Re: Installing Debian Cdrom Fails console mode.
Hi,
On the PDC you should check that the console path is well set to your
serial port:
- co
- pa con
should give serial......
is you see MONITOR... it is probably the reason why.
NeoNapster wrote:
> Hi I am having a real problem trying to get debian installed on a HP UX
> 9000 785 C360 from the console port as I do not have a monitor for it.
>
> I halt the boot process type sea ipl and then bo p0 I have hunted
> through the mailing list but to no avail they all seem to point to a
> running kernel. I am running minicom from FreeBSD to the console port
> over ssh incase this is a issue.
>
>
>
> Here is the output of my boot process
>
>
>
> Main Menu: Enter command > bo p0
>
> Interact with IPL (Y, N, Q)?> y
>
>
>
> Booting...
> > Boot IO Dependent Code (IODC) revision 153
>
>
>
>
>
> HARD Booted.
>
> palo ipl 0.96 root@palinux Fri Nov 2 16:31:18 MST 2001
>
>
>
> Boot image contains:
>
> 0/vmlinux32 3122078 bytes @ 0xec800
>
> 0/vmlinux64 3990942 bytes @ 0x3e7000
>
> 0/ramdisk 1946807 bytes @ 0x7b5800
>
>
>
> Information: No console specified on kernel command line. This is normal.
>
> PALO will choose the console currently used by firmware (serial).
>
> Current command line:
>
> 0/vmlinux root=/dev/ram initrd=0/ramdisk console=ttyS0 TERM=vt102
>
> 0: 0/vmlinux
>
> 1: root=/dev/ram
>
> 2: initrd=0/ramdisk
>
> 3: console=ttyS0
>
> 4: TERM=vt102
>
>
>
> Edit which field?
>
> (or 'b' to boot with this command line)? B
>
>
>
> Command line for kernel: 'root=/dev/ram console=ttyS0 TERM=vt102'
>
> Selected kernel: /vmlinux from partition 0
>
> Selected ramdisk: /ramdisk from partition 0
>
> Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing
> 32-bit kernel
>
> ELF32 executable
>
> Entry 00100000 first 00100000 n 6
>
> Segment 0 load 00100000 size 1618208 mediaptr 0x1000
>
> Segment 1 load 0028c000 size 287728 mediaptr 0x18d000
>
> Segment 2 load 002d4000 size 379072 mediaptr 0x1d4000
>
> Segment 3 load 00334000 size 8192 mediaptr 0x231000
>
> Segment 4 load 00338000 size 32768 mediaptr 0x233000
>
> Segment 5 load 003750e8 size 83184 mediaptr 0x23b0e8
>
> Loading ramdisk 1946807 bytes @ 1fe14000...
>
> Branching to kernel entry point 0x00100000. If this is the last
>
> message you see, you may need to switch your console. This is
>
> a common symptom -- search the FAQ and mailing list at parisc-linux.org
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.302 / Virus Database: 265.8.5 - Release Date: 03/02/2005
>
>
> ------------------------------------------------------------------------
>
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.302 / Virus Database: 265.8.5 - Release Date: 03/02/2005
Reply to: