--- Begin Message ---
Source: beginend-el
Version: 2.3.0-1
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
User: lucas@debian.org
Usertags: ftbfs-20230203 ftbfs-bookworm
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[1]: Entering directory '/<<PKGBUILDDIR>>'
> skipping upstream build
> make[1]: Leaving directory '/<<PKGBUILDDIR>>'
> dh_elpa_test
> buttercup -L .
> Loading /etc/emacs/site-start.d/00debian.el (source)...
> Loading /etc/emacs/site-start.d/50autoconf.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Running 40 specs.
>
> beginend in a dired buffer
> ignores . and .. at the beginningMark set
>
> [32m ignores . and .. at the beginning[0m (37.46ms)
> ignores . and .. at the endMark set
>
> [32m ignores . and .. at the end[0m (7.07ms)
> ignores . at the beginning and .. at the endMark set
>
> [32m ignores . at the beginning and .. at the end[0m (6.98ms)
> ignores . and .. in the middleMark set
>
> [32m ignores . and .. in the middle[0m (6.22ms)
> ignores . and .. when they are hiddenMark set
>
> [32m ignores . and .. when they are hidden[0m (5.17ms)
> ignores . and .. when they are not hiddenMark set
>
> [32m ignores . and .. when they are not hidden[0m (10.38ms)
> ignores . and .. when they are hidden and the directory is emptyMark set
>
> [32m ignores . and .. when they are hidden and the directory is empty[0m (4.45ms)
> ignores . and .. when they are not hidden and the directory is emptyMark set
>
> [32m ignores . and .. when they are not hidden and the directory is empty[0m (4.19ms)
>
> beginend
> pushes mark
> when going to beginning
> if point is not at beginningMark set
>
> [31m if point is not at beginning[0m[31m FAILED[0m (71.18ms)
> only onceMark set
>
> [31m only once[0m[31m FAILED[0m (38.91ms)
> when going to end
> if point is not at endMark set
>
> [31m if point is not at end[0m[31m FAILED[0m (26.99ms)
> only onceMark set
>
> [31m only once[0m[31m FAILED[0m (25.86ms)
> does not push mark
> when going to beginning
> if point is already at beginning
> [31m if point is already at beginning[0m[31m FAILED[0m (3.40ms)
> if point is at point-min
> [31m if point is at point-min[0m[31m FAILED[0m (25.63ms)
> when going to end
> if point is already at end
> [31m if point is already at end[0m[31m FAILED[0m (25.09ms)
> if point is at point-max
> [31m if point is at point-max[0m[31m FAILED[0m (26.64ms)
>
> beginend, when narrowing is active,
> goes to point-min if beginning is outside the narrowed region
> [31m goes to point-min if beginning is outside the narrowed region[0m[31m FAILED[0m (3.86ms)
> goes to beginning if beginning is inside the narrowed regionMark set
>
> [31m goes to beginning if beginning is inside the narrowed region[0m[31m FAILED[0m (24.96ms)
> goes to point-max if end is outside the narrowed region
> [31m goes to point-max if end is outside the narrowed region[0m[31m FAILED[0m (25.26ms)
> goes to end if end is inside the narrowed region
> [31m goes to end if end is inside the narrowed region[0m[31m FAILED[0m (29.04ms)
> does not move point
> when going to beginning and beginning outside the narrowed region if point is already at point-min
> [31m when going to beginning and beginning outside the narrowed region if point is already at point-min[0m[31m FAILED[0m (3.46ms)
> when going to end and end outside the narrowed region if point is already at point-max
> [31m when going to end and end outside the narrowed region if point is already at point-max[0m[31m FAILED[0m (26.75ms)
> does not mark
> when going to beginning and beginning outside the narrowed region if point is already at point-min
> [31m when going to beginning and beginning outside the narrowed region if point is already at point-min[0m[31m FAILED[0m (25.69ms)
> when going to end and end outside the narrowed region if point is already at point-max
> [31m when going to end and end outside the narrowed region if point is already at point-max[0m[31m FAILED[0m (25.68ms)
> correctly detects out of bounds
> when point is before point-min
> [31m when point is before point-min[0m[31m FAILED[0m (3.43ms)
> when point is after point-max
> [31m when point is after point-max[0m[31m FAILED[0m (25.50ms)
> when point is between point-min point-max
> [31m when point is between point-min point-max[0m[31m FAILED[0m (32.25ms)
>
> beginend
> in org-mode
> goes back to position 0 if that's a headingMark set
>
> [32m goes back to position 0 if that's a heading[0m (0.14ms)
> goes to second line if that's where the 1st heading is
> [32m goes to second line if that's where the 1st heading is[0m (0.09ms)
> goes to 1st heading if the buffer starts with properties
> [32m goes to 1st heading if the buffer starts with properties[0m (0.08ms)
> goes to (point-min) if there is just one characterMark set
>
> [32m goes to (point-min) if there is just one character[0m (0.11ms)
> stays at (point-min) if buffer is empty
> [32m stays at (point-min) if buffer is empty[0m (0.09ms)
>
> beginend
> in prog-mode
> uses prog-mode-code-position-p to know where code beginsMark set
>
> [32m uses prog-mode-code-position-p to know where code begins[0m (0.10ms)
> uses prog-mode-code-position-p to know where code endMark set
>
> [32m uses prog-mode-code-position-p to know where code end[0m (0.10ms)
> moves point to beginning of first code lineMark set
>
> [32m moves point to beginning of first code line[0m (0.15ms)
> moves point to end of last code lineMark set
>
> [32m moves point to end of last code line[0m (0.16ms)
> beginend--prog-mode-code-position-p
> returns non-nil for a line of code
> [32m returns non-nil for a line of code[0m (0.20ms)
> returns nil
> for a line of comment
> [32m for a line of comment[0m (0.25ms)
> for an empty line
> [32m for an empty line[0m (0.18ms)
> for a line with ^L
> [32m for a line with ^L[0m (0.17ms)
>
> ========================================
> [31mbeginend pushes mark when going to beginning if point is not at beginning[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is not at beginning" #s(bu...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is not at begin...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg0 &rest arg1) (let ((f #'message)) (apply...
> signal(file-missing ((lambda (arg0 &rest arg1) (let ((f #'message)) (apply...
> error: (file-missing (lambda (arg0 &rest arg1) (let ((f #'message)) (apply f arg0 arg1))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend pushes mark when going to beginning only once[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "only once" #s(buttercup-suite "when...
> buttercup--update-with-funcall(#s(buttercup-spec "only once" #s(buttercup-...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg4 &rest arg5) (let ((f #'message)) (apply...
> signal(file-missing ((lambda (arg4 &rest arg5) (let ((f #'message)) (apply...
> error: (file-missing (lambda (arg4 &rest arg5) (let ((f #'message)) (apply f arg4 arg5))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend pushes mark when going to end if point is not at end[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is not at end" #s(buttercu...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is not at end" ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg8 &rest arg9) (let ((f #'message)) (apply...
> signal(file-missing ((lambda (arg8 &rest arg9) (let ((f #'message)) (apply...
> error: (file-missing (lambda (arg8 &rest arg9) (let ((f #'message)) (apply f arg8 arg9))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend pushes mark when going to end only once[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "only once" #s(buttercup-suite "when...
> buttercup--update-with-funcall(#s(buttercup-spec "only once" #s(buttercup-...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg12 &rest arg13) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg12 &rest arg13) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg12 &rest arg13) (let ((f #'message)) (apply f arg12 arg13))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to beginning if point is already at beginning[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is already at beginning" #...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is already at b...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg16 &rest arg17) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg16 &rest arg17) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg16 &rest arg17) (let ((f #'message)) (apply f arg16 arg17))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to beginning if point is at point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is at point-min" #s(butter...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is at point-min...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg20 &rest arg21) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg20 &rest arg21) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg20 &rest arg21) (let ((f #'message)) (apply f arg20 arg21))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to end if point is already at end[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is already at end" #s(butt...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is already at e...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg24 &rest arg25) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg24 &rest arg25) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg24 &rest arg25) (let ((f #'message)) (apply f arg24 arg25))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to end if point is at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is at point-max" #s(butter...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is at point-max...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg28 &rest arg29) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg28 &rest arg29) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg28 &rest arg29) (let ((f #'message)) (apply f arg28 arg29))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to point-min if beginning is outside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to point-min if beginning is o...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to point-min if beg...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg32 &rest arg33) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg32 &rest arg33) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg32 &rest arg33) (let ((f #'message)) (apply f arg32 arg33))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to beginning if beginning is inside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to beginning if beginning is i...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to beginning if beg...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg36 &rest arg37) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg36 &rest arg37) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg36 &rest arg37) (let ((f #'message)) (apply f arg36 arg37))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to point-max if end is outside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to point-max if end is outside...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to point-max if end...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg40 &rest arg41) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg40 &rest arg41) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg40 &rest arg41) (let ((f #'message)) (apply f arg40 arg41))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to end if end is inside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to end if end is inside the na...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to end if end is in...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg44 &rest arg45) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg44 &rest arg45) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg44 &rest arg45) (let ((f #'message)) (apply f arg44 arg45))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not move point when going to beginning and beginning outside the narrowed region if point is already at point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not move point" #s(buttercup...
> buttercup--run-spec(#s(buttercup-spec "when going to beginning and beginni...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to beginning ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg48 &rest arg49) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg48 &rest arg49) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg48 &rest arg49) (let ((f #'message)) (apply f arg48 arg49))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not move point when going to end and end outside the narrowed region if point is already at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not move point" #s(buttercup...
> buttercup--run-spec(#s(buttercup-spec "when going to end and end outside t...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to end and en...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg52 &rest arg53) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg52 &rest arg53) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg52 &rest arg53) (let ((f #'message)) (apply f arg52 arg53))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not mark when going to beginning and beginning outside the narrowed region if point is already at point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not mark" #s(buttercup-suite...
> buttercup--run-spec(#s(buttercup-spec "when going to beginning and beginni...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to beginning ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg56 &rest arg57) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg56 &rest arg57) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg56 &rest arg57) (let ((f #'message)) (apply f arg56 arg57))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not mark when going to end and end outside the narrowed region if point is already at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not mark" #s(buttercup-suite...
> buttercup--run-spec(#s(buttercup-spec "when going to end and end outside t...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to end and en...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg60 &rest arg61) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg60 &rest arg61) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg60 &rest arg61) (let ((f #'message)) (apply f arg60 arg61))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when point is before point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds" ...
> buttercup--run-spec(#s(buttercup-spec "when point is before point-min" #s(...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is before poi...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg64 &rest arg65) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg64 &rest arg65) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg64 &rest arg65) (let ((f #'message)) (apply f arg64 arg65))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when point is after point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds" ...
> buttercup--run-spec(#s(buttercup-spec "when point is after point-max" #s(b...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is after poin...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg68 &rest arg69) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg68 &rest arg69) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg68 &rest arg69) (let ((f #'message)) (apply f arg68 arg69))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when point is between point-min point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds" ...
> buttercup--run-spec(#s(buttercup-spec "when point is between point-min poi...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is between po...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg72 &rest arg73) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg72 &rest arg73) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg72 &rest arg73) (let ((f #'message)) (apply f arg72 arg73))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> Ran 40 specs, [31m19 failed[0m, in 16.29s.
> buttercup-run failed: ""
> dh_elpa_test: error: buttercup -L . returned exit code 255
> make: *** [debian/rules:4: binary] Error 25
The full build log is available from:
http://qa-logs.debian.net/2023/02/03/beginend-el_2.3.0-1_unstable.log
All bugs filed during this archive rebuild are listed at:
https://bugs.debian.org/cgi-bin/pkgreport.cgi?tag=ftbfs-20230203;users=lucas@debian.org
or:
https://udd.debian.org/bugs/?release=na&merged=ign&fnewerval=7&flastmodval=7&fusertag=only&fusertagtag=ftbfs-20230203&fusertaguser=lucas@debian.org&allbugs=1&cseverity=1&ctags=1&caffected=1#results
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
If you reassign this bug to another package, please mark it as 'affects'-ing
this package. See https://www.debian.org/Bugs/server-control#affects
If you fail to reproduce this, please provide a build log and diff it with mine
so that we can identify if something relevant changed in the meantime.
--- End Message ---
--- Begin Message ---
Source: beginend-el
Source-Version: 2.3.0+git20220902.c8fe2cd-1
Done: Lev Lamberov <dogsleg@debian.org>
We believe that the bug you reported is fixed in the latest version of
beginend-el, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 1030483@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Lev Lamberov <dogsleg@debian.org> (supplier of updated beginend-el package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 05 Feb 2023 22:18:57 +0500
Source: beginend-el
Architecture: source
Version: 2.3.0+git20220902.c8fe2cd-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Emacsen team <debian-emacsen@lists.debian.org>
Changed-By: Lev Lamberov <dogsleg@debian.org>
Closes: 1030483
Changes:
beginend-el (2.3.0+git20220902.c8fe2cd-1) unstable; urgency=medium
.
* New upstream version 2.3.0+git20220902.c8fe2cd
* Refresh patch to clean documentation
* Add patch to prevent trampoline compilation for primitive
message (Closes: #1030483). Thanks to Aymeric Agon-Rambosson
* d/control: Declare Standards-Version 4.6.2 (no changes needed)
Checksums-Sha1:
e23f53b7668845d40cf32bb814c7e5f5d51f8739 2151 beginend-el_2.3.0+git20220902.c8fe2cd-1.dsc
7e00f1e857f854e775e071de2f92621e71158082 888165 beginend-el_2.3.0+git20220902.c8fe2cd.orig.tar.gz
d4b439c719c1a26e7bed23d416633a876a5482c0 3484 beginend-el_2.3.0+git20220902.c8fe2cd-1.debian.tar.xz
7ff346b97f27bbf2b72590b3b5197816549461e6 7964 beginend-el_2.3.0+git20220902.c8fe2cd-1_amd64.buildinfo
Checksums-Sha256:
a8e73f748bbfbad21c82e852153150623c454bf07986d5f7ad09aad2dbe2b4f2 2151 beginend-el_2.3.0+git20220902.c8fe2cd-1.dsc
00894efe960a6229ad043ee68cc1dffcb61575c78cfeb0a04afdb72c7f74b85d 888165 beginend-el_2.3.0+git20220902.c8fe2cd.orig.tar.gz
0b765b7f7a33cba09d0141bde574ed2143bc1c99139ca259b373d42c2568324a 3484 beginend-el_2.3.0+git20220902.c8fe2cd-1.debian.tar.xz
798ecece1c526b63ae0e26573cfa3ef7c66df1b9fb13986f82f260e44346bb24 7964 beginend-el_2.3.0+git20220902.c8fe2cd-1_amd64.buildinfo
Files:
62cddf19159e619c32f750ed18c4aa12 2151 lisp optional beginend-el_2.3.0+git20220902.c8fe2cd-1.dsc
c232ebd27040b8ff578408197dbbed00 888165 lisp optional beginend-el_2.3.0+git20220902.c8fe2cd.orig.tar.gz
8bde4464f4ead159048ccd538018f47d 3484 lisp optional beginend-el_2.3.0+git20220902.c8fe2cd-1.debian.tar.xz
68dcbff7dcd8ee8d608564b35041a9ef 7964 lisp optional beginend-el_2.3.0+git20220902.c8fe2cd-1_amd64.buildinfo
-----BEGIN PGP SIGNATURE-----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=1zgn
-----END PGP SIGNATURE-----
--- End Message ---