Re: Kantronics KPC3+
Carlos Barros wrote:insmod mkiss
> stty -F /dev/ttyS1 speed 1200
> kissattach /dev/ttyS1 radio 192.168.1.1
>
> where radio is defined in /etc/ax25/axports :
> ---
> radio CX3ACS-1 1200 255 2 144.675 MHz (1200 bps)
> ---
>
> No packets were recieved and the tnc didnt trnasmit nothing. Ifconfig shows
> error in packets received.
>
> On the same host, using window$ the hardware works right, so it is not a
> harware failure.
>
> Do you have any hint? Do we miss something?
The default baud rate on the KPC3+ between the TNC and the computer is 9600, not
1200, unless you reconfigured in m$.
73, Chuck Percy
N7FZ
Reply to: