PB son avec Freeamp et Gnome
Bonjour,
Quand je lance Gnome avec le support du son je me retrouve avec des truc bizarres qui sortent des enceintes, et un message d'erreur:
May 16 14:56:29 kahuna kernel: Sound: DMA (output) timed out - IRQ/DRQ config error?
May 16 14:57:15 kahuna last message repeated 10 times
May 16 14:57:20 kahuna last message repeated 4 times
Avec Freeamp le son est nickel, seulement il lit 1 seconde en boucle sans avancer dans le morceau !!
Un 'cat foo.au > /dev/audio' marche sans problème, et mes CDs se lisent aussi sans problème.
J'ai une carte son Neomagic 256av (c un portable). J'utilise le module opl3sa2. J'ai un noyau 2.2.15 sous potato. Voici les modules chargés:
bash-2.03$ lsmod
Module Size Used by
opl3sa2 3888 0
ad1848 15856 0 [opl3sa2]
mpu401 18480 0 [opl3sa2]
sound 55512 0 [opl3sa2 ad1848 mpu401]
soundlow 344 0 [sound]
soundcore 2372 7 [sound]
serial_cs 5376 0 (unused)
ds 6600 2 [serial_cs]
i82365 28516 2
pcmcia_core 44416 0 [serial_cs ds i82365]
$ cat /proc/sound
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux kahuna 2.2.15 #1 lun mai 15 11:10:43 CEST 2000 i586
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: MS Sound System (CS4231) (DUPLEX)
Synth devices:
Midi devices:
0: MPU-401 0.0 Midi interface #1
Timers:
0: System clock
Mixers:
0: OPL3-SAx and AD1848 (through MSS)
1: MS Sound System (CS4231)
Et la config utilisée (extraite de /etc/conf.modules):
alias char-major-14 opl3sa2
pre-install opl3sa2 modprobe "-k" "ad1848"
post-install opl3sa2 modprobe "-k" "opl3"
options opl3sa2 mss_io=0x530 irq=5 dma=0 dma2=1 mpu_io=0x300 io=0x370
options opl3 io=0x388
Un 'modprobe opl3sa2' me donne ceci:
May 16 14:42:35 kahuna kernel: ad1848/cs4248 codec driver Copyright (C) by Hannu
Savolainen 1993-1996
May 16 14:42:35 kahuna kernel: Found OPL3-SAx (YMF719)
May 16 14:42:35 kahuna kernel: ad1848: Interrupt test failed (IRQ5)
May 16 14:42:35 kahuna kernel: YM3812 and OPL-3 driver Copyright (C) by Hannu Sa
volainen, Rob Hooft 1993-1996
L'erreur n'apparait pas toujours et ne change rien au comportement du système par la suite.
Voilà, si quelqu'un a une idée ?
Merci d'avance
Sébastien
--
__ __ _
| \/ | ___ ___ ___ ___ | | Sébastien KALT
| |\/| |/ _ \ / _ \ / _ \ / _ \ | |
| | | | (_) | (_) | (_) | (_) | |_| ustilago@bigfoot.com
|_| |_|\___/ \___/ \___/ \___/ (_) http://ustilago.ifrance.com/
______________________________________________________________________________
message envoye depuis http://www.ifrance.com
emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums
Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement)
Reply to: