Hi,
I need to connect my C360 via AUI-port to another machine. Although I've set
the default port to AUI (boot-admin : lanconfig AUI) and the correct
ip-address (ifconfig
eth0), ping neither complains about beeing not able to reach the network,
nor makes any other output. I guess it uses the TP-port by default.
Any hint how to switch to AUI ?
Ah - btw., is there anyone working on a STI-driver for the PCI-graphicsboards
(FX4/FX6) ?
greetings
Henry Schimmer
--
In a world without walls and fences - who needs windows and gates ?
P.S. : dmesg-output
Linux Tulip driver version 0.9.15-pre6 (July 2,
2001)
tulip0: no phy info, aborting mtable
build
tulip0: MII transceiver #1 config 1000 status 7809 advertising
0061.
eth0: Digital DS21143 Tulip rev 48 at 0xff00, 00:60:B0:C4:96:CC, IRQ 96
STI PCI ROM enabled at 0xf1e00000
PCI graphic ROM found at f1e00000 (2048 kB), fb @ f6000000 (32 MB)
PCI region 0: f6000000 with 32768 kB
PCI region 1: 00000000 with 0 kB
PCI region 2: 00000000 with 0 kB
PCI region 3: 00000000 with 0 kB
PCI region 4: 00000000 with 0 kB
PCI region 5: 00000000 with 0 kB
PCI region 6: f1e00000 with 2048 kB
PCI region 7: 00000000 with 0 kB
PCI region 8: 00000000 with 0 kB
PCI region 9: 00000000 with 0 kB
PCI region 10: 00000000 with 0 kB
PCI region 11: 00000000 with 0 kB
Trying PCI STI ROM at f1e00000, PCI hpa at f6000000
I'm not trying to set up the PCI graphic card now... It would freeze your
machine
Unable to handle STI device 'PCI device 103c:1008 (Hewlett-Packard Company)'
--
To UNSUBSCRIBE, email to debian-hppa-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org