Re: Adaptec AIC-79xx Problems
The machine boots but as soon as we start writing heavily to the
disks...
Jun 28 12:00:53 localhost kernel: scsi0: SCBPTR == 0xff0d, SCB_NEXT
== 0xff00, SCB_NEXT2 == 0x0
Jun 28 12:00:53 localhost kernel: CDB d 1 0 0 0 0
Jun 28 12:00:53 localhost kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Jun 28 12:00:53 localhost kernel: <<<<<<<<<<<<<<<<< Dump Card State
Ends >>>>>>>>>>>>>>>>>>
Jun 28 12:00:53 localhost kernel: DevQ(0:0:0): 0 waiting
Jun 28 12:00:53 localhost kernel: DevQ(0:1:0): 0 waiting
Jun 28 12:00:53 localhost kernel: DevQ(0:2:0): 0 waiting
Jun 28 12:00:53 localhost kernel: DevQ(0:8:0): 0 waiting
Jun 28 12:00:53 localhost kernel: Recovery SCB completes
Jun 28 12:00:53 localhost kernel: scsi0:0:1:0: Cmd aborted from QINFIFO
As for the interrupts:
:~# lspci
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub
(rev 0c)
0000:00:00.1 ff00: Intel Corp. Memory Controller Hub Error Reporting
Register (rev 0c)
0000:00:01.0 System peripheral: Intel Corp. Memory Controller Hub DMA
Controller (rev 0c)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI
Express Port A0 (rev 0c)
0000:00:03.0 PCI bridge: Intel Corp. Memory Controller Hub PCI
Express Port A1 (rev 0c)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI
Express Port B0 (rev 0c)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI
Express Port C0 (rev 0c)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC
Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus
Controller (rev 02)
0000:02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:02:00.1 PIC: Intel Corp. PCI Bridge Hub I/OxAPIC Interrupt
Controller A (rev 09)
0000:02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:02:00.3 PIC: Intel Corp. PCI Bridge Hub I/OxAPIC Interrupt
Controller B (rev 09)
0000:03:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
0000:03:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10)
0000:04:02.0 Ethernet controller: Intel Corp. 82546GB Gigabit
Ethernet Controller (rev 03)
0000:04:02.1 Ethernet controller: Intel Corp. 82546GB Gigabit
Ethernet Controller (rev 03)
0000:07:01.0 VGA compatible controller: ATI Technologies Inc Rage XL
(rev 27)
On 28/06/2006, at 12:37 PM, JJ van Gorkum wrote:
Look at termination, cable length, cable type (did you use LVD cables)
This is all 'out of the box' SuperMicro equipment with cables etc
already in place with a supermicro 8 drive hard disk cage.
Remove all devices, and try to boot the system (to see if you can go
beyond this point...) if it still fails -> look at the setup of the
adapter...
and as last: does the adapter shares it's interrupt with an other
device?
Reply to: