Re: Trouble connecting from Debian Linux to Yaesu FT-450AT using hamlib or kermit
The baud matches. The rig is set at 38400, and I set kermit to use 38400
baud. I've tried all the different parity choices.
Here is what kermit shows for the serial port configuration:
Communications Parameters:
Line: /dev/ttyUSB0, speed: 38400, mode: local, modem: none
Parity: none, stop-bits: (default) (8N1)
Duplex: full, flow: none, handshake: none
Carrier-watch: on, timeout: none, close-on-disconnect: off
Lockfile: /var/lock/LCK..ttyUSB0
Terminal bytesize: 8, escape character: 28 (^\)
Reply to: