Re: 2.6.x won't boot on PowerEdge 3250
On Friday 25 March 2005 3:39 pm, Peter Hessler wrote:
> : Hook up a serial console to ttyS0 and boot with
> : "console=uart,io,0x3f8". That console should work
> : very early and the output might give you a clue.
> : ("console=uart" won't work on 2.4 kernels; it went
> : into 2.6.10, IIRC.)
> Ok, I just figured out that whole 'console' thing needs to be in an append=""
> line. Zero output to the serial console.
Can you verify with 2.4 that all the cables are connected
correctly, the baud rate is correct, etc?
Reply to: