[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Initramfs image triggers a segmentation fault at startup


Is there currently a problem with initramfs image? The generated initramfs image
(by the debian-installer or during kernel image update) triggers a segmentation
fault on my hp workstation zx6000 at startup and I'm left in a BusyBox
environment (complete trace recorded on a serial console at the end of this
post). This is with up-to-date Debian Etch. As a workaround, I must create an
initrd image either using mkinitrd from the initrd-tools package or using
mkinitrd.yaird from the yaird package.



ELILO boot: Linux
Uncompressing Linux... done
Loading file \EFI\debian\initrd.img...done
Linux version 2.6.15-1-mckinley-smp (Debian 2.6.15-7) (waldi@debian.org) (gcc ve
rsion 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 SMP Wed Feb 22 16:20:54 C
ST 2006
EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP
booting generic kernel on platform hpzx1
PCDP: v0 at 0x3fb2c000
Explicit "console="; ignoring PCDP
Initial ramdisk at: 0xe0000040fe72c000 (8819836 bytes)
SAL 3.1: HP version 2.31
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xff
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
2 CPUs available, 2 CPUs total
MCA related initialization done
Virtual mem_map starts at 0xa0007fffc7200000
Built 1 zonelists
Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/vmlinuz root=/dev/sda2 ro cons
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Memory: 6217472k/6248192k available (4579k code, 46464k reserved, 1943k data, 33
6k init)
McKinley Errata 9 workaround not needed; disabling it
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
Mount-cache hash table entries: 1024
Boot processor id 0x0/0x0
CPU 1: synchronized ITC with CPU 0 (last diff -20 cycles, maxerr 580 cycles)
Brought up 2 CPUs
Total of 2 processors activated (3891.20 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 8608kB freed
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Root Bridge [PCI1] (0000:20)
ACPI: PCI Root Bridge [PCI2] (0000:40)
ACPI: PCI Root Bridge [PCI3] (0000:60)
ACPI: PCI Root Bridge [PCI4] (0000:80)
ACPI: PCI Root Bridge [PCI6] (0000:c0)
IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart
IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1141673603.032:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
EFI Time Services Driver v0.4
i8042.c: No controller found.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
GSI 34 (edge, high) -> CPU 0 (0x0000) vector 49
serial8250: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
GSI 35 (edge, high) -> CPU 1 (0x0100) vector 50
serial8250: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 7, 2097152 bytes)
TCP established hash table entries: 1048576 (order: 10, 16777216 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 336kB freed
Loading, please wait...
Begin: Loading essential drivers... ...
Begin: Running /ACPI: Thermal Zone [THM0] (27 C)
scripts/init-premount ...
eval: 1: array_udev-helper=udev: not found
eval: 1: array_udev-helper=: not found
usbcore: registered new driver usbfs
usbcore: registered new driver hub
tg3.c:v3.47 (Dec 28, 2005)
GSI 29 (level, low) -> CPU 0 (0x0000) vector 51
ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 51
eth0: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1
000BaseT Ethernet 00:30:6e:4a:d2:bd
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[76ff2d0f]
SCSI subsystem initialized
GSI 16 (level, low) -> CPU 1 (0x0100) vector 52
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 52
ohci_hcd 0000:00:01.0: OHCI Host Controller
ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:01.0: irq 52, io mem 0x80023000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Fusion MPT base driver 3.03.04
Copyright (c) 1999-2005 LSI Logic Corporation
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Fusion MPT SPI Host driver 3.03.04
GSI 17 (level, low) -> CPU 0 (0x0000) vector 53
ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 53
ohci_hcd 0000:00:01.1: OHCI Host Controller
ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:01.1: irq 53, io mem 0x80022000
usb 1-1: new low speed USB device using ohci_hcd and address 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 (level, low) -> CPU 1 (0x0100) vector 54
ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 54
ehci_hcd 0000:00:01.2: EHCI Host Controller
ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:01.2: irq 54, io mem 0x80021000
ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usbcore: registered new driver hiddev
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
GSI 20 (level, low) -> CPU 0 (0x0000) vector 55
ACPI: PCI Interrupt 0000:00:03.0[A] -> <6>CMD649: IDE controller at PCI slot 000
GSI 21 (level, low) -> CPU 1 (0x0100) vector 56
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 56
CMD649: chipset revision 2
CMD649: 100% native mode on irq 56
    ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio
hda: DV-28E-B, ATAPI CD/DVD-ROM drive
GSI 20 (level, low) -> IRQ 55
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
e100: eth1: e100_probe: addr 0x80020000, irq 55, MAC addr 00:30:6E:4A:D3:AB
usb 1-1: USB disconnect, address 2
ide0 at 0xd58-0xd5f,0xd66 on irq 56
usb 1-1: new low speed USB device using ohci_hcd and address 3
GSI 27 (level, low) -> CPU 0 (0x0000) vector 57
ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 57
mptbase: Initiating ioc0 bringup
input: Microsoft Microsoft Wheel Mouse Optical® as /class/input/input0
input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-000
ioc0: 53C1030: Capabilities={Initiator,Target}
usb 2-1: new low speed USB device using ohci_hcd and address 3
input: CHICONY HP Basic USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:01.
usb 2-2: new full speed USB device using ohci_hcd and address 4
scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=57
  Vendor: HP 73.4G  Model: ST373453LC        Rev: HPC7
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: HP 73.4G  Model: ST3<6>hub 2-2:1.0: USB hub found
7<6>hub 2-2:1.0: 3 ports detected
3453LC        Rev: HPC7
  Type:   Direct-Access                      ANSI SCSI revision: 03
GSI 28 (level, low) -> CPU 1 (0x0100) vector 58
ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 58
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=58
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write through
 sdb: sdb1 sdb2
sd 0:0:1:0: Attached scsi disk sdb
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Segmentation fault
Begin: Running /scripts/local-premount ...
Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b] [-o <modname>] <m
odname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
Cannot read /etc/fstab: No such file or directory
Begin: Running /scripts/log-bottom ...
Begin: Running /scripts/init-bottom ...
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
mount: Mounting /sys on /root/sys failed: No such file or directory
mount: Mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init

BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
/ #

Reply to: