Re: Boot problem
On Tue, Oct 09, 2001 at 07:29:28PM +0200, Albert Strasheim wrote:
> On Tue, 09 Oct 2001, Hamish Moffatt wrote:
> > On Tue, Oct 09, 2001 at 12:41:02AM +0100, Matthew Wilcox wrote:
> > > I don't understand what's going on here. There shouldn't be any
> > > driver that will claim the CAP/MUX card. Can you send me (off-list)
> > > the boot log for your D350, both with & without the card installed?
> > > I'm particularly interested in the device listing at boot time.
> >
> > After the ttyS0 port is initialised, I don't get any more console
> > output on the console port (when the card is installed, that is),
> > so that could be a problem.
>
> Sounds like the swapped serial port problem that got fixed in 2.4.9-pa20
> or thereabouts. You should probably be installing with a lifimage
> containing the latest kernel and Debian boot floppies, IMHO.
I disagree. According to the documentation I have, the D350 has one
serial port on Lasi and another on CAP/MUX. The serial driver should
not be claiming CAP/MUX. If I get a boot log of this machine with the
CAP/MUX card installed, I may be able to figure out what's going on.
--
Revolutions do not require corporate support.
Reply to: