Re: baycom sethdlc No such device (19)
On Thursday 18 December 2003 02:05, Jaye Inabnit ke6sls wrote:
> [Sebastian, sorry for my earlier reply, I must have tapped the reply button
> and not the replylist button. Here is the message, this time sent to the
> list <blush>]
No problem. :-)
>
> I'm back for more punishment :)
>
> Thank you Sebastian. I followed your directions to the letter but I'm
> still getting this error:
> root@benchotesto:~# call w6zzk-1 bcsf0
> axconfig: port bcsf0 not active
> call: no AX.25 port data configured
> root@benchotesto:~#
>
> I'll attach my session log that I made in case it might be useful.
Without a 'cat /etc/ax25/axports' your session log is not very useful.
> Further, I removed the modules and started over again with my call sign
> changed to ke6sls-10 as suggested. This didn't help either :(
The important connection between kernel module and your axports consists in
your ifconfig settings! If you use "ke6sls-10" in your axports for port
"bcsf0" (you can call the port what every you want) you must use the
same callsign in your ifconfig settings ('ifconfig bcsf0 hw ax25 ke6sls-10').
In addition the syntax of call is 'call <port> <callsign>'.
Sebastian
Reply to: