Re: kernel 2.6.32-5-parisc64 doesn't boot
On Wed, Jun 23, 2010 at 05:47:35PM +1200, Michal Ludvig wrote:
> Hi all,
>
> After recent dist-upgrade in Squeeze my HP9000 RP3410 no longer boots. I
> can still boot the previous linux-image 2.6.32-3-parisc64 but the new
> 2.6.32-5-parisc64 never finished booting.
I just want to confirm that 2.6.34-rc6 booted on my rp3410 (ioz).
> It looks like it reboots
> during USB enumeration or somewhere there:
In order to track this down, I need to know how to reproduce it.
Do you have an USB devices attached? If so, which ones?
I'm wondering if USB is a red herring and something else changed.
thanks,
grant
>
> ------------------------------------
>
> Booting...
> Boot IO Dependent Code (IODC) revision 1
>
>
> HARD Booted.
> palo ipl 1.14 root@penalosa Wed Oct 8 15:04:37 UTC 2008
> Skipping extended partition 6 - beyond reach of IPL
>
> Partition Start(MB) End(MB) Id Type
> 1 1 31 f0 Palo
> 2 32 156 83 ext2
> 5 157 33408 83 ext2
>
> PALO(F0) partition contains:
> 0/vmlinux64 6833698 bytes @ 0x48000
>
>
> Command line for kernel: 'root=/dev/sdb5 HOME=/ console=ttyS1
> palo_kernel=2/vmlinux'
> Selected kernel: /vmlinux from partition 2
> Selected ramdisk: /initrd.img from partition 2
> ELF64 executable
> Entry 00100000 first 00100000 n 2
> Segment 0 load 00100000 size 4673536 mediaptr 0x1000
> Segment 1 load 005ea730 size 743376 mediaptr 0x476730
> Loading ramdisk 11788317 bytes @ 3f4b0000...
> Branching to kernel entry point 0x00100000. If this is the last
> message you see, you may need to switch your console. This is
> a common symptom -- search the FAQ and mailing list at parisc-linux.org
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.32-5-parisc64 (Debian 2.6.32-15)
> (ben@decadent.org.uk) (gcc version 4.3.5 (GCC) ) #1 Tue Jun 1 12:13:09
> UTC 2010
> [ 0.000000] unwind_init: start = 0x40494000, end = 0x404c1e60,
> entries = 11750
> [ 0.000000] WARNING: Out of order unwind entry! 0000000040495990 and
> 00000000404959a0
> [ 0.000000] WARNING: Out of order unwind entry! 00000000404959a0 and
> 00000000404959b0
> [ 0.000000] FP[0] enabled: Rev 1 Model 20
> [ 0.000000] The 64-bit Kernel has started...
> [ 0.000000] bootconsole [ttyB0] enabled
> [ 0.000000] Initialized PDC Console for debugging.
> [ 0.000000] Determining PDC firmware type: 64 bit PAT.
> [ 0.000000] model 00008860 00000491 00000000 00000002
> 3e3ffb8ecde69d7c 100000f0 00000008 000000b2 000000b2
> [ 0.000000] vers 00000302
> [ 0.000000] CPUID vers 20 rev 5 (0x00000285)
> [ 0.000000] capabilities 0x35
> [ 0.000000] model 9000/800/rp3410
> [ 0.000000] parisc_cache_init: Only equivalent aliasing supported!
> [ 0.000000] Memory Ranges:
> [ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size
> 1024 MB
> [ 0.000000] 1) Start 0x0000004040000000 End 0x00000040ffdfffff Size
> 3070 MB
> [ 0.000000] Total Memory: 4094 MB
> [ 0.000000] initrd: 7f4b0000-7ffee01d
> [ 0.000000] initrd: reserving 3f4b0000-3ffee01d (mem_max ffe00000)
> [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on.
> Total pages: 1033735
> [ 0.000000] Kernel command line: root=/dev/sdb5 HOME=/ console=ttyS1
> palo_kernel=2/vmlinux
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
> [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152
> bytes)
> [ 0.000000] Memory: 4102144k/4192256k available (2996k kernel code,
> 89144k reserved, 1519k data, 272k init)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000
> (1007 MB)
> [ 0.000000] memory : 0x0000000040000000 - 0x000000413fe00000
> (266238 MB)
> [ 0.000000] .init : 0x000000004065c000 - 0x00000000406a0000 (
> 272 kB)
> [ 0.000000] .data : 0x00000000403ed080 - 0x0000000040568de0
> (1519 kB)
> [ 0.000000] .text : 0x0000000040100000 - 0x00000000403ed080
> (2996 kB)
> [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=1, Nodes=8
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:128
> [ 0.000000] Console: colour dummy device 160x64
> [ 0.012000] Calibrating delay loop... 1597.44 BogoMIPS (lpj=3194880)
> [ 0.108000] Security Framework initialized
> [ 0.108000] SELinux: Disabled at boot.
> [ 0.108000] Mount-cache hash table entries: 256
> [ 0.108000] Initializing cgroup subsys ns
> [ 0.108000] Initializing cgroup subsys cpuacct
> [ 0.112000] Initializing cgroup subsys devices
> [ 0.116000] Initializing cgroup subsys freezer
> [ 0.120000] Initializing cgroup subsys net_cls
> [ 0.120000] devtmpfs: initialized
> [ 0.128000] regulator: core version 0.5
> [ 0.128000] NET: Registered protocol family 16
> [ 0.132000] EISA bus registered
> [ 0.136000] Searching for devices...
> [ 0.356000] Found devices:
> [ 0.356000] 1. Storm Peak Slow DC- at 0xfffffffffe780000 [128] { 0,
> 0x0, 0x886, 0x00004 }
> [ 0.356000] 2. Everest Mako Memory at 0xfffffffffed08000 [8] { 1,
> 0x0, 0x0af, 0x00009 }
> [ 0.356000] 3. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12,
> 0x0, 0x880, 0x0000c }
> [ 0.364000] 4. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.372000] 5. Mercury PCI Bridge at 0xfffffffffed22000 [0/1] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.376000] 6. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.384000] 7. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.392000] 8. Mercury PCI Bridge at 0xfffffffffed28000 [0/4] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.392000] 9. Mercury PCI Bridge at 0xfffffffffed2c000 [0/6] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.400000] 10. Mercury PCI Bridge at 0xfffffffffed2e000 [0/7] { 13,
> 0x0, 0x783, 0x0000a }
> [ 0.408000] 11. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15,
> 0x0, 0x004, 0x000c0 }
> [ 0.412000] Enabling PDC_PAT chassis codes support v0.05
> [ 1.268000] CPU(s): 1 x PA8800 (Mako) at 800.024500 MHz
> [ 1.272000] Setting cache flush threshold to 135cec0 (1 CPUs online)
> [ 1.324000] SBA found Pluto 2.3 at 0xfffffffffed00000
> [ 1.384000] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000
> [ 1.420000] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
> [ 1.420000] pci 0000:00:01.0: PME# disabled
> [ 1.420000] pci 0000:00:01.1: PME# supported from D0 D1 D2 D3hot
> [ 1.420000] pci 0000:00:01.1: PME# disabled
> [ 1.432000] pci 0000:00:01.2: PME# supported from D0 D1 D2 D3hot
> [ 1.432000] pci 0000:00:01.2: PME# disabled
> [ 1.448000] Mercury version TR3.2 (0x32) found at 0xfffffffffed22000
> [ 1.484000] pci 0000:20:02.0: PME# supported from D3hot D3cold
> [ 1.488000] pci 0000:20:02.0: PME# disabled
> [ 1.492000] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000
> [ 1.536000] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000
> [ 1.584000] Mercury version TR3.2 (0x32) found at 0xfffffffffed28000
> [ 1.632000] Mercury version TR3.2 (0x32) found at 0xfffffffffed2c000
> [ 1.680000] Mercury version TR3.2 (0x32) found at 0xfffffffffed2e000
> [ 1.720000] LBA: Truncating lmmio_space
> [fffffffff0000000/fffffffffecffffe] to [fffffffff0000000,fffffffffe77ffff]
> [ 1.724000] powersw: Soft power switch support not available.
> [ 1.728000] bio: create slab <bio-0> at 0
> [ 1.728000] vgaarb: device added:
> PCI:0000:e0:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 1.728000] vgaarb: loaded
> [ 1.736000] Switching to clocksource cr16
> [ 1.736000] NET: Registered protocol family 2
> [ 1.736000] IP route cache hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 1.744000] TCP established hash table entries: 262144 (order: 10,
> 4194304 bytes)
> [ 1.756000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 1.760000] TCP: Hash tables configured (established 262144 bind 65536)
> [ 1.760000] TCP reno registered
> [ 1.764000] NET: Registered protocol family 1
> [ 1.788000] Unpacking initramfs...
> [ 2.532000] Freeing initrd memory: 11512k freed
> [ 2.536000] Chassis warnings not supported.
> [ 2.536000] Performance monitoring counters enabled for Storm Peak
> Slow DC-
> [ 2.536000] audit: initializing netlink socket (disabled)
> [ 2.540000] type=2000 audit(1277259537.537:1): initialized
> [ 2.552000] VFS: Disk quotas dquot_6.5.2
> [ 2.552000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 2.560000] msgmni has been set to 8036
> [ 2.560000] alg: No test for stdrng (krng)
> [ 2.560000] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [ 2.564000] io scheduler noop registered
> [ 2.564000] io scheduler anticipatory registered
> [ 2.572000] io scheduler deadline registered
> [ 2.572000] io scheduler cfq registered (default)
> [ 2.584000] PDC Stable Storage facility v0.30
> [ 2.672000] STI GSC/PCI core graphics driver Version 0.9a
> [ 2.676000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 2.684000] 0000:e0:01.0: ttyS0 at MMIO 0xfffffffff4051000 (irq = 74)
> is a 16450
> [ 2.692000] 0000:e0:01.1: ttyS1 at MMIO 0xfffffffff4050000 (irq = 74)
> is a 16550A
> [ 2.692000] console [ttyS1] enabled, bootconsole disabled
> [ 2.692000] console [ttyS1] enabled, bootconsole disabled
> [ 2.696000] 0000:e0:01.1: ttyS2 at MMIO 0xfffffffff4050010 (irq = 74)
> is a 16550A
> [ 2.704000] 0000:e0:01.1: ttyS3 at MMIO 0xfffffffff4050038 (irq = 74)
> is a 16550A
> [ 2.712000] mice: PS/2 mouse device common for all mice
> [ 2.712000] rtc-generic rtc-generic: rtc core: registered rtc-generic
> as rtc0
> [ 2.720000] TCP cubic registered
> [ 2.720000] NET: Registered protocol family 17
> [ 2.724000] registered taskstats version 1
> [ 2.740000] rtc-generic rtc-generic: setting system clock to
> 2010-06-23 02:18:58 UTC (1277259538)
> [ 2.916000] Freeing unused kernel memory: 272k freed
> Loading, please wait...
> [ 3.580000] udev: starting version 157
> [ 4.492000] SCSI subsystem initialized
> [ 4.692000] usbcore: registered new interface driver usbfs
> [ 4.692000] usbcore: registered new interface driver hub
> [ 4.692000] usbcore: registered new device driver usb
> [ 4.940000] tg3.c:v3.102 (September 1, 2009)
> [ 5.016000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 5.044000] ehci_hcd 0000:00:01.2: EHCI Host Controller
> [ 5.064000] ehci_hcd 0000:00:01.2: new USB bus registered, assigned
> bus number 1
> [ 5.088000] ehci_hcd 0000:00:01.2: Enabling legacy PCI PM
> [ 5.112000] ehci_hcd 0000:00:01.2: irq 67, io mem 0xffffffff80000000
> [ 5.128000] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95
> [ 5.128000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 5.128000] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 5.136000] usb usb1: Product: EHCI Host Controller
> [ 5.136000] usb usb1: Manufacturer: Linux 2.6.32-5-parisc64 ehci_hcd
> [ 5.144000] usb usb1: SerialNumber: 0000:00:01.2
> [ 5.196000] usb usb1: configuration #1 chosen from 1 choice
> [ 5.196000] hub 1-0:1.0: USB hub found
> [ 5.196000] hub 1-0:1.0: 5 ports detected
>
>
>
> Firmware Version 46.34
>
> Duplex Console IO Dependent Code (IODC) revision 1
>
>
>
> Firmware Version 46.34
>
> Duplex Console IO Dependent Code (IODC) revision 1
> ------------------------------------------------------------------------------
> (c) Copyright 1995-2004, Hewlett-Packard Company, All rights reserved
> ------------------------------------------------------------------------------
>
> Processor Speed State CoProcessor State Cache Size
> Number State Inst
> Data
> --------- -------- --------------------- -----------------
> ------------
> 0 800 MHz Active Functional
> 33554432 33554432
> 1 800 MHz Stopped:Deconfigured Unknown 0 0
>
> Central Bus Speed (in MHz) : 200
> Available Memory : 4194304 KB
> Good Memory Required : Not initialized. Defaults to 32 MB.
>
> Primary boot path: 0/1/1/0.1
> Alternate boot path: 0/1/1/0.0
> Console path: 0/7/1/1.0
> Keyboard path: 0/0/4/0.0
>
>
> Processor is booting from the first available device.
>
> To discontinue, press any key within 10 seconds.
>
> Boot terminated.
>
> ------------------------------------
>
> It kept trying and failing/rebooting at the same point a couple of times.
>
> Do you need any other information? I'm now back on 2.6.32-3 but am keen
> to run any test kernels.
>
> Michal
>
>
> --
> To UNSUBSCRIBE, email to debian-hppa-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> Archive: http://lists.debian.org/4C219FF7.7030601@logix.net.nz
Reply to: