Sarge d-i rc3 failled to install d380 :-(

To: debian-hppa@lists.debian.org
Subject: Sarge d-i rc3 failled to install d380 :-(
From: "Joel Soete" <jsoe0708@tiscali.be>
Date: Wed, 6 Apr 2005 17:38:47 +0200
Message-id: <[🔎] 4208D515000172CA@mail-5-bnl.tiscali.it>
In-reply-to: <[🔎] 4250DC76.7020100@wanadoo.fr>
Hello all,

I just get an old d380 2-way 256Mb ram (from with I removed a broken remote
management card and duno if supported)

It's a good oportunity to test sarge d-i (netinstall cd) :-)

unfortunately it failled to boot on a well known ramdisk pb:"attempt to access
beyond end of device"
...
LED display at ffd0c000 registered
Wax at 0xffe00000 found.
Wax EISA Adapter found at 0xfc000000
EISA EEPROM: cannot register misc device.
Enumerating EISA bus
EISA: Probing bus 0 at parisc8:20:5
EISA: Mainboard HWPC051 detected.
EISA: Detected 0 cards.
SCSI subsystem initialized
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
STI GSC/PCI core graphics driver Version 0.9a
unwind_init: start = 0x10325720, end = 0x103468a0, entries = 8472
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Soft power switch enabled, polling @ 0xf0140000.
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled
ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
mice: PS/2 mouse device common for all mice
serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc8:16:7
serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc8:16:8
HP SDC: No SDC found.
HP SDC MLC: Registering the System Domain Controller's HIL MLC.
HP SDC MLC: Request for raw HIL ISR hook denied
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 16777216
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 316k freed
Setting up filesystem, please wait ...
attempt to access beyond end of device
ram0: rw=0, want=40650, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=40650, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=32772, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=32772, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
jso@iatst001:/tmp$
jso@iatst001:/tmp$ cp screen-exchange /home/jso/d380-sarge-cdFailure.doc
jso@iatst001:/tmp$ more /home/jso/d380-sarge-cdFailure.doc
LED display at ffd0c000 registered
Wax at 0xffe00000 found.
Wax EISA Adapter found at 0xfc000000
EISA EEPROM: cannot register misc device.
Enumerating EISA bus
EISA: Probing bus 0 at parisc8:20:5
EISA: Mainboard HWPC051 detected.
EISA: Detected 0 cards.
SCSI subsystem initialized
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
STI GSC/PCI core graphics driver Version 0.9a
unwind_init: start = 0x10325720, end = 0x103468a0, entries = 8472
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Soft power switch enabled, polling @ 0xf0140000.
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 25 ports, IRQ sharing enabled
ttyS0 at MMIO 0xffd05800 (irq = 90) is a 16550A
ttyS1 at MMIO 0xffe02800 (irq = 121) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
mice: PS/2 mouse device common for all mice
serio: GSC PS2 keyboard port at 0xffd08000 irq 69 @ parisc8:16:7
serio: GSC PS2 mouse port at 0xffd08100 irq 69 @ parisc8:16:8
HP SDC: No SDC found.
HP SDC MLC: Registering the System Domain Controller's HIL MLC.
HP SDC MLC: Request for raw HIL ISR hook denied
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 16777216
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 316k freed
Setting up filesystem, please wait ...
attempt to access beyond end of device
ram0: rw=0, want=40650, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=40650, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=32772, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=32772, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=33388, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=33420, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=33704, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=33756, limit=32768
cp: attempt to access beyond end of device
Read error: Inpuram0: rw=0, want=33790, limit=32768
t/output error
attempt to access beyond end of device
cp: Read error: ram0: rw=0, want=33798, limit=32768
Input/output errattempt to access beyond end of device
or
cp: Read errram0: rw=0, want=33846, limit=32768
or: Input/outputattempt to access beyond end of device
 error
cp: Readram0: rw=0, want=33864, limit=32768
 error: Input/ouattempt to access beyond end of device
tput error
cp: ram0: rw=0, want=33930, limit=32768
Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=33954, limit=32768
cp: Read error: attempt to access beyond end of device
Input/output errram0: rw=0, want=33986, limit=32768
or
cp: Read errattempt to access beyond end of device
or: Input/outputram0: rw=0, want=34066, limit=32768
 error
cp: Readattempt to access beyond end of device
 error: Input/ouram0: rw=0, want=34084, limit=32768
tput error
cp: attempt to access beyond end of device
Read error: Inpuram0: rw=0, want=34518, limit=32768
t/output error
attempt to access beyond end of device
cp: Read error: ram0: rw=0, want=34542, limit=32768
Input/output errattempt to access beyond end of device
or
cp: Read errram0: rw=0, want=34676, limit=32768
or: Input/outputattempt to access beyond end of device
 error
cp: Readram0: rw=0, want=34696, limit=32768
 error: Input/ouattempt to access beyond end of device
tput error
cp: ram0: rw=0, want=34738, limit=32768
Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=34944, limit=32768
cp: Read error: attempt to access beyond end of device
Input/output errram0: rw=0, want=34944, limit=32768
or
cp: Read errattempt to access beyond end of device
or: Input/outputram0: rw=0, want=34946, limit=32768
 error
attempt to access beyond end of device
ram0: rw=0, want=34946, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=34954, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=35108, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=35344, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35344, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35346, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35346, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35590, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35590, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35592, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35592, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35596, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=35596, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=40300, limit=32768
cp: Read error: Inpuattempt to access beyond end of device
t/output error
ram0: rw=0, want=40302, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=40302, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=40316, limit=32768
cp: attempt to access beyond end of device
Read error: Inpuram0: rw=0, want=40408, limit=32768
t/output error
attempt to access beyond end of device
cp: Read error: ram0: rw=0, want=40410, limit=32768
Input/output errattempt to access beyond end of device
or
ram0: rw=0, want=40410, limit=32768
attempt to access beyond end of device
ram0: rw=0, want=40418, limit=32768
cp: Read error: Input/output error
attempt to access beyond end of device
ram0: rw=0, want=40426, limit=32768
cp: Read error: Input/output error
request_module: runaway loop modprobe net-pf-1
modprobe: FATAL: Could not open '/lib/modules/2.6.8-2-32/kernel/net/unix/unix.ky

modprobe: FATAL: Could not open '/lib/modules/2.6.8-2-32/kernel/net/unix/unix.ky

modprobe: FATAL: Could not open '/lib/modules/2.6.8-2-32/kernel/net/unix/unix.ky
...

Any suggestion how to change lifimage, initrd.img, ... to test more this
install cd.

Thanks,
    Joel

Oth I used a external bootable (unstable debian install) disk and boot  with
a recent kernel 2.6.12-rc2-pa0 :-)
Reply to:
Follow-Ups:
- Re: Sarge d-i rc3 failled to install d380 :-(
  - From: Richard Hirst <rhirst@levanta.com>
References:
- Sarge install pb
  - From: francois leschiera <francois.leschiera@wanadoo.fr>
Prev by Date: Sarge install pb
Next by Date: Re: Sarge d-i rc3 failled to install d380 :-(
Previous by thread: Sarge install pb
Next by thread: Re: Sarge d-i rc3 failled to install d380 :-(
Index(es):
- Date
- Thread