real strange

[hong jun <hj_182002@yahoo.ca>]

hi:
   thank you for your help. and i get the boot message by the way you
said:
$cat /dev/klog >boot.log

here is the output:
GNUmach 1.2
AT386 boot: physical memory from 0x0 to 0x3f00000
GNUmach 1.2
AT386 boot: physical memory from 0x0 to 0x3f00000
pcibios_init : BIOS32 Service Directory structure at 0x000fac30
pcibios_init : BIOS32 Service Directory entry at 0xfb0a0
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb0d0
Probing PCI hardware.
hd0: ST320413A, 19092MB w/1024kB Cache, CHS=2434/255/63
hd3: SAMSUNG CD-ROM SC-148T, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa:     SPP port present
ppa:     PS/2 bidirectional port present
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
3c59x.c:v0.99L 5/28/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
0 3c515 cards found.
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
 hd0: hd0s1 hd0s2 < hd0s5 hd0s6 hd0s7 hd0s8 hd0s9 hd0s10 >
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2)

module 0: (hd0,9)/hurd/ext2fs.static
--multiboot-command-line=${kernel-command-line}
--host-priv-port=${host-port} --device-master-port=${device-port}
--exec-server-task=${exec-task} -T typed ${root} $(task-create)
$(task-resume) 
module 1: (hd0,9)/lib/ld.so.1 /hurd/exec
$(exec-task=task-create)                                                                                                                                                                     
2 multiboot modules                                                                                                                                                                                                                             task loaded: (hd0,9)/hurd/ext2fs.static --multiboot-command-line=(hd0,9)/boot/gnumach.gz root=device:hd0s10 -s --host-priv-port=2 --device-master-port=3 --exec-server-task=4 -T typed device:hd0s10
task loaded: (hd0,9)/lib/ld.so.1 /hurd/exec

start (hd0,9)/hurd/ext2fs.static: hd02: bad access: block=28, count=2,
blockend=30, nr_sects2
end_request: I/O error, dev 03:02, sector 28

question 1: i downloaded the gnu-latest.tar.gz from ftp:alpha.gnu.org as
installation doc recommanded ,but it seems the version is gnumach1.2 not
1.3 as you say ,why?

question 2: i has D-Link DFE530 not 3cxxx ,and whatever it detected is
uncorrect. why? is this the reason ican't settrans the pfinet?
when i typed:
$settrans -fgap /servers/socket/2 /hurd/pfinet -i eth0 -a "myip" -g
"gateway" -m "mask"
it tells me:
/hurd/pfinet:eth0:(os/devices) no such device.
settrans:/hurd/pfinet:Translator died.

question 3:when i typed:
$df -m
it tells me :
df:cannot read table of mounted filesystems:No such file or directory
and this the /etc/fstab:
# /etc/fstab: static file system information
#
# <file system>	<mountpoint>	<type>	<options>		<dump>	<pass>
/dev/hd0s10	/		ext2	rw			1	1
/dev/hd0s7      swap            swap    defaults                0      0

question 4:how to edit the file /etc/fstab so i can mount cdrom?

please help me .