Peter wrote:
Hi I'am looking for support to get a TNC3S with 2 modem working With standard kissattach I got modem 1 on the air. In the ax25 how-to I found: If you have a dual port tnc and it is connected to your /dev/ttyS0 serial device at 9600 bps, the command: /usr/sbin/mkiss -s 9600 /dev/ttyS0 /dev/ptyp0 /dev/ptyp1 /usr/sbin/kissattach /dev/ttyp0 port1 /usr/sbin/kissattach /dev/ttyp1 port2 But none of the modem do work Who has a TNC3S running ? peter PC2A
Peter, Are you getting any error messages?Are the port names in axports the same as used in kissattach and do the port speeds match the TNC settings?
Is mkiss available? I've read of it not being available by default. Is kissattach residing in /usr/sbin, or is it in /usr/local/sbin? Is the TNC in KISS mode?I believe the use of an IP number is mandatory in kissattach. Even non-routable numbers will do. I use 10.0.0.1 and 10.0.0.2 for my loopback ports.
Ray vk2tv .