[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

can't locate net-pf-1



Bonjour a tous.

Bon j'ai intallé la patato il y quelques temps, et lassé d'écouter la radio et de me faire lariser par mes amis sous windaube, je decidé de recompiler pour avoir le son.

Je décompacte les sources puis je fais les clasiques:
make menuconfig
make-kpkg clean
make-kpkg --revision=custom.1.0 kernel-image
dpkg -i ../kernel-image-2.2.17.deb (j'ai pris les sources du 2.2.17)
reboot

Et la des le début cela commence mal: je vois apparaitre des lignes et des lignes de 
modprob: modprob: Can't locate module net-pf-1

ET meme lorsqu'au second essai j'ai mis tout dans le noyau en dure (cad sans modules....).
Je me demande donc où est mon erreur... Et surtout comment faire pour y remedier: j'ai été obligé de revenir a la version orginal du kernel qui a été installée lors de l'installe.

NB: je joins les messages du demarage au cas ou...

Merci de votre aide.

Bruno Durning

PS: j'ai une carte reseau ethernet 10Mbit de realtek (je pense que c'est dans le dmesg...).
Linux version 2.2.17 (herbert@arnor) (gcc version 2.95.2 20000313 (Debian GNU/Linux)) #1 Sun Jun 25 09:24:41 EST 2000
Detected 334103 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 666.83 BogoMIPS
Memory: 94600k/98304k available (1732k kernel code, 416k reserved, 1416k data, 140k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfdb01
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9, DID=5229
PCI_IDE: not 100% native mode: will probe irqs later
PCI_IDE: simplex device:  DMA disabled
ide0: PCI_IDE Bus-Master DMA disabled (BIOS)
PCI_IDE: simplex device:  DMA disabled
ide1: PCI_IDE Bus-Master DMA disabled (BIOS)
hda: ST36531A, ATA DISK drive
hdc: IBM-DTLA-307030, ATA DISK drive
hdd: ATAPI CDROM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63
hdc: IBM-DTLA-307030, 29314MB w/1916kB Cache, CHS=59560/16/63
hdd: ATAPI 36X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: No Microchannel-bus support present -> Aborting.
megaraid: v107 (December 22, 1999)
aec671x_detect: 
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hda: set_multmode: error=0x04 { DriveStatusError }
 hda1 hda2 hda3 hda4 < hda5 hda6 >
 hdc: [PTBL] [3737/255/63] hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
kmod: runaway modprobe loop assumed and stopped
Adding Swap: 184736k swap-space (priority -1)
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

Reply to: