Bug#1030483: beginend-el: FTBFS: error: (file-missing (lambda (arg72 &rest arg73) (let ((f #'message)) (apply f arg72 arg73))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
Source: beginend-el
Version: 2.3.0-1
Severity: serious
Justification: FTBFS
Tags: bookworm sid ftbfs
User: lucas@debian.org
Usertags: ftbfs-20230203 ftbfs-bookworm
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[1]: Entering directory '/<<PKGBUILDDIR>>'
> skipping upstream build
> make[1]: Leaving directory '/<<PKGBUILDDIR>>'
> dh_elpa_test
> buttercup -L .
> Loading /etc/emacs/site-start.d/00debian.el (source)...
> Loading /etc/emacs/site-start.d/50autoconf.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Loading /<<PKGBUILDDIR>>/test/test-helper.el (source)...
> Running 40 specs.
>
> beginend in a dired buffer
> ignores . and .. at the beginningMark set
>
> [32m ignores . and .. at the beginning[0m (37.46ms)
> ignores . and .. at the endMark set
>
> [32m ignores . and .. at the end[0m (7.07ms)
> ignores . at the beginning and .. at the endMark set
>
> [32m ignores . at the beginning and .. at the end[0m (6.98ms)
> ignores . and .. in the middleMark set
>
> [32m ignores . and .. in the middle[0m (6.22ms)
> ignores . and .. when they are hiddenMark set
>
> [32m ignores . and .. when they are hidden[0m (5.17ms)
> ignores . and .. when they are not hiddenMark set
>
> [32m ignores . and .. when they are not hidden[0m (10.38ms)
> ignores . and .. when they are hidden and the directory is emptyMark set
>
> [32m ignores . and .. when they are hidden and the directory is empty[0m (4.45ms)
> ignores . and .. when they are not hidden and the directory is emptyMark set
>
> [32m ignores . and .. when they are not hidden and the directory is empty[0m (4.19ms)
>
> beginend
> pushes mark
> when going to beginning
> if point is not at beginningMark set
>
> [31m if point is not at beginning[0m[31m FAILED[0m (71.18ms)
> only onceMark set
>
> [31m only once[0m[31m FAILED[0m (38.91ms)
> when going to end
> if point is not at endMark set
>
> [31m if point is not at end[0m[31m FAILED[0m (26.99ms)
> only onceMark set
>
> [31m only once[0m[31m FAILED[0m (25.86ms)
> does not push mark
> when going to beginning
> if point is already at beginning
> [31m if point is already at beginning[0m[31m FAILED[0m (3.40ms)
> if point is at point-min
> [31m if point is at point-min[0m[31m FAILED[0m (25.63ms)
> when going to end
> if point is already at end
> [31m if point is already at end[0m[31m FAILED[0m (25.09ms)
> if point is at point-max
> [31m if point is at point-max[0m[31m FAILED[0m (26.64ms)
>
> beginend, when narrowing is active,
> goes to point-min if beginning is outside the narrowed region
> [31m goes to point-min if beginning is outside the narrowed region[0m[31m FAILED[0m (3.86ms)
> goes to beginning if beginning is inside the narrowed regionMark set
>
> [31m goes to beginning if beginning is inside the narrowed region[0m[31m FAILED[0m (24.96ms)
> goes to point-max if end is outside the narrowed region
> [31m goes to point-max if end is outside the narrowed region[0m[31m FAILED[0m (25.26ms)
> goes to end if end is inside the narrowed region
> [31m goes to end if end is inside the narrowed region[0m[31m FAILED[0m (29.04ms)
> does not move point
> when going to beginning and beginning outside the narrowed region if point is already at point-min
> [31m when going to beginning and beginning outside the narrowed region if point is already at point-min[0m[31m FAILED[0m (3.46ms)
> when going to end and end outside the narrowed region if point is already at point-max
> [31m when going to end and end outside the narrowed region if point is already at point-max[0m[31m FAILED[0m (26.75ms)
> does not mark
> when going to beginning and beginning outside the narrowed region if point is already at point-min
> [31m when going to beginning and beginning outside the narrowed region if point is already at point-min[0m[31m FAILED[0m (25.69ms)
> when going to end and end outside the narrowed region if point is already at point-max
> [31m when going to end and end outside the narrowed region if point is already at point-max[0m[31m FAILED[0m (25.68ms)
> correctly detects out of bounds
> when point is before point-min
> [31m when point is before point-min[0m[31m FAILED[0m (3.43ms)
> when point is after point-max
> [31m when point is after point-max[0m[31m FAILED[0m (25.50ms)
> when point is between point-min point-max
> [31m when point is between point-min point-max[0m[31m FAILED[0m (32.25ms)
>
> beginend
> in org-mode
> goes back to position 0 if that's a headingMark set
>
> [32m goes back to position 0 if that's a heading[0m (0.14ms)
> goes to second line if that's where the 1st heading is
> [32m goes to second line if that's where the 1st heading is[0m (0.09ms)
> goes to 1st heading if the buffer starts with properties
> [32m goes to 1st heading if the buffer starts with properties[0m (0.08ms)
> goes to (point-min) if there is just one characterMark set
>
> [32m goes to (point-min) if there is just one character[0m (0.11ms)
> stays at (point-min) if buffer is empty
> [32m stays at (point-min) if buffer is empty[0m (0.09ms)
>
> beginend
> in prog-mode
> uses prog-mode-code-position-p to know where code beginsMark set
>
> [32m uses prog-mode-code-position-p to know where code begins[0m (0.10ms)
> uses prog-mode-code-position-p to know where code endMark set
>
> [32m uses prog-mode-code-position-p to know where code end[0m (0.10ms)
> moves point to beginning of first code lineMark set
>
> [32m moves point to beginning of first code line[0m (0.15ms)
> moves point to end of last code lineMark set
>
> [32m moves point to end of last code line[0m (0.16ms)
> beginend--prog-mode-code-position-p
> returns non-nil for a line of code
> [32m returns non-nil for a line of code[0m (0.20ms)
> returns nil
> for a line of comment
> [32m for a line of comment[0m (0.25ms)
> for an empty line
> [32m for an empty line[0m (0.18ms)
> for a line with ^L
> [32m for a line with ^L[0m (0.17ms)
>
> ========================================
> [31mbeginend pushes mark when going to beginning if point is not at beginning[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is not at beginning" #s(bu...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is not at begin...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg0 &rest arg1) (let ((f #'message)) (apply...
> signal(file-missing ((lambda (arg0 &rest arg1) (let ((f #'message)) (apply...
> error: (file-missing (lambda (arg0 &rest arg1) (let ((f #'message)) (apply f arg0 arg1))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend pushes mark when going to beginning only once[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "only once" #s(buttercup-suite "when...
> buttercup--update-with-funcall(#s(buttercup-spec "only once" #s(buttercup-...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg4 &rest arg5) (let ((f #'message)) (apply...
> signal(file-missing ((lambda (arg4 &rest arg5) (let ((f #'message)) (apply...
> error: (file-missing (lambda (arg4 &rest arg5) (let ((f #'message)) (apply f arg4 arg5))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend pushes mark when going to end if point is not at end[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is not at end" #s(buttercu...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is not at end" ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg8 &rest arg9) (let ((f #'message)) (apply...
> signal(file-missing ((lambda (arg8 &rest arg9) (let ((f #'message)) (apply...
> error: (file-missing (lambda (arg8 &rest arg9) (let ((f #'message)) (apply f arg8 arg9))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend pushes mark when going to end only once[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "pushes mark" #s(buttercup-suite "...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "only once" #s(buttercup-suite "when...
> buttercup--update-with-funcall(#s(buttercup-spec "only once" #s(buttercup-...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg12 &rest arg13) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg12 &rest arg13) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg12 &rest arg13) (let ((f #'message)) (apply f arg12 arg13))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to beginning if point is already at beginning[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is already at beginning" #...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is already at b...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg16 &rest arg17) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg16 &rest arg17) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg16 &rest arg17) (let ((f #'message)) (apply f arg16 arg17))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to beginning if point is at point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to beginning" #s(butte...
> buttercup--run-spec(#s(buttercup-spec "if point is at point-min" #s(butter...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is at point-min...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg20 &rest arg21) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg20 &rest arg21) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg20 &rest arg21) (let ((f #'message)) (apply f arg20 arg21))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to end if point is already at end[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is already at end" #s(butt...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is already at e...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg24 &rest arg25) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg24 &rest arg25) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg24 &rest arg25) (let ((f #'message)) (apply f arg24 arg25))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend does not push mark when going to end if point is at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend" nil passed nil nil (255...
> buttercup--run-suite(#s(buttercup-suite "does not push mark" #s(buttercup-...
> buttercup--run-suite(#s(buttercup-suite "when going to end" #s(buttercup-s...
> buttercup--run-spec(#s(buttercup-spec "if point is at point-max" #s(butter...
> buttercup--update-with-funcall(#s(buttercup-spec "if point is at point-max...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg28 &rest arg29) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg28 &rest arg29) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg28 &rest arg29) (let ((f #'message)) (apply f arg28 arg29))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to point-min if beginning is outside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to point-min if beginning is o...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to point-min if beg...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg32 &rest arg33) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg32 &rest arg33) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg32 &rest arg33) (let ((f #'message)) (apply f arg32 arg33))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to beginning if beginning is inside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to beginning if beginning is i...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to beginning if beg...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg36 &rest arg37) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg36 &rest arg37) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg36 &rest arg37) (let ((f #'message)) (apply f arg36 arg37))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to point-max if end is outside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to point-max if end is outside...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to point-max if end...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg40 &rest arg41) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg40 &rest arg41) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg40 &rest arg41) (let ((f #'message)) (apply f arg40 arg41))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, goes to end if end is inside the narrowed region[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-spec(#s(buttercup-spec "goes to end if end is inside the na...
> buttercup--update-with-funcall(#s(buttercup-spec "goes to end if end is in...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg44 &rest arg45) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg44 &rest arg45) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg44 &rest arg45) (let ((f #'message)) (apply f arg44 arg45))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not move point when going to beginning and beginning outside the narrowed region if point is already at point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not move point" #s(buttercup...
> buttercup--run-spec(#s(buttercup-spec "when going to beginning and beginni...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to beginning ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg48 &rest arg49) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg48 &rest arg49) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg48 &rest arg49) (let ((f #'message)) (apply f arg48 arg49))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not move point when going to end and end outside the narrowed region if point is already at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not move point" #s(buttercup...
> buttercup--run-spec(#s(buttercup-spec "when going to end and end outside t...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to end and en...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg52 &rest arg53) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg52 &rest arg53) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg52 &rest arg53) (let ((f #'message)) (apply f arg52 arg53))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not mark when going to beginning and beginning outside the narrowed region if point is already at point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not mark" #s(buttercup-suite...
> buttercup--run-spec(#s(buttercup-spec "when going to beginning and beginni...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to beginning ...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg56 &rest arg57) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg56 &rest arg57) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg56 &rest arg57) (let ((f #'message)) (apply f arg56 arg57))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, does not mark when going to end and end outside the narrowed region if point is already at point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "does not mark" #s(buttercup-suite...
> buttercup--run-spec(#s(buttercup-spec "when going to end and end outside t...
> buttercup--update-with-funcall(#s(buttercup-spec "when going to end and en...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg60 &rest arg61) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg60 &rest arg61) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg60 &rest arg61) (let ((f #'message)) (apply f arg60 arg61))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when point is before point-min[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds" ...
> buttercup--run-spec(#s(buttercup-spec "when point is before point-min" #s(...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is before poi...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg64 &rest arg65) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg64 &rest arg65) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg64 &rest arg65) (let ((f #'message)) (apply f arg64 arg65))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when point is after point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds" ...
> buttercup--run-spec(#s(buttercup-spec "when point is after point-max" #s(b...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is after poin...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg68 &rest arg69) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg68 &rest arg69) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg68 &rest arg69) (let ((f #'message)) (apply f arg68 arg69))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> ========================================
> [31mbeginend, when narrowing is active, correctly detects out of bounds when point is between point-min point-max[0m
>
> Traceback (most recent call last):
> normal-top-level()
> command-line()
> command-line-1(("-L" "." "-l" "buttercup" "-f" "buttercup-run-discover" "-...
> buttercup-run-discover()
> buttercup-run()
> buttercup--run-suites((#s(buttercup-suite "beginend in a dired buffer" nil...
> mapc(buttercup--run-suite (#s(buttercup-suite "beginend in a dired buffer"...
> buttercup--run-suite(#s(buttercup-suite "beginend, when narrowing is activ...
> buttercup--run-suite(#s(buttercup-suite "correctly detects out of bounds" ...
> buttercup--run-spec(#s(buttercup-spec "when point is between point-min poi...
> buttercup--update-with-funcall(#s(buttercup-spec "when point is between po...
> apply(buttercup--funcall (closure (t) nil (spy-on 'message)) nil)
> buttercup--funcall((closure (t) nil (spy-on 'message)))
> apply((closure (t) nil (spy-on 'message)) nil)
> (closure (t) nil (spy-on 'message))()
> spy-on(message)
> buttercup--spy-on-and-call-replacement(message (lambda (&rest args) nil nil))
> comp-subr-trampoline-install(message)
> comp-trampoline-compile(message)
> comp--native-compile((lambda (arg72 &rest arg73) (let ((f #'message)) (app...
> signal(file-missing ((lambda (arg72 &rest arg73) (let ((f #'message)) (app...
> error: (file-missing (lambda (arg72 &rest arg73) (let ((f #'message)) (apply f arg72 arg73))) "Setting current directory" "No such file or directory" "/tmp/temp-fs-MQAR3w")
>
> Ran 40 specs, [31m19 failed[0m, in 16.29s.
> buttercup-run failed: ""
> dh_elpa_test: error: buttercup -L . returned exit code 255
> make: *** [debian/rules:4: binary] Error 25
The full build log is available from:
http://qa-logs.debian.net/2023/02/03/beginend-el_2.3.0-1_unstable.log
All bugs filed during this archive rebuild are listed at:
https://bugs.debian.org/cgi-bin/pkgreport.cgi?tag=ftbfs-20230203;users=lucas@debian.org
or:
https://udd.debian.org/bugs/?release=na&merged=ign&fnewerval=7&flastmodval=7&fusertag=only&fusertagtag=ftbfs-20230203&fusertaguser=lucas@debian.org&allbugs=1&cseverity=1&ctags=1&caffected=1#results
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
If you reassign this bug to another package, please mark it as 'affects'-ing
this package. See https://www.debian.org/Bugs/server-control#affects
If you fail to reproduce this, please provide a build log and diff it with mine
so that we can identify if something relevant changed in the meantime.
Reply to: