Re: Kantronics KPC3+

[Carlos Barros <cbf@fisica.edu.uy>]

On Fri, Feb 23, 2001 at 10:14:25PM +0200, Tomi Manninen wrote:

> On Fri, 23 Feb 2001, Carlos Barros wrote:
> 
> > insmod mkiss
> > stty -F /dev/ttyS1 speed 1200
> 
> Using stty should be completely unnecessary. Kissattach sets the
> serial port speed itself. Just leave the stty out.
> 
> > kissattach /dev/ttyS1 radio 192.168.1.1
> > 
> > where radio is defined in /etc/ax25/axports :
> > ---
> > radio       CX3ACS-1        1200    255     2       144.675 MHz (1200  bps)
> > ---
> 
> Are you sure the _serial_port_ speed is really 1200 bps? It is a common
> mistake to set the speed to the radio speed and usually that doesn't match
> the serial port speed.

At least I could make it work! TNX

The wrong thing was to do setserial/stty on the serial port, because the
kissattach does not set the port correctly after setserial/stty. In that case
we rebooted the box change axports to 9600 and then it worked.

Thanks to all who helped.

-- 
Carlos Barros and Estela Mary(CX3ACS).