Re: Kantronics KPC3+

[Jaye Inabnit ke6sls <ke6sls@snowcrest.net>]

   Chuck,

I found all three of the kpc3+ here were default to 19.200
terminal rate. Since they are kpc's, they also support the
'autobaud'.

good luck

On Sunday 25 February 2001 00:00, Chuck wrote:
> Carlos Barros wrote:insmod mkiss
>
> > stty -F /dev/ttyS1 speed 1200
> > kissattach /dev/ttyS1 radio 192.168.1.1
> >
> > where radio is defined in /etc/ax25/axports :
> > ---
> > radio       CX3ACS-1        1200    255     2       144.675 MHz (1200 
> > bps) ---
> >
> > No packets were recieved and the tnc didnt trnasmit nothing. Ifconfig
> > shows error in packets received.
> >
> > On the same host, using window$ the hardware works right, so it is not a
> > harware failure.
> >
> > Do you have any hint? Do we miss something?
>
> The default baud rate on the KPC3+ between the TNC and the computer is
> 9600, not 1200, unless you reconfigured in m$.
>
> 73, Chuck Percy
> N7FZ

-- 

Jaye Inabnit, ARS ke6sls     e-mail: ke6sls@arrl.net
707-442-6579 h/m                     707-268-4074
http://www.qsl.net/ke6sls            ICQ# 12741145
This mail composed with kmail on kde on X on linux warped by debian
If it's stupid, but works, it ain't stupid.