Bug#2980: dip gets proxy-arp wrong
Package: netstd
Version: 2.03-1
In my syslog I see:
May 13 11:26:35 chiark dip[6541]: Szenda connecting zenda.chu.cam.ac.uk/131.111.131.173 to local server 10.0.0.1/10.0.0.1 with CSLIP6/600
May 13 11:26:38 chiark dip[6541]: found interface eth0 for proxy arp
May 13 11:26:38 chiark dip[6541]: Szenda dial-up 10.0.0.1/10.0.0.1 to remote zenda.chu.cam.ac.uk/131.111.131.173 with CSLIP6/600
However, when I look at the arp table I can see that the hardware
address has been mangled:
chiark:~> arp -a
Address HWtype HWaddress Flags Mask Iface
icarus.chu.cam.ac.uk ether 00:00:E8:C7:FF:C9 C * eth0
myrddin.chu.cam.ac.uk ether 00:20:AF:D6:A9:26 C * eth0
darkstar.chu.cam.ac.uk ether 00:00:E8:C8:01:AF C * eth0
hammer.chu.cam.ac.uk ether 00:40:95:15:40:96 C * eth0
route-west-1.cam.ac.uk ether 00:00:0C:04:FE:2B C * eth0
zenda.chu.cam.ac.uk ether 01:00:02:60:8C:6B CMP * eth0
chiark:~> ifconfig eth0
eth0 Link encap:10Mbps Ethernet HWaddr 02:60:8C:6B:0E:FB
inet addr:131.111.131.114 Bcast:131.111.131.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:251878 errors:0 dropped:0 overruns:0
TX packets:141911 errors:0 dropped:0 overruns:0
Interrupt:5 Base address:0x2e0 Memory:d8000-da000
chiark:~>
Ian.
Reply to: