[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Booting The Debian GNU/Hurd get locked

Philip Charles wrote:

On Thu, 20 Jan 2005, Yuval Tanny wrote:

No. I didn't run it at all. The guide say: "Once you are presented with
a shell prompt, and any time that the Hurd is in single user mode, it is
necessary to set the terminal type:". I hadn't presented with a shell
prompt in the GNU/Hurd system, yet. Should I chroot to in and run it

You will need to boot into your Hurd system to run ./native-install.  This
needs to be done twice.


That's my problem. I can't boot into the Hurd system.

My grub have this:

title GNU (kernel GNUmach 1.3)
 root (hd0,0)
 kernel /boot/gnumach.gz root=device:hd0s1 -s
 module /hurd/ext2fs.static                           \
      --multiboot-command-line=${kernel-command-line} \
      --host-priv-port=${host-port}                   \
      --device-master-port=${device-port}             \
      --exec-server-task=${exec-task}                 \
      -T typed ${root} $(task-create) $(task-resume)
 module /lib/ld.so.1 /hurd/exec $(exec-task=task-create)

When I'm trying to boot, the system crash (not responding). the last thing from the boot process is this message:

ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14

ide1 at 0x170-0x177, 0x3f6 on irq 15


FDC is a post 1991 82077

Failed initialization of WD-7000 SCSI card!

EATAO, address 0x1f0 in use skipping probe.

EATAO, address 0x170 in use skipping probe.

ppa: Version 1.42

ppa: Probing port 03bc

ppa: Probing port 0378

...(and some other lines from ppa)..

scsi: 0 hosts.

scsi: detected total.

rtl8139.c:B1.23a ...


eth0: RealTek RTL81396 Fast Ethernet at 0xa00 IRQ 10, 0:e0:ud: 7:98:ca



Reply to: