Druckerproblem am Tjener
Hallo Leute,
habe ein Problem mit dem Drucker Samsung ML 1520 am tjener
1) Der Drucker wird erkannt und ohne Fehlermeldung eingerichtet (kprinter)
2) Cups listet den Drucker
3) Der Drucker arbeitet mit anderen Linuxsystemen ohne Probleme
4) Wenn ich den Drucker neu einschalte meldet cups, dass der Drucker bereit ist
5) Nach dem ersten Druckauftrag meint Cups, dass der Drucker nicht angeschlossen ist
Hat jemand eine Idee??
Gruß
Christoph
Hier in paar Systemmeldungen
Kernelmeldung:
usb 1-2: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3256
tjener:/var/log/cups# lsusb
Bus 001 Device 003: ID 04e8:3256 Samsung Electronics Co., Ltd
Bus 001 Device 001: ID 0000:0000
/var/log/cups/error_log
I [19/May/2008:08:49:43 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13634)
I [19/May/2008:08:50:04 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=14027)
I [19/May/2008:08:50:18 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=14033)
I [19/May/2008:08:50:18 +0200] Saving printers.conf...
I [19/May/2008:08:50:18 +0200] Printer "Samsung" modified by "root".
I [19/May/2008:08:50:22 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14035)
I [19/May/2008:08:50:28 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14037)
I [19/May/2008:08:50:28 +0200] Adding start banner page "none" to job 17.
I [19/May/2008:08:50:28 +0200] Adding end banner page "none" to job 17.
I [19/May/2008:08:50:28 +0200] Job 17 queued on "Samsung" by "root".
I [19/May/2008:08:50:28 +0200] Started filter /usr/lib/cups/filter/pstops (PID 14038) for job 17.
I [19/May/2008:08:50:28 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 14039) for job 17.
I [19/May/2008:08:50:28 +0200] Started backend /usr/lib/cups/backend/usb (PID 14040) for job 17.
I [19/May/2008:08:50:30 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14055)
I [19/May/2008:08:50:31 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14056)
I [19/May/2008:08:50:34 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14057)
I [19/May/2008:08:50:45 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14058)
I [19/May/2008:08:50:58 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14068)
I [19/May/2008:08:51:11 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14071)
I [19/May/2008:08:51:24 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14072)
I [19/May/2008:08:51:37 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14074)
I [19/May/2008:08:51:50 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14076)
I [19/May/2008:08:52:03 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14077)
I [19/May/2008:08:52:16 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14111)
I [19/May/2008:08:52:29 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14117)
I [19/May/2008:08:52:42 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14118)
I [19/May/2008:08:52:55 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14133)
I [19/May/2008:08:53:08 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=14135)
(END)
kern.log
May 19 08:15:03 tjener kernel: usb 1-2: new full speed USB device using ohci_hcd and address 3
May 19 08:15:03 tjener kernel: usb 1-2: configuration #1 chosen from 1 choice
May 19 08:15:03 tjener kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3256
May 19 08:16:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:17:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:20:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:22:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:25:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:27:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:30:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:32:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:35:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:37:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:40:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:42:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:45:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:47:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:50:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:52:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:55:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 08:57:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:00:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:02:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:05:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:07:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:08:59 tjener kernel: e100: eth0: e100_watchdog: link down
May 19 09:09:05 tjener kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
May 19 09:10:03 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:12:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:15:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:17:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:20:02 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:22:29 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
May 19 09:25:03 ltsp249 kernel: end_request: I/O error, dev fd0, sector 0
Reply to: