[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ssh hangs

randall wrote:
hi all,

i have some server installed the other day, i did not do the install myself and due to some language barriers it was kind of messy (my chinese is not that well so we're testing an easy procedure to do this) it was a simple minimal net install with an openssh-server, initially it went well and i could log in without a problem. the server was behind a DHCP routerand i installed the Etch amd64 Vserver-Kernel from the repo.

then it was time for reboot and i could not login anymore....period.

actually i think it came back up again getting a new ip from the DHCP router, after fixing that problem and port forwarding to the new dynamic IP (and later static IP behind the router and finally static IP on the net) i could not login from remote anymore.

not sure what but it just seems to hang, anybody had this before?

root@ubuntu:~# ssh -vv -p 10064
OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to [] port 10064.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1

OK, reinstalled and still the same problem,
this time connected directley to the net without the router and a static IP on eth3 using a intel 82540em card

i can ping to the static IP from the outside.
i can ping from the box to the net using IP numbers
i can ssh till as far as above.

i can not ping using domain names
i can not download anything with wget
i can not apt-get update with mirror names
i can not apt-get with ip numbers

the network details are as follows


is this correct? most on this network are on DHCP and we are the only one who requested a static so i'm not sure if our ISP has done this correctly, is the netmask correct?

Reply to: