Re: lenny: cannot increase screen resolution
On May 21, 2009, at 3:49 AM, Alexander Rozhkov wrote:
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-111 # horizontal refresh frequencies
VertRefresh 50-160 # vertical refresh frequencies
EndSection
Are those the right values for your monitor's horizontal refresh rate?
Try to use the real values there. Hint: usually they are behind your
monitor on a sticker or you can look them up online.
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RRUseXF86Edid" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "TVMode" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
ATI using radeonhd driver... Interesting. I'd try with ati or even vesa.
Section "Modes"
Identifier "Modes[0]"
# Modeline "1280x1024" 109.62 1280 1336 1472 1720 1024 1024 1026
1062
Modeline "1280x1024" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
EndSection
Get rid of this section altogether (modes).
Now, on the "screen" section, make it just:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1787:0x2244.
If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x9501:0x1787:0x2244: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO at 0xb7ab0000 (size 0x00010000)
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1787 SubsystemID: 0x2244
IOBaseAddress: 0xd000
Filename: SB33901.025
BIOS Bootup Message:
It looks like radeonhd does not like your card.
Reply to: