Is Broadcom BCM4401-B0 supported?
Good evening,
I have installed GNU/Hurd on another laptop and I'm struggling to get the
network to work.
When doing ifup /dev/eth0 (for a dhcp setup) I'm getting:
fsysopts: /servers/socket/2: -i /dev/eth0 -a 0.0.0.0 -m 255.0.0.0: (ipc/mig) server died
Error getting interfaces; Translator died
Can't get list of interfaces.
I attach the output of settrans -fga /dev/netdde /hurd/netdde
lspci identifies the card as
02:0e.0 Ethernet controller: Broadcom Inc. and subsidiaries BCM4401-B0 100Base-TX (rev 02)
and lspci -n
02:0e.0 0200: 14e4:170c (rev 02)
The package versions are those of the latest installer images which are from
February:
hurd 1:0.9.git20201127-5
netdde 0.0.20200330-6
gnumach 2:1.8+git20201129-4
Is this ethernet card supported?
Regards,
João
Initialized DDELinux 2.6
Initializing skb subsystem
Softirq daemon starting
Initializing DDE page cache
<6>Calibrating delay using timer specific routine.. 3470.48 BogoMIPS (lpj=17352437)
<6>net_namespace: 636 bytes
searching for dev #0<7>pci 0000:00:02.0: reg 10 32bit mmio: 0x13db8b4R
<7>pci 0000:00:02.0: reg 14 io port: 0x13db8d0R
<7>pci 0000:00:02.0: reg 18 32bit mmio: 0x13db8ecR
<7>pci 0000:00:02.0: reg 1c 32bit mmio: 0x13db908R
<7>pci 0000:00:02.1: reg 10 32bit mmio: 0x13db474R
<7>pci 0000:00:1d.0: reg 20 io port: 0x13db0a4R
<7>pci 0000:00:1d.1: reg 20 io port: 0x13dac64R
<7>pci 0000:00:1d.2: reg 20 io port: 0x13da824R
<7>pci 0000:00:1d.3: reg 20 io port: 0x13da3e4R
<7>pci 0000:00:1d.7: reg 10 32bit mmio: 0x13d9f34R
<6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1d.7: PME# disabled
searching for dev #1searching for dev #2searching for dev #3searching for dev #4searching for dev #5searching for dev #6searching for dev #7searching for dev #8searching for dev #9<7>pci 0000:02:04.0: reg 10 32bit mmio: 0x13d96b4R
<6>pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:02:04.0: PME# disabled
<7>pci 0000:02:06.0: reg 10 32bit mmio: 0x13d9274R
<7>pci 0000:02:06.0: supports D1 D2
<6>pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:06.0: PME# disabled
<7>pci 0000:02:06.2: reg 10 32bit mmio: 0x13d8e34R
<7>pci 0000:02:06.2: reg 14 32bit mmio: 0x13d8e50R
<7>pci 0000:02:06.2: supports D1 D2
<6>pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
<6>pci 0000:02:06.2: PME# disabled
<7>pci 0000:02:0e.0: reg 10 32bit mmio: 0x13d89f4R
<7>pci 0000:02:0e.0: supports D1 D2
<6>pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:02:0e.0: PME# disabled
searching for dev #10searching for dev #11searching for dev #12searching for dev #13searching for dev #14searching for dev #15searching for dev #16searching for dev #17searching for dev #18searching for dev #19searching for dev #20searching for dev #21searching for dev #22IO: name: 3c509-control, start: 110, len: 1
<6>Atheros(R) L2 Ethernet Driver - version 2.2.3
<6>Copyright (c) 2007 Atheros Corporation.
IO: name: de600, start: 378, len: 3
<6>eth%d: D-Link DE-600 pocket adapter: not at I/O 0x378.
IO: name: depca, start: 300, len: 16
IO: name: depca, start: 200, len: 16
<6>e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
<6>e100: Copyright(c) 1999-2006 Intel Corporation
<6>Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
<6>Copyright (c) 1999-2006 Intel Corporation.
<6>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
<6>e1000e: Copyright (c) 1999-2008 Intel Corporation.
<6>Intel(R) Virtual Function Network Driver - version 1.0.0-k0
<6>Copyright (c) 2009 Intel Corporation.
<6>Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
<6>Copyright (c) 1999-2008 Intel Corporation.
<6>jme: JMicron JMC2XX ethernet driver version 1.0.5
IO: name: lp486e, start: cb0, len: 16
eth%d: i82596 initialization timed out
<6>NetXen Network Driver version 4.0.50
<6>ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
<6>pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
<6>sky2 driver version 1.25
<6>tehuti: Tehuti Networks(R) Network Driver, 7.29.3
<6>tehuti: Options: hw_csum
<6>ThunderLAN driver v1.15a
<6>TLAN: 0 devices installed, PCI: 0 EISA: 0
<6>uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
<6>winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
<6>VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI
a physical address 0xf0000 doesn't exist.
a physical address 0x100000 doesn't exist.
a physical address 0x100000 doesn't exist.
l4dde26_register_rx_callback: [36mNew rx callback @ 0x103f630.[0m
search device eth0
there is device dummy0, base addr: 0
after search_netdev: cannot find eth0
Reply to: