Re: Radius, Cisco 1600 and Windows Clients
I'll try to explain myself...
First of all, no ISDN, or modems or telephone lines...
----- Original Message -----
From: "Jesse Molina" <jesse@opendreams.net>
To: "Agust?n Ciciliani" <agustin@maderonet.net.ar>
Cc: <debian-isp@lists.debian.org>
Sent: Friday, March 11, 2005 4:22 PM
Subject: Re: Radius, Cisco 1600 and Windows Clients
>
> Hmmm...
>
> I'm a little confused. Are you trying to set up L2TP? Your original
> email said "dial in", so I immediately thought of modem dial-in or ISDN
> dial-in, but it seems like you are trying to do something else, like
> tunneling.
>
> Can you clarify Agustin?
>
>
>
> On Fri, Mar 11, 2005 at 03:47:41PM -0300, Agust?n Ciciliani wrote:
> > Dear Jesse,
> >
> > Thank you for your time!
> >
> > Now you say, in fact I have some doubts about the support for ppp in the interfaces...
> >
> > I've asked for a simplified model because I think I am able to figure out how to
implement
> > it in my WAN, but my real WAN looks like this (if this helps...)
> >
> > [LAN] PCs (clients) --------> (ethernet 0) Cisco 1601R (serial 0) ------------>
Aerials
> > cloud ----------> (E1) Cisco 2600 (ehernet 0/0) [6500 VLAN] Radius Server --------->
The
> > 6500 route me to Internet...
> >
> > Agustin
> >
> >
> > ----- Original Message -----
> > From: "Jesse Molina" <jesse@opendreams.net>
> > To: "Agust?n Ciciliani" <agustin@maderonet.net.ar>
> > Cc: <debian-isp@lists.debian.org>
> > Sent: Friday, March 11, 2005 3:12 PM
> > Subject: Re: Radius, Cisco 1600 and Windows Clients
> >
> >
> > >
> > > Hi Agustin
> > >
> > > What kind of interface are you using on that 1601R? An Async serial?
> > > The aux port? ISDN?
> > >
> > > Posting your configuration <minus passwords and such> might be useful
> > > and gives us more info. (use "show tech" if possible)
> > >
> > > Debug aaa commands come in very helpful when you are having real
> > > radius/tacacs problems, but this could be something else, such as your
> > > interface configuration.
> > >
> > >
> > >
> > > On Fri, Mar 11, 2005 at 02:55:50PM -0300, Agust?n Ciciliani wrote:
> > > > Dear List,
> > > >
> > > > I apologize if this issue has been discussed, but I couldn't find any docs that
help
> > me
> > > > out.
> > > >
> > > > I have a network with a cisco 1601R connected to Internet and a radius server
(simply
> > an
> > > > ethernet switch with windows workstations, the router and the server running
> > freeradius).
> > > >
> > > > I'm trying to configure the cisco so clients dial to it, the cisco validate the
user
> > and
> > > > password with the radius, and if everything is ok, it opens the door to that
client
> > for
> > > > accessing Internet.
> > > >
> > > > I've based my freeradius installation reading
http://www.frontios.com/freeradius.html
> > so
> > > > the server is running ok and the tests show me that it's validating as I need. The
> > > > communication between the router and the server is also ok.
> > > >
> > > > The big problem is between the NAS and the clients. I read almost everything I've
> > found in
> > > > cisco about VTI, VPDN, PPP, AAA and RADIUS, but I cannot make it work...
> > > >
> > > > Besides I'm no sure about what kind of windows client I should use (pppoe as an
ADSL
> > > > connection or VPN with the ip of the router to dial-in).
> > > >
> > > > I'll appreciatte any comment, or perhaps you know a good howto or something that I
> > could
> > > > read.
> > > >
> > > > THANKS IN ADVANCE!!!
> > > >
> > > > Sincerely,
> > > >
> > > > Agust?n
> > > >
> > > >
> > > > --
> > > > To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
> > > > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> > > >
> > >
> > > --
> > > # Jesse Molina
> > > # Mail = jesse@opendreams.net
> > > # Page = page-jesse@opendreams.net
> > > # Cell = 1.602.323.7608
> > > # Web = http://www.opendreams.net/jesse/
> > >
> > >
> > >
> > >
> > > --
> > > To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
> > > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> > >
> > >
> > >
>
>
>
> --
> # Jesse Molina
> # Mail = jesse@opendreams.net
> # Page = page-jesse@opendreams.net
> # Cell = 1.602.323.7608
> # Web = http://www.opendreams.net/jesse/
>
>
>
>
Reply to: