Re: Radius, Cisco 1600 and Windows Clients
Hi Agustin
What kind of interface are you using on that 1601R? An Async serial?
The aux port? ISDN?
Posting your configuration <minus passwords and such> might be useful
and gives us more info. (use "show tech" if possible)
Debug aaa commands come in very helpful when you are having real
radius/tacacs problems, but this could be something else, such as your
interface configuration.
On Fri, Mar 11, 2005 at 02:55:50PM -0300, Agust?n Ciciliani wrote:
> Dear List,
>
> I apologize if this issue has been discussed, but I couldn't find any docs that help me
> out.
>
> I have a network with a cisco 1601R connected to Internet and a radius server (simply an
> ethernet switch with windows workstations, the router and the server running freeradius).
>
> I'm trying to configure the cisco so clients dial to it, the cisco validate the user and
> password with the radius, and if everything is ok, it opens the door to that client for
> accessing Internet.
>
> I've based my freeradius installation reading http://www.frontios.com/freeradius.html so
> the server is running ok and the tests show me that it's validating as I need. The
> communication between the router and the server is also ok.
>
> The big problem is between the NAS and the clients. I read almost everything I've found in
> cisco about VTI, VPDN, PPP, AAA and RADIUS, but I cannot make it work...
>
> Besides I'm no sure about what kind of windows client I should use (pppoe as an ADSL
> connection or VPN with the ip of the router to dial-in).
>
> I'll appreciatte any comment, or perhaps you know a good howto or something that I could
> read.
>
> THANKS IN ADVANCE!!!
>
> Sincerely,
>
> Agust?n
>
>
> --
> To UNSUBSCRIBE, email to debian-isp-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
# Jesse Molina
# Mail = jesse@opendreams.net
# Page = page-jesse@opendreams.net
# Cell = 1.602.323.7608
# Web = http://www.opendreams.net/jesse/
Reply to: