM (4)
> (--) Mach64: 1024x768 panel (ID 6) detected;  clock 65.14 MHz
> (--) Mach64: Clock type: Internal
> (--) Mach64: Maximum allowed dot-clock: 230.000 MHz
> (**) Mach64: Mode "1024x768": mode clock =  65.000
> (--) Mach64: Virtual resolution: 1024x768
> (**) Mach64: Video RAM: 8192k
> (--) Mach64: Using hardware cursor
> (--) Mach64: Using 16 MB aperture @ 0xf5000000
> (--) Mach64: Using 4 KB register aperture @ 0xf4200000
> (--) Mach64: Ramdac is Internal
> (--) Mach64: Ramdac speed: 230 MHz
> (**) Mach64: Color weight: 565
> (--) Mach64: Pixmap cache: 2 256x256 slots, 8 128x128 slots, 32 64x64 slots
> (--) Mach64: Font cache: 16 fonts
> 
> Qualche suggerimento?!?
> Grazie e ciao
> InSa
> 
> 
> --
> ----------------------------------------
> System powered by Debian GNU/Linux Woody
> Kernel 2.4.17 on a Laptop
> ----------------------------------------
> 
> 
> __________________________________________
> 
> 
> Fai i tuoi acquisti su www.kwshopping.it
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-italian-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> 
> 


-- 
To UNSUBSCRIBE, email to debian-italian-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: